Onkyo TX-DS777, TX-DS676 Fine-tuning the output level of each speaker, Press the CH Level button

Page 42

Adjusting the output level of each speaker while listening to it

1

CH LEVEL

SPEAKERS

 

STEREO

 

 

 

PCM DIGITAL

A

 

 

2.3

PRESET/MODE ADJ

PUSH TO ENTER

PRESET/MODE ADJ

PUSH TO ENTER

db

Fine-tuning the output level of each speaker

You can fine-tune the output level of each speaker according to your taste.

The output levels you set as below will be lost once the unit is in stand-by mode. (The speaker levels you set using the test tone will be restored.)

1.Press the CH LEVEL button.

The output level of the Left front speaker is displayed.

2.Rotate the SMART SCAN CONTROLLER to select the out- put level and then press the SMART SCAN CONTROL- LER.

You can now adjust the output level of the center speaker.

3.Repeat the operation described in step 2.

Set the speaker level of each speaker in the following sequence: Left (Left front)CenterRight (Right front)R-sur (Right surround)L-sur (Left surround)Subwoofer (Subwoofer)

You can adjust the output level of each speaker in the range of -12 to +12 dB.

The adjustment range of the subwoofer is -30 to +10 dB.

To use the above setting from now on...

The above setting will be overwritten by the speaker output levels you set through the test tone, once you press the TEST button on the remote control- ler.

1

2

3

•Adjusting the output level of each speaker using the remote controller

1.Press the MODE AUDIO button.

2.Press the CH SEL button repeatedly to select the speaker whose output level you wish to fine-adjust.

Each time you press the CH SEL button, the output level of the speaker displayed is changed in the following sequence:

Left (Left front) Center Right (Right front) R-sur (Right surround) L-sur (Left surround) Subwoofer (Subwoofer)

3.Press the LEVEL + or - button repeatedly to fine-adjust the output level.

You can adjust the output level of each speaker in the range of - 12 to +12 dB.

The adjustment range of the subwoofer is -30 to +10 dB.

42

Page 41 Page 43
Image 42
Page 41 Page 43
Contents TX-DS777 TX-DS676 Important Safeguards Carts and Stands The appliancePrecautions Features Installing the remote controller batteries Setting the AM tuning step frequency Worldwide models onlySetting the Voltage selector Worldwide models only Using the remote controllerAudio equipment connections CAL, whichever appropriateConnections for remote control z Audio equipment connectionsAC outlet connection Digital Decoder with 5.1 channel output Connecting video equipment through S-video connectorsVideo equipment connections Digital audio connectionsRight and Left surround speakers Connecting speakersSpeaker placement SubwooferOr B 6 ohms min./speaker Connecting speakersConnecting the speaker cable Ohms min./speakerConnecting power amplifiers Connecting a subwooferConnecting power amplifiers Connecting the power Connecting an equalizer TX-DS777Connecting the power Remove the jumper plugsDirectional Iinkage Connecting the antenna cableMaking antenna connections Assembling the AM loop antennaConnecting an AM outdoor antenna Connecting the included antennasConnecting an FM outdoor antenna Making antenna connectionsHow to use the on-screen display Using the on-screen displaySetting the NTSC/PAL format European/worldwide model only Screen SetupUsing the on-screen display OSD screensSetting the speaker configuration Setting the speaker configuration parametersTroller Front Select the size of your front speakers Setting the speaker configurationUsing the on-screen display Center Select the size of your center speakerSetting the speaker distance Setting the speaker Level Using the test tone to adjust the speaker output levelsUsing Test button on the remote controller Setting the Speaker level Rotate the Smart Scan Controller to select Yes or NoPlaying a digital source Digital Input Setup Digital input setupPresetting FM/AM radio stations Tuning in a radio stationPreset ting FM/AM radio stations Programming radio stationsAdjust the sound volume to an appropriate level Selecting an input sourceStart playing the selected input source Selecting an input source Selecting an input source using the on-screen displayMode Audio SleepPCM PCM signal processing Setting the input signal format Digital Input SetupAnalog Analog audio signal processing DTS DTS signal processingCoaxial Input signal format Selecting Speaker system a Speakers a indicator appearsSelecting Speaker system B Speakers B indicator appears Selecting the speaker systemMuting the sound Muting function, remote controller only Adjusting the tone Bass and treble adjustmentSelecting a preset station Rotate the Smart Scan ControllerPlaying a multichannel input source Setting the Multi Channel InputUsing the front panel Press the Multi CH Input buttonUsing the Listening Modes Using the listening modes THX Using the listening modesSelecting an Listening mode using the on-screen display Dial normInput sources and listening modes DTS MpegSetting the listening mode parameters How to set the listening mode parametersSetting the listening mode parameters Assigning a video source to each audio input source To change a name Giving a name to each preset radio stationGiving a name to each input source To erase a namePress the CH Level button Fine-tuning the output level of each speakerTo use the above setting from now on Repeat the operation described in stepOther setup operations Volume display method setupIntelliVolume setup Movie Recording a sourceRecording a source while listening to music or a Recording from on audio /video sourceRecording a source Adding sound to a video tapeRotate the Smart Scan Controller to select Source What is RDS? Receiving RDS broadcasts European models onlySearching for traffic information TP scan Receiving RDS broadcasts European models onlyRecording a source while listening to music or a movie Displaying Radio Text RTInitial settings Using the remote controller Controlling the TX-DS777/TX-DS676Using the remote controller Controlling an Onkyo DVD playerControlling an Onkyo tape deck Mode SAT, CABLE, VCR, and TV buttonsControlling an Onkyo MD recorder REC oProgramming procedure Repeat Steps 3-4 to program other buttons in the same ModeErasing a learned code Erasing a learned code from a Mode buttonPress and release the same Mode button again Press and release the same button againProgramming Macro mode Using a Macro functionWhat is a Macro function? Press the Macro Mode button to complete program- mingUsing a Macro function Macro Direct Learning functionPress the Macro Direct button again Erasing all codes and operations programmed in the buttons Press the ENT buttonTroubleshooting guide Trouble Cause RemedyTroubleshooting guide Video & audioSpecifications Amplifier SectionSpecifications TX-DS777 TX-DS676Display Control positions and namesFront panel Smart Scan Controller 16Remote controller Control positions and namesOnkyo U.S.A. Corporation
Related manuals
Manual 64 pages 1024 b

