Onkyo TX-DS676, TX-DS777 Playing a digital source Digital Input Setup, Digital input setup

Page 23

Setting the Speaker level

3

* Bass Peak Setup *

Bass Peak Level

Limiter = Yes

Peak Level =+18dB

Starting

The Test Tone

4

* Bass Peak Setup *

1.Turn Volume Up.

2.When Sound Distorts.

3.Press ENTER.

Level -31dB

•Using the on-screen display

1.Press the OSD MENU button.

2.Select “Speaker Setup” and then press the right edge of the ENTER/Cursor button.

3.Select “Bass Peak Setup” and then press the right edge of the ENTER/Cursor button.

The “Bass Peak Setup” screen appears.

Bass Peak Level Limiter : Turns Yes/No the bass peak limiter. The bass peak level when the bass peak limiter is turned Yes is indicated as “Peak Level.”

4.Select “Starting The Test Tone” and then press the right edge of the ENTER/Cursor button.

This generates a test signal and automatically sets the unit's MASTER VOLUME control knob to -27 dB.

You can now press the right and left edges of the ENTER/Cur- sor button to adjust the peak level in units of 1 dB.

5.Press the ENTER/Cursor button just before the sound is dis- torted.

The bass peak level is stored and the Speaker Setup screen is displayed again.

Playing a digital source (Digital Input Setup)

2

DIGITAL/

 

 

 

 

STEREO

 

ANALOG

 

SPEAKERS

 

 

 

 

A

 

PCM DIGITAL

DIRECT

 

 

 

 

 

 

 

 

3

PRESET/MODE ADJ

PUSH TO ENTER

PRESET/MODE ADJ

PUSH TO ENTER

Digital input setup

Each of the DVD, CD, VIDEO 1-3, and TAPE input channels can be set so that it accepts analog or digital audio input. The default setting is below. Change the setting according to the connection.

DVD: OPT2

VIDEO1: COAX1

VIDEO2: – – – –

VIDEO3: COAX2

TAPE: – – – –

CD: OPT1

Assume that you have connected a DVD player to the COAXIAL 1 connector.

1.Press the DVD input selector button.

2.Press the DIGITAL/ANALOG button until "Digital In- put?" appears.

3.Press the SMART SCAN CONTROLLER. The digital input setup mode has been set.

By rotating the SMART SCAN CONTROLLER, select the digi- tal audio input connector “COAX 1,” from among “OPT 1,” “OPT 2,” “COAX 1,” “COAX 2” and “– – – – .” Selecting “– – – –”sets analog audio input.

4.Press the SMART SCAN CONTROLLER. This completes the digital input setup.

To select an input source using the on-screen display, follow steps 1 through 3 described on page 29.

