Onkyo TX-DS676, TX-DS777 Muting the sound Muting function, remote controller only

Page 31

Selecting an input source

Remote controller

Remote controller

 

 

 

 

 

 

 

 

SPEAKERS

 

SLEEP

STEREO

 

 

 

 

 

 

 

 

 

A

 

 

 

AUTO

 

 

 

 

 

 

 

BASS/

TREBLE

4

* Tone Control *

Bass = 0

Treble = +2

Set To Flat

Muting the sound (Muting function, remote controller only)

Use this function to turn off the playback sound immediately. For example, you can use it when you receive a phone call when listen- ing to music.

Press the MUTING button.

The display shows "Muting." Now the sound output to the speakers and headphones stops.

Press the MUTING button again to turn on the sound output.

Note:

The Muting function will be canceled automatically if the receiver is set in the standby mode.

Falling asleep with music (Sleep function, remote controller only)

You can turn off the power to the TX-DS777/676 automatically af- ter a specified time period.

1.Press the MODE AUDIO button.

2.Press the SLEEP button.

The display shows “Sleep 90min,” which means the receiver automatically enters the standby mode after 90 minutes.

3.Press the SLEEP button repeatedly until the desired sleep time is displayed.

Each time you press this button, the time decreases by 10 min- utes.

To check how much time is left before the unit turns off...

Press the SLEEP button when the Sleep function is enabled.

Note:

Pressing the SLEEP button when the Sleep time display shows 10 minutes or less cancels the Sleep function.

Adjusting the tone (Bass and treble adjustment)

The bass and treble levels can be adjusted in the range of +/-12 in units of 2.

You cannot perform this adjustment when the listening mode is “THX” or “Direct.”

1.Press the BASS/TREBLE button. The display shows "Bass=."

Rotate the SMART SCAN CONTROLLER to adjust the bass level.

2.Press the SMART SCAN CONTROLLER. The display shows "Treble=."

Rotate the SMART SCAN CONTROLLER to adjust the treble level.

3.Press the SMART SCAN CONTROLLER.

•Adjusting the bass and treble levels with the on- screen display

1.Press the OSD MENU button.

2.Select "Listening mode Setup" and then press the right edge of the ENTER/Cursor button.

3.Select "Listening Mode" and then press the right edge of the ENTER/Cursor button

4.Select "Tone Control" and then press the right edge of the ENTER/Cursor button.

The "Tone Control Setup" screen appears.

Press the upper or lower edge of the ENTER/Cursor button to select "Bass" or "Treble" and then press the right or left edge of the button to adjust the bass or treble level.

Select “Set to Flat” and then press the right edge of the ENTER/ Cursor button to restore the “flat” bass and treble sound.

5.Press the center of the ENTER/Cursor button, or press the EXIT button, to exit the setup mode.

Note:

 

You cannot perform this adjustment when the listening mode is “Di-

31

rect” or “THX (TX-DS777 only).”