TX-DS676, TX-DS777 specifications

The Onkyo TX-DS777 and TX-DS676 are two remarkable receivers from the renowned Japanese audio equipment manufacturer, Onkyo. Both models were designed to deliver high-quality sound experiences, making them ideal for home theater enthusiasts and music lovers alike.

The TX-DS777 is known for its powerful 7.1-channel audio configuration, offering a staggering 100 watts per channel. This model features Dolby Digital and DTS decoding, allowing it to handle immersive surround sound formats expertly. Additionally, the TX-DS777 supports Dolby Pro Logic II, which enhances stereo sources into multi-channel audio, enriching the listening experience. Onkyo's proprietary Wide Range Amplification Technology (WRAT) ensures high-frequency clarity and dynamic range, giving listeners a truly cinematic audio experience.

On the other hand, the TX-DS676 provides 5.1-channel amplification, delivering 90 watts per channel. It also supports both Dolby Digital and DTS formats, making it a suitable option for surround sound enthusiasts who prioritize a robust yet budget-friendly system. Like the TX-DS777, the TX-DS676 features Dolby Pro Logic II, enhancing the use of traditional stereo sources for multi-channel playback.

Both receivers include comprehensive connectivity options, including multiple digital and analog inputs, allowing users to connect various audio sources like DVD players, gaming consoles, and music systems. They come equipped with S-video and composite video inputs, facilitating integration with legacy devices, while the preamp outputs allow for easy connection to external amplifiers for those looking to expand their sound systems.

In terms of ease of use, the TX-DS777 and TX-DS676 offer straightforward on-screen setups and remote controls, enabling users to navigate settings effortlessly. The receivers also feature built-in FM/AM tuners, which provide access to various radio programs, enhancing their versatility.

One notable feature of both models is their capability to support multiple speaker configurations. The receivers allow users to select from various surround sound formats, enabling customization based on their home theater setup. Furthermore, Onkyo's dedication to quality is evident in the construction of these devices, which include high-grade components designed to minimize signal interference and maximize performance.

In summary, the Onkyo TX-DS777 and TX-DS676 are excellent choices for anyone looking to elevate their audio experience. They offer powerful amplification, advanced surround sound processing, and versatile connectivity options, making them standout options in the realm of home theater receivers. Whether for streaming music or enjoying a blockbuster movie, these receivers deliver exceptional performance and reliability.
Top Page Image Contents