Mitsubishi Electronics WL639U user manual Expand, Picture in Picture PinP, Still

Page 34

Advanced features (continued)

Expand

By pressing the EXPAND button on the remote control, you can magnify the image to view the details.

•The EXPAND mode doesn’t function with some input signals. For details, see page 45.

•The EXPAND mode doesn’t work with video or S-video signal.

EXPAND

Magnified image

To use the EXPAND mode:

1.Press the EXPAND button.

•You can select the area to be magnified by pressing the , , , or button on the remote control.

•You can change the magnification of the selected area by pressing the + or - button.

2.Press the EXPAND button again to exit the EXPAND mode.

•The regular operation screen will appear.

Important:

• In the EXPAND mode, you can’t adjust the volume.

Picture in Picture (PinP)

One of the special features of this projector is the picture-in-picture (PinP) mode. The PinP mode allows you to view the images from different sources at the same time.

To use the PinP mode

1.Press the PinP button on the remote control.

•When you press the PinP button with the image from the COMPUTER/COMPONENT VIDEO IN-1/IN-2 terminal displayed on the screen, the image from the VIDEO IN or S-VIDEO IN terminal is displayed as the sub image.

•When the image from the VIDEO IN or S-VIDEO IN terminal is displayed, the PinP mode isn’t activated.

•When the component video signal is inputted, the PinP mode isn’t activated.

2.If necessary, select the desired external input source of the sub image by using the VIDEO or S-VIDEO button on the remote control or the VIDEO button on the control panel.

3.Press the PinP button on the remote control.

•The PinP mode will be canceled.

To change the position of the sub image: Press the or button on the remote control.

•When there is no video signal for sub image, you can’t change the display position.

Important:

•The motion may not run smoothly in the PinP mode.

•The PinP mode isn’t available with some input signals. For further information, see page 45.

•When the COMPUTER 1 or COMPUTER 2 button on the remote control or the COMPUTER button on the control panel is pressed, the PinP mode will be canceled.

•The PinP mode is available only when the ASPECT ratio is set to AUTO.

Still

To stop the motion in the image temporarily (or to dis- play a still image):

Press the STILL button on the remote control.

• The image will freeze temporarily.

To resume the motion in the image:

Press the STILL button on the remote control again.

Important:

•Do not display a still picture for a long time because the afterimages may persist on the screen. (See page 42.)

EN-34

Page 33 Page 35
Image 34
Page 33 Page 35
Contents WL639 When using the projector in Europe Compliance NoticeContents Important safeguards Important safeguards Inserting the batteries into the remote control Checking accessoriesPreparing your projector Control area Preparating your projectorOverview Terminal boardBottom side Remote controlAbout the laser beam Reception angle Using the remote controlOperational range of the remote control Front of projector Rear of projectorBasic setup Setting up your projectorSetting up the screen Adjusting the projection angleFront projection, ceiling mounting Setting up your projectorWall screen Rear projectionWhen the aspect ratio of the image is When the aspect ratio of the screen isWhen the aspect ratio of the image is 1610 Wxga Screen size and projection distanceConnecting the projector to a computer Viewing computer imagesViewing computer images Plugging the power cordAbout DDC Projecting images To stop projecting When connecting to a notebook computerExample of the setting procedure for external output AV muteWhen a TV tuner or VCR is connected Connecting the projector to video equipmentConnecting to a video player, etc Viewing video imagesViewing video images Plugging in the power cordConnecting to video equipment having a DVI-D terminal Projector + DVD player or Hdtv decoderProjecting images Volume from the speaker How to change the settings Setting the aspect ratioWhen projected images are distorted to a trapezoid Gamma Mode Menu operationAvailable settings in the menus How to set the menusMenu operation Auto Power OFF Pink Black Board Lamp ModeAuto Power on On / OFF Mute Mode Black / ImageVideo Signal Password FunctionCinema Mode Auto Setup AutoSignal User menu FunctionLamp Time LOW ResolutionDescription InputTo adjust the color Color and Tint Adjusting projected imagesTo adjust the brightness Contrast and Brightness To cancel the menuAbout color temperature Adjusting projected imagesTo adjust the tone of white Color Temp Color EnhancerEN-30 To adjust the vertical position LPF Progressive filterAdvanced features Setting of the image displayed during startup or mutingTo enable the password function Advanced featuresPassword function To cancel the password functionPicture in Picture PinP ExpandStill Operation Mouse remote controlProjector + computer with USB connector PageUp buttonMajor functions Supervising and controlling by computerConnection Normal condition IndicatorsPossible Solution Abnormal conditionInterval of lamp replacement Replacing the lampReplacing the lamp Reset of the lamp operation timeWhen removing the lamp from the ceiling-mounted projector To replace the lampCleaning of the projector and the ventilation slots MaintenanceCleaning of the air-filter Cleaning of the lensTroubleshooting No image appears on the screen Problem SolutionProblem Solution TroubleshootingImages are not displayed correctly Others Problem Solution Images are not displayed correctly Problem SolutionKensington Lock Specifications Replacement part Option/Not included in the boxSpecifications XGA85Dimension Drawings unit mm ConnectorsCOMPUTER/COMPONENT Video IN-1/IN-2 DVI-D Hdcp Mitsubishi Projector Contact Information
Top Page Image Contents