Mitsubishi Electronics XD700U Advanced display utilities, USB Display, Connection, Operation

Page 39

Advanced display utilities

USB Display

You can project the computer images inputted via a USB connection.

You don’t have to install any drivers on your computer to use this function.

Important:

•Supported OS’s are Windows XP, Windows Vista and Windows 7.

•Only 1-to-1 screen projection is supported.

•Moving images cannot be displayed.

Connection

Connect the projector and the computer using a commercially available USB cable.

2.When the computer is connected to the projector, the computer image is automatically displayed on the screen.

3.When ending the USB Display projection, unplug the USB cable from the projector.

•It is not necessary to “Safely Remove Hardware” on the computer or to press the UNPLUG button on the remote control.

Important:

•When the image is projected, the computer resolution will be changed to WXGA/XGA according to the projector model and will be automatically recovered after unplugging the USB cable.

USB 4-pin

(type B)

Computer

USB 4-pin

(type A)

To USB port

To USB-B terminal

USB cable (option)

Important:

•The USB-B terminal on this projector is compatible with USB 2.0.

•Do not use a USB hub between the projector and the computer.

Operation

1.Select a USB Display input by pressing the USB DISP. button on the remote control or the COMPUTER button on the projector.

•Each time you press the COMPUTER button, the input source is switched between Computer1, Computer2, HDMI, LAN Display, USB Display and PC Less Presentation.

•When the USB Display input is selected, the splash screen for USB Display appears on the screen.

EN-39

Image 39

Contents XD700U WD720U Risk of Electric Shock Do not Open Contents Important safeguards Do not block the intake and exhaust vents Important safeguardsNever remove the cabinet Do not modify this equipment Use correct voltageOverview Control panel Terminal panel1011 12 13 Overview Bottom side Remote controlInserting the batteries into the remote control Remote controlBattery installation Operation range of the remote controlFor WD720U InstallationScreen size and projection distance For XD700UWhen the aspect ratio of the image is InstallationWhen the aspect ratio of the screen is When the aspect ratio of the image is 1610 WxgaCeiling mount installation Front projection, ceiling mountingRear projection Basic connections Projector + AV deviceProjector + DVD player or Hdtv decoder Connection for video equipment having an Hdmi terminal Basic connectionsFor computer with mini D-SUB Projector + ComputerAdjusting the position of the projected image PreparationPreparation for projection Preparation Adjustment of the projection angleWhen projected images are distorted to a trapezoid Using the adjustment feet frontPower-on Status PowerBasic operation Basic operation With the Picture menu Setting the aspect ratioWhen connecting to a laptop computer Watching 3D content With the remote controlEN-20 Menu operation You can make various settings using the displayed menusMain Menu How to set the menusInstallation Menu operationPicture Setting FunctionMenu items Picture menuVideo Image Video Image menuLPF Signal menuSignal RGBAudio Audio menuInstallation menu Efﬁcient ModeLAN Option menu WxgaOption Ssid Network Config menuSET DhcpInformation menu DescriptionInformation To adjust the tone of white Color Temp Image adjustmentTo adjust the brightness Contrast and Brightness To adjust the color Color and TintGamma Image adjustmentImage Color ManagementTo adjust the vertical position How to adjust the computer imageSimple method to adjust the image position To adjust the horizontal positionEnabling or disabling the network certification Network settingsSetting Projector Name Network Password settingsIP Address settings Network settingsIP Config settings Setting or clearing DhcpStart IP Address setting Subnet Mask settingsDefault Gateway settings Setting or clearing Dhcp FunctionWireless Setting Ssid setting Channel settingEncryption setting Restart of network function Initialization of network settingsWireless Setup setting How to use network functionOperation Advanced display utilitiesUSB Display ConnectionAdvanced display utilities Installation of softwareWhen deleting LAN Display System Uninstallation Important Installing LAN Display SystemProjection About Using remote desktopInstalling the virtual display driver Hide UIPC Less Presentation Installation of PtG Converter-LiteSelecting a PC Less Presentation input Performing the PC Less PresentationDisplaying Jpeg file Setting upOFF Displaying PtG fileDisplaying with AutoRun function Displaying with slideshow functionEnding the PC Less Presentation Magnify Advanced featuresDisplaying a user-defined image during startup or muting FreezeTo set a password Advanced featuresPassword lock To enable or disable password lockMajor functions PJLink supported commands Lamp replacement When the projector is placed on the tableWhen the projector is mounted to the ceiling Lamp replacement Reset of the lamp operation timeInterval of lamp replacement No image appears on the screen Problem Solution TroubleshootingImages are not displayed correctly Problem Solution TroubleshootingOthers Problem Solution Kensington Lock MaintenanceCleaning of the projector and the vents Cleaning of the lensAbnormal condition IndicatorsCondition Possible Solution Normal conditionYPBPR/YCBCR SpecificationsReplacement part option/not included in the box SpecificationsConnectors Dimension drawings unit mmEN-60 Zusho Baba, Nagaokakyo-City, Kyoto Japan