Advanced features (continued)
Supervising and controlling by computer
You can supervise and control the projector’s operation using a personal computer via a LAN network.
Major functions
ProjectorView Global+
Batch projector controlling / supervising application software
•Batch operation of
•Scheduling function to turn ON/OFF for each day of the week
•Checking each condition of the projector and detecting a theft
•Setting of the projector’s IP Config
•Activating Visual PA2 to display the specified characters on the projector’s screen
•Projector’s Text Speech function to read aloud messages displayed on the Visual PA2 window
AMX Device Discovery
The projector is monitored and controlled by the controller system of AMX.
Crestron RoomView Connected™
The projector is monitored and controlled by the controller system and software of Crestron Electronics, Inc.
PJLink™
This projector supports standard protocol PJLink™ for projector control and you can control and monitor projector’s operations using the same application among projectors of different models and different manufacturers.
About ProjectorView Global+
•For details, see “LAN control UTILITY operation manual” in the
About AMX Device Discovery
•This is a technology suggested by AMX to facilitate configuration of the control system of AMX and its target devices.
For details, see the website of AMX. URL http://www.amx.com/
About Crestron RoomView Connected™
•This is a technology suggested by Crestron
Electronics, Inc. to facilitate configuration of the control system of Crestron and its target devices. For details, see the website of Crestron Electronics, Inc.
URL http://www.crestron.com
URL http://www.crestron.com/getroomview/
About PJLink™
•To use PJLink™ function, the PJLink™ application software is required.
•To use this function, set the network certification properly according to the setting of the network application to be used. (See page 34.)
•For the specifications of PJLink™, access to the Web site of Japan Business Machine and Information System Industries Association (JBMIA). (http://pjlink.jbmia.or.jp/english)
•This projector is fully compliant to the specifications of JBMIA PJLink™ Class 1. It supports all the commands defined by PJLink™ Class 1, and the compliance has been verified with the PJLink™ standard specifications
Version 1.0.
Important:
•For the commands for PJLink™, see the table on the next page.
•The control may not be performed correctly or the monitoring data may not be obtained correctly in the following conditions:
·During standby
·During input source switching
·During auto position execution
·During AV mute
·During command processing
·Before the splash screen disappears after the power is turned on.
•During AV mute, etc., it may take approx. 5 seconds to receive a response to a command.
•Use 1 controller to control/monitor 1 projector.
•For how to control/monitor using PJLink™, see the operation manual of the PJLink™ application you use.
•When you monitor the projector’s operating state using this function by issuing inquiry commands successively, issue an inquiry command after receiving the response to the previous inquiry command from the projector.