Onkyo TX-DS676 Video equipment connections, Decoder with 5.1 channel output, OSD Selector

Video equipment connections

1.Digital audio connections

This receiver has a powerful digital signal processor for use with DVD players, DAT decks, and CD players. The digital inputs, CO- AXIAL 1, 2 and OPTICAL 1, 2can be assigned to individual input selector buttons, so when an input selector button is pressed, the assigned digital input is used instead of the corresponding analog input. (See page 23,29.)

2.Connect your second video cassette deck.

3.Connect your DVD player to COAXIAL or OPTICAL, whichever appropriate.

4.OSD SELECTOR:

Selects whether to output the OSD (On-Screen Display) information with the Video signals or the S-Video signals. Select "S VIDEO" when the monitor is connected via the S-Video terminal.

5.Connecting video equipment through S-video connectors

•The signals input from the S IN jack will be output only to the S OUT jack; the signals input from the V IN jack will be output only to the V OUT jack.

•For information on whether you need to connect either S or V jack or both of them, please refer to the instruction manual that came with your video equipment.

6.Connect your video camera or TV game machine to the VIDEO-4 / VIDEO CAM INPUT jacks.

If a momaural video camera is used, connect its audio connection cable to “ R(MONO)” audio jack.

Notes:

•When using a playback-only VCR, connect it to VIDEO 3 or VIDEO 4. If you connect it to VIDEO 1 or VIDEO 2, you need to make only the input connections.

•This receiver can be used with only a monitor TV equipped with a video input or S video jack.

•Interference may be caused between the TV and this receiver. If this interference occurs, place the receiver and the TV as far apart as possible. We do not recommend the use of a common TV/FM antenna (see antenna section).

•Remove the protective cap attached to the DIGITAL INPUT/OUTPUT (OPTICAL) jack before making the connection. When this jack is not used, replace the protective cap.

Connecting equipment with 5.1-channel output

Decoder with 5.1 channel output

You may connect the 5.1 channel outputs of an external decoder (such as MPEG decoder and DVD player) to the MULTI CHANNEL INPUTs of this unit.

:Signal flow

FRONT

SUB

WOOFER

CENTER

SURROUND

MULTI CHANNEL

INPUT

RL

DVD player or a decoder with Multi (5.1) channel outputs

Multi (5.1) channel outputs

Front Subwoofer Center Surround

FRONT OUT

SUBWOOFER OUT

CENTER OUT

SURROUND OUT

DIGITAL INPUT	R	L	R	L	V	S	SURROUND SPEAKERS	FRONT SPEAKERS A
	AMP IN

	FRONT				OUT
COAXIAL				VIDEO-1	ANTENNA
1	PRE OUT
						R	L	R	L
	FRONT				IN
COAXIAL					AM
2	SUB
OPTICAL	WOOFER				OUT			CENTER
1	CENTER			VIDEO-2				SPEAKER
					IN			CAUTION: SPEAKER IMPEDANCE
OPTICAL	SURROUND				FM	R	L	6 OHMS MIN. / SPEAKER
2					75
	FRONT			VIDEO-3	IN
OPTICAL
	SUB			DVD				AC OUTLETS
	WOOFER				IN	FRONT SPEAKERS B		AC 120V 60Hz
DIGITAL OUTPUT
					AV RECEIVER			SWITCHED
	CENTER							TOTAL 120W 1A MAX.
	SURROUND		(REC)	MONITOR	MODEL NO. TX-DS777
	MULTI CHANNEL
	INPUT	L	OUT	OUT
	R		TAPE	V	S
	CD		IN
			(PLAY)
	GMD	R	L	VIDEO
	PHONO			S VIDEO
				OSD SELECTOR

R L

REMOTE

CONTROL

TX-DS777

R L V S

DVD

IN

AUDIO OUT

VIDEO OUT

9