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents TX-DS777 TX-DS676 Carts and Stands The appliance Important SafeguardsPrecautions Features Using the remote controller Setting the AM tuning step frequency Worldwide models onlySetting the Voltage selector Worldwide models only Installing the remote controller batteriesCAL, whichever appropriate Audio equipment connectionsAC outlet connection Connections for remote control zAudio equipment connections Digital Digital audio connections Connecting video equipment through S-video connectorsVideo equipment connections Decoder with 5.1 channel outputSubwoofer Connecting speakersSpeaker placement Right and Left surround speakersOhms min./speaker Connecting speakersConnecting the speaker cable Or B 6 ohms min./speakerConnecting power amplifiers Connecting power amplifiersConnecting a subwoofer Remove the jumper plugs Connecting an equalizer TX-DS777Connecting the power Connecting the powerAssembling the AM loop antenna Connecting the antenna cableMaking antenna connections Directional IinkageMaking antenna connections Connecting the included antennasConnecting an FM outdoor antenna Connecting an AM outdoor antennaScreen Setup Using the on-screen displaySetting the NTSC/PAL format European/worldwide model only How to use the on-screen displayOSD screens Using the on-screen displayTroller Setting the speaker configurationSetting the speaker configuration parameters Center Select the size of your center speaker Setting the speaker configurationUsing the on-screen display Front Select the size of your front speakersSetting the speaker distance Using Test button on the remote controller Setting the speaker LevelUsing the test tone to adjust the speaker output levels Rotate the Smart Scan Controller to select Yes or No Setting the Speaker levelDigital input setup Playing a digital source Digital Input SetupTuning in a radio station Presetting FM/AM radio stationsProgramming radio stations Preset ting FM/AM radio stationsStart playing the selected input source Adjust the sound volume to an appropriate levelSelecting an input source Sleep Selecting an input source using the on-screen displayMode Audio Selecting an input sourceDTS DTS signal processing Setting the input signal format Digital Input SetupAnalog Analog audio signal processing PCM PCM signal processingCoaxial Selecting the speaker system Selecting Speaker system a Speakers a indicator appearsSelecting Speaker system B Speakers B indicator appears Input signal formatAdjusting the tone Bass and treble adjustment Muting the sound Muting function, remote controller onlyRotate the Smart Scan Controller Selecting a preset stationPress the Multi CH Input button Setting the Multi Channel InputUsing the front panel Playing a multichannel input sourceUsing the Listening Modes Using the listening modes Dial norm Using the listening modesSelecting an Listening mode using the on-screen display THXDTS Mpeg Input sources and listening modesHow to set the listening mode parameters Setting the listening mode parametersSetting the listening mode parameters Assigning a video source to each audio input source To erase a name Giving a name to each preset radio stationGiving a name to each input source To change a nameRepeat the operation described in step Fine-tuning the output level of each speakerTo use the above setting from now on Press the CH Level buttonIntelliVolume setup Other setup operationsVolume display method setup Recording from on audio /video source Recording a sourceRecording a source while listening to music or a MovieRotate the Smart Scan Controller to select Source Recording a sourceAdding sound to a video tape Receiving RDS broadcasts European models only What is RDS?Displaying Radio Text RT Receiving RDS broadcasts European models onlyRecording a source while listening to music or a movie Searching for traffic information TP scanInitial settings Controlling the TX-DS777/TX-DS676 Using the remote controllerControlling an Onkyo DVD player Using the remote controllerREC o Mode SAT, CABLE, VCR, and TV buttonsControlling an Onkyo MD recorder Controlling an Onkyo tape deckRepeat Steps 3-4 to program other buttons in the same Mode Programming procedurePress and release the same button again Erasing a learned code from a Mode buttonPress and release the same Mode button again Erasing a learned codePress the Macro Mode button to complete program- ming Using a Macro functionWhat is a Macro function? Programming Macro modeMacro Direct Learning function Using a Macro functionPress the Macro Direct button again Press the ENT button Erasing all codes and operations programmed in the buttonsTrouble Cause Remedy Troubleshooting guideVideo & audio Troubleshooting guideAmplifier Section SpecificationsTX-DS777 TX-DS676 SpecificationsSmart Scan Controller 16 Control positions and namesFront panel DisplayControl positions and names Remote controllerOnkyo U.S.A. Corporation
Related manuals
Manual 64 pages 1024 b

TX-DS676, TX-DS777 specifications

The Onkyo TX-DS777 and TX-DS676 are two remarkable receivers from the renowned Japanese audio equipment manufacturer, Onkyo. Both models were designed to deliver high-quality sound experiences, making them ideal for home theater enthusiasts and music lovers alike.

The TX-DS777 is known for its powerful 7.1-channel audio configuration, offering a staggering 100 watts per channel. This model features Dolby Digital and DTS decoding, allowing it to handle immersive surround sound formats expertly. Additionally, the TX-DS777 supports Dolby Pro Logic II, which enhances stereo sources into multi-channel audio, enriching the listening experience. Onkyo's proprietary Wide Range Amplification Technology (WRAT) ensures high-frequency clarity and dynamic range, giving listeners a truly cinematic audio experience.

On the other hand, the TX-DS676 provides 5.1-channel amplification, delivering 90 watts per channel. It also supports both Dolby Digital and DTS formats, making it a suitable option for surround sound enthusiasts who prioritize a robust yet budget-friendly system. Like the TX-DS777, the TX-DS676 features Dolby Pro Logic II, enhancing the use of traditional stereo sources for multi-channel playback.

Both receivers include comprehensive connectivity options, including multiple digital and analog inputs, allowing users to connect various audio sources like DVD players, gaming consoles, and music systems. They come equipped with S-video and composite video inputs, facilitating integration with legacy devices, while the preamp outputs allow for easy connection to external amplifiers for those looking to expand their sound systems.

In terms of ease of use, the TX-DS777 and TX-DS676 offer straightforward on-screen setups and remote controls, enabling users to navigate settings effortlessly. The receivers also feature built-in FM/AM tuners, which provide access to various radio programs, enhancing their versatility.

One notable feature of both models is their capability to support multiple speaker configurations. The receivers allow users to select from various surround sound formats, enabling customization based on their home theater setup. Furthermore, Onkyo's dedication to quality is evident in the construction of these devices, which include high-grade components designed to minimize signal interference and maximize performance.

In summary, the Onkyo TX-DS777 and TX-DS676 are excellent choices for anyone looking to elevate their audio experience. They offer powerful amplification, advanced surround sound processing, and versatile connectivity options, making them standout options in the realm of home theater receivers. Whether for streaming music or enjoying a blockbuster movie, these receivers deliver exceptional performance and reliability.
Top Page Image Contents