Mitsubishi Electronics XD700U, WD720U user manual Basic operation, Power-on, Status Power

Page 17

Basic operation

4

6

5

Power-on

1.Turn on the device connected to the projector first.

2.Plug the power cord in the wall outlet.

•The POWER indicator lights up.

•If the power cord is unplugged from the wall outlet before the projector is cooled down completely after use, the fans may start rotating when the power cord is plugged in next time and the POWER button may not function. In this case, wait for the fans to stop and press the POWER button to light the indicator.

3.Press the POWER button on the control panel or the ON button on the remote control.

•It may take about one minute for the lamp to light up.

•The lamp occasionally fails to light up. Wait a few minutes and try to light the lamp again.

•After the POWER button is pressed, the image may flicker before the lamp becomes stable. This is not a product malfunction.

•Regardless of the setting of Lamp Mode in the

Installation menu, the Standard lamp mode is activated by default whenever the projector is turned on. The Lamp Mode is set to either Standard or Low depending on the setting last selected, and you cannot switch the Lamp Mode in about one minute after the lamp is on.

Indicator

STATUS

POWER

Condition

 

 

Stand-by

-

Red

When the lamp is on.

Green

Green

Important:

•If the lamp exceptionally turned off due to the power interruption or voltage drop, it can happen that the lamp does not turn on even if you switch again the power supply on. In that case, please pull the electric cord out of the consent and put it again in the consent about 10 minutes later.

•Do not cover the lens with the lens cap while the lamp is on.

ON

 

STANDBY

1, 2

3

 

 

 

MAGNIFY

 

 

ASPECT

 

 

 

UP EFFICIENT

 

 

VOL

MODE

 

KEYSTONE

 

DOWN

3D

 

 

 

 

AUTO

 

MENU

 

 

POSITION

 

 

ENTER

 

 

AV

 

 

 

 

MUTE

 

 

FREEZE

 

VIEWER

1

 

VIDEO

 

 

 

 

5

 

2

 

 

 

COMPUTER

 

 

UNPLUG

 

 

S-VIDEO

 

USB DISP. LAN DISP.

DVI

HDMI

 

3, 1, 2

•The projector starts warming up when the POWER button is pressed. During the warm-up process, images may appear dark and no commands are accepted.

•By blinking red, the STATUS indicator indicates that the lamp should be replaced soon. Replace the lamp when the STATUS indicator blinks red. (See page 53 and 57.)

•Images may not be projected with good quality in an extremely hot or cold environment. (This is not a product malfunction.)

•In order to ensure the safety in case of trouble with the projector, use an electrical outlet having an earth leakage breaker to supply the power to the projector. If you do not have such outlet, ask your dealer to install it.

4.Adjust the focus by turning the focus ring.

5.Choose your desired external input source using the COMPUTER, HDMI, LAN DISP., USB DISP., VIEWER, VIDEO, or S-VIDEO button.

•The input source is switched between

Computer1, Computer2, HDMI, LAN Display, USB Display, and PC Less Presentation at every press of the COMPUTER button on the control panel.

•The input source is switched between Video and

S-Video at every press of the VIDEO button on the control panel.

•When pressing the COMPUTER (1 or 2), HDMI,

LAN DISP., USB DISP., VIEWER, VIDEO, or S-VIDEO button on the remote control, the input source switches directly as the button pressed.

•You cannot change the input source while the menu is being displayed.

•When Computer is chosen as the source, images supplied from the computer may flicker. Press the or button on the remote control to reduce flicker, if it occurs.

•To avoid permanently imprinting a fixed image onto your projector, please do not display the same stationary images for long period.

EN-17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents XD700U WD720U Risk of Electric Shock Do not Open Contents Important safeguards Never remove the cabinet Do not modify this equipment Important safeguardsUse correct voltage Do not block the intake and exhaust vents1011 12 13 OverviewControl panel Terminal panel Overview Bottom side Remote controlBattery installation Remote controlOperation range of the remote control Inserting the batteries into the remote controlScreen size and projection distance InstallationFor XD700U For WD720UWhen the aspect ratio of the screen is InstallationWhen the aspect ratio of the image is 1610 Wxga When the aspect ratio of the image isRear projection Ceiling mount installationFront projection, ceiling mounting Projector + DVD player or Hdtv decoder Basic connectionsProjector + AV device Connection for video equipment having an Hdmi terminal Basic connectionsFor computer with mini D-SUB Projector + ComputerPreparation for projection Adjusting the position of the projected imagePreparation When projected images are distorted to a trapezoid Adjustment of the projection angleUsing the adjustment feet front PreparationBasic operation Power-onStatus Power Basic operation When connecting to a laptop computer Watching 3D content Setting the aspect ratioWith the remote control With the Picture menuEN-20 Menu operation You can make various settings using the displayed menusInstallation How to set the menusMenu operation Main MenuMenu items Setting FunctionPicture menu PictureVideo Image Video Image menuSignal Signal menuRGB LPFAudio Audio menuLAN Installation menuEfficient Mode Option Option menuWxga SET Network Config menuDhcp SsidInformation Information menuDescription To adjust the brightness Contrast and Brightness Image adjustmentTo adjust the color Color and Tint To adjust the tone of white Color TempImage Image adjustmentColor Management GammaSimple method to adjust the image position How to adjust the computer imageTo adjust the horizontal position To adjust the vertical positionSetting Projector Name Network settingsNetwork Password settings Enabling or disabling the network certificationIP Config settings Network settingsSetting or clearing Dhcp IP Address settingsDefault Gateway settings Subnet Mask settingsSetting or clearing Dhcp Function Start IP Address settingEncryption setting Wireless SettingSsid setting Channel setting Wireless Setup setting Initialization of network settingsHow to use network function Restart of network functionUSB Display Advanced display utilitiesConnection OperationWhen deleting LAN Display System Uninstallation Important Installation of softwareInstalling LAN Display System Advanced display utilitiesProjection Installing the virtual display driver Using remote desktopHide UI AboutPC Less Presentation Installation of PtG Converter-LiteSelecting a PC Less Presentation input Performing the PC Less PresentationOFF Setting upDisplaying PtG file Displaying Jpeg fileEnding the PC Less Presentation Displaying with AutoRun functionDisplaying with slideshow function Displaying a user-defined image during startup or muting Advanced featuresFreeze MagnifyPassword lock Advanced featuresTo enable or disable password lock To set a passwordMajor functions PJLink supported commands When the projector is mounted to the ceiling Lamp replacementWhen the projector is placed on the table Interval of lamp replacement Lamp replacementReset of the lamp operation time No image appears on the screen Problem Solution TroubleshootingImages are not displayed correctly Problem Solution TroubleshootingOthers Problem Solution Cleaning of the projector and the vents MaintenanceCleaning of the lens Kensington LockCondition Possible Solution IndicatorsNormal condition Abnormal conditionYPBPR/YCBCR SpecificationsConnectors SpecificationsDimension drawings unit mm Replacement part option/not included in the boxEN-60 Zusho Baba, Nagaokakyo-City, Kyoto Japan
Top Page Image Contents