Page 30 Page 32
Image 31
Page 30 Page 32
Contents TX-DS777 TX-DS676 Carts and Stands The appliance Important SafeguardsPrecautions Features Using the remote controller Setting the AM tuning step frequency Worldwide models onlySetting the Voltage selector Worldwide models only Installing the remote controller batteriesCAL, whichever appropriate Audio equipment connectionsAudio equipment connections Connections for remote control zAC outlet connection Digital Digital audio connections Connecting video equipment through S-video connectorsVideo equipment connections Decoder with 5.1 channel outputSubwoofer Connecting speakersSpeaker placement Right and Left surround speakersOhms min./speaker Connecting speakersConnecting the speaker cable Or B 6 ohms min./speakerConnecting a subwoofer Connecting power amplifiersConnecting power amplifiers Remove the jumper plugs Connecting an equalizer TX-DS777Connecting the power Connecting the powerAssembling the AM loop antenna Connecting the antenna cableMaking antenna connections Directional IinkageMaking antenna connections Connecting the included antennasConnecting an FM outdoor antenna Connecting an AM outdoor antennaScreen Setup Using the on-screen displaySetting the NTSC/PAL format European/worldwide model only How to use the on-screen displayOSD screens Using the on-screen displaySetting the speaker configuration parameters Setting the speaker configurationTroller Center Select the size of your center speaker Setting the speaker configurationUsing the on-screen display Front Select the size of your front speakersSetting the speaker distance Using the test tone to adjust the speaker output levels Setting the speaker LevelUsing Test button on the remote controller Rotate the Smart Scan Controller to select Yes or No Setting the Speaker levelDigital input setup Playing a digital source Digital Input SetupTuning in a radio station Presetting FM/AM radio stationsProgramming radio stations Preset ting FM/AM radio stationsSelecting an input source Adjust the sound volume to an appropriate levelStart playing the selected input source Sleep Selecting an input source using the on-screen displayMode Audio Selecting an input sourceDTS DTS signal processing Setting the input signal format Digital Input SetupAnalog Analog audio signal processing PCM PCM signal processingCoaxial Selecting the speaker system Selecting Speaker system a Speakers a indicator appearsSelecting Speaker system B Speakers B indicator appears Input signal formatAdjusting the tone Bass and treble adjustment Muting the sound Muting function, remote controller onlyRotate the Smart Scan Controller Selecting a preset stationPress the Multi CH Input button Setting the Multi Channel InputUsing the front panel Playing a multichannel input sourceUsing the Listening Modes Using the listening modes Dial norm Using the listening modesSelecting an Listening mode using the on-screen display THXDTS Mpeg Input sources and listening modesHow to set the listening mode parameters Setting the listening mode parametersSetting the listening mode parameters Assigning a video source to each audio input source To erase a name Giving a name to each preset radio stationGiving a name to each input source To change a nameRepeat the operation described in step Fine-tuning the output level of each speakerTo use the above setting from now on Press the CH Level buttonVolume display method setup Other setup operationsIntelliVolume setup Recording from on audio /video source Recording a sourceRecording a source while listening to music or a MovieAdding sound to a video tape Recording a sourceRotate the Smart Scan Controller to select Source Receiving RDS broadcasts European models only What is RDS?Displaying Radio Text RT Receiving RDS broadcasts European models onlyRecording a source while listening to music or a movie Searching for traffic information TP scanInitial settings Controlling the TX-DS777/TX-DS676 Using the remote controllerControlling an Onkyo DVD player Using the remote controllerREC o Mode SAT, CABLE, VCR, and TV buttonsControlling an Onkyo MD recorder Controlling an Onkyo tape deckRepeat Steps 3-4 to program other buttons in the same Mode Programming procedurePress and release the same button again Erasing a learned code from a Mode buttonPress and release the same Mode button again Erasing a learned codePress the Macro Mode button to complete program- ming Using a Macro functionWhat is a Macro function? Programming Macro modeMacro Direct Learning function Using a Macro functionPress the Macro Direct button again Press the ENT button Erasing all codes and operations programmed in the buttonsTrouble Cause Remedy Troubleshooting guideVideo & audio Troubleshooting guideAmplifier Section SpecificationsTX-DS777 TX-DS676 SpecificationsSmart Scan Controller 16 Control positions and namesFront panel DisplayControl positions and names Remote controllerOnkyo U.S.A. Corporation
Related manuals
Manual 64 pages 1024 b

TX-DS676, TX-DS777 specifications

The Onkyo TX-DS777 and TX-DS676 are two remarkable receivers from the renowned Japanese audio equipment manufacturer, Onkyo. Both models were designed to deliver high-quality sound experiences, making them ideal for home theater enthusiasts and music lovers alike.

The TX-DS777 is known for its powerful 7.1-channel audio configuration, offering a staggering 100 watts per channel. This model features Dolby Digital and DTS decoding, allowing it to handle immersive surround sound formats expertly. Additionally, the TX-DS777 supports Dolby Pro Logic II, which enhances stereo sources into multi-channel audio, enriching the listening experience. Onkyo's proprietary Wide Range Amplification Technology (WRAT) ensures high-frequency clarity and dynamic range, giving listeners a truly cinematic audio experience.

On the other hand, the TX-DS676 provides 5.1-channel amplification, delivering 90 watts per channel. It also supports both Dolby Digital and DTS formats, making it a suitable option for surround sound enthusiasts who prioritize a robust yet budget-friendly system. Like the TX-DS777, the TX-DS676 features Dolby Pro Logic II, enhancing the use of traditional stereo sources for multi-channel playback.

Both receivers include comprehensive connectivity options, including multiple digital and analog inputs, allowing users to connect various audio sources like DVD players, gaming consoles, and music systems. They come equipped with S-video and composite video inputs, facilitating integration with legacy devices, while the preamp outputs allow for easy connection to external amplifiers for those looking to expand their sound systems.

In terms of ease of use, the TX-DS777 and TX-DS676 offer straightforward on-screen setups and remote controls, enabling users to navigate settings effortlessly. The receivers also feature built-in FM/AM tuners, which provide access to various radio programs, enhancing their versatility.

One notable feature of both models is their capability to support multiple speaker configurations. The receivers allow users to select from various surround sound formats, enabling customization based on their home theater setup. Furthermore, Onkyo's dedication to quality is evident in the construction of these devices, which include high-grade components designed to minimize signal interference and maximize performance.

In summary, the Onkyo TX-DS777 and TX-DS676 are excellent choices for anyone looking to elevate their audio experience. They offer powerful amplification, advanced surround sound processing, and versatile connectivity options, making them standout options in the realm of home theater receivers. Whether for streaming music or enjoying a blockbuster movie, these receivers deliver exceptional performance and reliability.
Top Page Image Contents