Mitsubishi Electronics WL639U Wall Screen OFF / Beige, Light Blue, Pink Black Board Lamp Mode

Menu operation (continued)
2. INSTALLATION menu
	opt.
INSTALLATION
	WALL SCREEN	BEIGE
	LAMP MODE	STANDARD
	AUTO POWER	OFF
	ON
	AUTO POWER	OFF
	OFF
	IMAGE	SETUP
	CAPTURE
ON	SPLASH	ON
	SCREEN
	BACK COLOR	BLUE
	MUTE MODE	BLACK
	IMAGE	OFF
	REVERSE
ITEM		SETTING	FUNCTION

WALL SCREEN	OFF / BEIGE			/		Select any option depending on the color of the wall on which images are
	LIGHT BLUE			/		projected. When selecting any option other than BLACK BOARD, you can
	LIGHT GREEN				/	make fine adjustment of color tone (1 to 5). (See page 11.)
	PINK		/ BLACK BOARD
LAMP MODE		STANDARD				Select this option when you want to view images in a well-lit room.
			LOW			Select to moderate the intensity of the lamp. The operating sound is
						reduced and the lamp lifetime becomes longer.

•When the lamp mode is switched, the projected image may flicker. This is not a product malfunction.

•Frequent switching of the lamp mode may damage the lamp.

AUTO POWER ON	ON / OFF	When ON is chosen, the lamp is automatically lit when the power cord is
		plugged in the wall outlet. Choose ON when using the projector mounted
		on the ceiling.

•The projector is in the stand-by mode when the lamp is off. Use the remote control to turn on the lamp.

AUTO POWER OFF	OFF / 5-60min	Use to set the time elapsed before the projector enters the stand-by
		mode when there is no signal input from the source.
IMAGE CAPTURE		Use to capture the screen for the splash screen. See page 32.
SPLASH SCREEN	ON / OFF	Choose ON to display the splash screen when the power is turned on.

•The splash screen can be changed. See page 32.

BACK COLOR	BLUE / BLACK / IMAGE	Use to select the background from among BLUE, BLACK and IMAGE,
		which will be displayed when there is no signal input from the source.
		When IMAGE is selected, the splash screen will be displayed.
MUTE MODE	BLACK / IMAGE	Use to choose the background, either BLACK, or IMAGE, which will be
		displayed when the MUTE button is pressed. When IMAGE is chosen, the
		splash screen will be displayed.
IMAGE REVERSE	OFF	Select when viewing images from the front with the projector installed on
		the floor.
	MIRROR	Select when viewing images projected from the behind of the screen with
		the projector installed on the floor.
	INVERT	Select when viewing images projected from the behind of the screen with
		the projector installed on the ceiling.
	MIRROR INVERT	Select when viewing images from the front with the projector installed on
		the ceiling.

•Regardless of the setting of LAMP MODE in the INSTALLATION menu, the STANDARD lamp mode is activated by default whenever the projector is turned on. When LAMP MODE has been set to LOW, the lamp mode changes from STANDARD to LOW about 1 minute after turn-on.

•WALL SCREEN is unavailable when COLOR ENHANCER is set to sRGB.

•You can’t set IMAGE CAPTURE or SPLASH SCREEN when PASSWORD FUNCTION in the FEATURE menu has been set to SPLASH ID SCREEN to enable the password lock.

•When you continue projection for a long time with BACK COLOR or MUTE MODE set to IMAGE, an afterimage may persist on the screen. (See page 42.)

EN-24