Connection, Installation, EN-3 | Mitsubishi Electronics WD3300U

Preparation/SetUp (continued)

Connection

Computer

LAN cable (option) (100BASE-TX or 10BASE-T should be supported.)

To LAN terminal	External HUB
	LAN cable (option)
	(100BASE-TX or 10BASE-T should be supported.)

•Use a straight-through category-5 cable for LAN connection.

•Don’t touch the metal parts of the LAN connector and LAN cable because static electricity may be discharged from your body, causing damage to the projector.

When STANDBY MODE of the INSTALLATION menu of the projector is set to LOW, the LAN network is disabled. To enable the LAN network, set STANDBY MODE to STANDARD. (See page 25 of User Manual of the projector.)

Installation

Before starting installation, be sure to read “ReadMe.txt” contained in the CD-ROM.

1	Copy two files (DI_4.1.3.6.msi and Setup.exe) contained in the Tools folder of CD-ROM to the hard disk of

	your personal computer.

2	Double-click the file named Setup.exe.
	Double-click the file named Setup.exe.

3	When the following window appears, click Next.
	When the following window appears, click Next.