Mitsubishi Electronics WD3300U user manual When using a Dhcp server, EN-6

Page 6

Preparation/SetUp (continued)

When using a DHCP server

5	Select [Obtain an IP address automatically] and click
	Select [Obtain an IP address automatically] and click
	Next.

6	Click Next.
	Click Next.
	• Check that the options are marked with
	checkmarks as shown on the right. Keep them
	unchanged for normal use.

7

Click Assign.

8

Click Finish.

9

Click the Search button.

•Check the IP address.

EN-6

Image 6

Contents LAN Control Utility Contents Major functions Preparation/SetUpPreparation before using the network function System requirementsConnection InstallationPreparation/SetUp EN-3EN-4 Setting the IP address of the projector EN-5When using a Dhcp server EN-6When not using a Dhcp server EN-7Telnet setting EN-8Setting the password Password Setup EN-9Setting the display language of ProjectorView language Setting the LAN control LAN-Controlled ModeEN-10 Setting the PJLink certification PJLink certification Mode Save and exitEN-11 ProjectorView Using the ProjectorViewHow to start up EN-12ProjectorView ProjectorView main screenEN-13 ProjectorView Virtual Remote controller Mail notification functionEN-14 ProjectorView Initial setting EN-15Support for the PJLink function EN-16Support for the PJLink function Terms and definitionsEN-17