Mitsubishi Electronics WL639U user manual Menu operation, How to set the menus

Menu operation (continued)

How to set the menus:

Following describe how to set AUTO POWER OFF time.

1.	Press the MENU button.
	opt.
	IMAGE
2.	Press the  or  button to select a menu to use.
	opt.
	INSTALLATION
3.	Press the ENTER button (or  button).

opt.
INSTALLATION
WALL SCREEN	BEIGE

4. Press the  or  button to select an item to adjust.

AUTO POWER	OFF
ON
AUTO POWER	OFF
OFF

5. Set the selected item by pressing the  or  button.

AUTO POWER	OFF
ON
AUTO POWER	30min
OFF

To cancel the menu:

6. Press the MENU button several times.

Important:

•When the MENU button doesn’t function, unplug the power cord from the wall outlet. Wait about 10 minutes, plug the power cord in, and try again.

•After selecting the items marked with , press the ENTER button.

Available settings in the menus

Set the following items on their relevant menus.

1. IMAGE menu IMAGE - ADVANCED menu

opt. opt.

						IMAGE
	IMAGE
		COLOR	AUTO			ADVANCED MENU
		ENHANCER
		CONTRAST	0			NOISE REDUCTION		ON
		BRIGHTNESS	0			CTI		ON
		COLOR TEMP.	STANDARD			INPUT LEVEL		0
		COLOR	0
		TINT	0
		SHARPNESS	0
		ADVANCED MENU	OK
ITEM					SETTING		FUNCTION
COLOR ENHANCER					AUTO		Select to optimize the settings automatically depending on the input
							signal. (Select this option for normal use.)
				PRESENTATION			Select to make the displayed image look bright and crisp. Suitable mainly
							for projecting computer signals in a well-lit conference room.
					STANDARD		Select to make the displayed image look natural. Suitable for viewing
							video images in a relatively bright room.
					THEATER		This option, suitable for viewing movies, makes the displayed image look
							soft and smooth. Suitable for viewing movies in a dim room.
					sRGB		Select to give priority to the color reproducibility.

•When COLOR ENHANCER is sRGB, COLOR TEMP., COLOR and TINT can’t be adjusted.

	USER	Select to set the gamma curve or adjust the color intensity or color
		balance as desired. (See page 29.)
CONTRAST	±30	Use to adjust the contrast of the projected image. (See page 28.)
BRIGHTNESS	±30	Use to adjust the brightness of the projected image. (See page 28.)
COLOR TEMP.	4 options	Use to adjust the color temperature. (See page 29.)

•COLOR TEMP. is unavailable when WALL SCREEN in the INSTALLA- TION menu is set to other than OFF.

COLOR ±10 Use to adjust the color thickness of the projected image. (See page 28.)

•When the COMPUTER1, COMPUTER2 or DVI is selected as the input source, COLOR can’t be adjusted.

TINT ±10 Use to adjust the color tint of the projected image. (See page 28.)

•When the COMPUTER1, COMPUTER2 or DVI is selected as the input source, TINT can’t be adjusted.

•TINT is available only when the NTSC signal is input.

SHARPNESS	±5	Use to adjust the sharpness of the projected image. (See page 28.)
ADVANCED MENU
NOISE REDUCTION	ON / OFF	Use to reduce noise and roughness in the image when noisy video signal
		is input.
CTI	ON / OFF	Use to correct smeared color boundaries.
INPUT LEVEL	±5	The input level of video signal differs among devices to be connected.
		High input level causes solid white in displayed image and low input level
		causes displayed image to get dark. Use this menu to adjust the input
		level of analog video signal.

EN-23