Mitsubishi Electronics XD2000U To stop projecting, Instant Shut Down, Auto Position button

Page 16

Viewing computer images (continued)

POWER button

POWER STATUS

POWER button

 

 

AUTO POSITION

KEYSTONE

COMPUTER ENTER VIDEO

MENUVOLUME

ZOOM/FOCUS

LENS SHIFT

Main power switch

To stop projecting:

13.Press the POWER button.

•A confirmation message is displayed.

•To cancel the procedure, leave the projector for a while or press any button except the POWER button. 14.Press the POWER button again.

•The lamp goes out and the projector goes into a standby mode. In this standby mode, the STATUS indicator blinks green.

15.Wait about 2 minutes for the STATUS indicator to be turned off.

•During this period of 2 minutes in the standby mode, the intake fan and exhaust fan rotate to cool the lamp. 16.Turn off the main power switch.

•The POWER indicator will go out.

•Cover the lens with the lens cap to protect it from dust.

•For safety's sake, unplug the power cord from the outlet.

Instant Shut Down

You can turn off this projector just by turning off the power switch or unplugging the power cord without pressing the POWER button.

•Don’t shut down the projector while the STATUS indicator is blinking after the lamp lights up because the lamp’s life may be shortened.

•Don’t turn the projector back on right after shutting it down because the lamp's life may be shortened. (Wait about 10 minutes before turning the projector back on.)

•Before shutting down the projector, be sure to close the menu screen. If you shut down the projector without closing the menu, the setting data of the menu may not be saved.

•If you shut down the projector while controlling the projector using the network function, the application software such as ProjectorView may fail. For details, see “User Guide of LAN Control Utility” contained in the CD-ROM.

AUTO POSITION button

When the image supplied from the computer is displaced, carry out the following procedure.

1.Display a bright image (such as a full-screen display of the Recycle Bin window).

2.When the screen saver has been enabled, disable it.

3.Press the AUTO POSITION button.

The projector automatically makes optimum positional settings for the input signal.

•If the image is not projected in the correct position even after you press the AUTO POSITION button several times, change the settings in the SIGNAL menu to put the image in the correct position. (See page 27.)

•When you carry out this procedure with a dark image, the image may be displaced.

When connecting to a notebook computer:

When the projector is connected to a notebook computer, images may not be projected in some cases. In such cases, set the computer so that it can output signals externally. The setting procedure varies depending on the type of the computer. See the instruction manual of your computer.

Example of the setting procedure for external output

Press the [Fn] key and any of the keys [F1] to [F12] at the same time. (The key to be pressed depends on the type of the computer you use.)

EN-16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents XD1000 When using the projector in Europe Compliance NoticeContents Important safeguards Do not keep using the damaged projector Do not look into the lens when it is operatingPlace of installation Never remove the cabinet Do not modify this equipmentInserting the batteries into the remote control Checking accessoriesPreparing your projector Control panel OverviewTerminal board Lamp cover Adjustment feet How to disable the Laser buttonHow to enable the Laser button Preparating your projectorUsing the remote control Operational range of the remote controlUsing the wired remote control Reception angleSetting up your projector Setting up the screenBasic setup Adjusting the projection angleFront projection, ceiling mounting Rear projectionSetting up your projector When the aspect ratio of the screen isScreen size and projection distance Lens Shift buttonConnecting the projector to a computer Viewing computer imagesViewing computer images Plugging the power cordTerminal cover Projecting images Remove the lens capWhen connecting to a notebook computer Example of the setting procedure for external outputTo stop projecting Instant Shut DownConnecting to a video player, etc Connecting the projector to video equipmentViewing video images Plugging in the power cord Connecting to video equipment having a DVI-D terminalViewing video images Projector + DVD player or Hdtv decoderProjecting images Volume from the speaker AV muteSetting the aspect ratio How to change the settingsWith the remote control With the Feature menuHow to set the menus Menu operationInstallation menu Available settings in the menusImage menu Signal menu Feature menuMenu operation Adjusting projected images To adjust the brightness Contrast and BrightnessTo adjust the color Color and Tint To cancel the menuAdjusting projected images To adjust the tone of white Color TempAbout color temperature Color EnhancerTo adjust the vertical position LPFAdvanced features Password functionTo enable the password function To cancel the password functionPicture in Picture PinP ExpandStill Advanced features Mouse remote controlProjector + computer with USB connector PageUp buttonSupervising and controlling by computer ProjectorViewPJLink About PJLinkInterval of lamp replacement Replacing the lampCleaning of the projector and the ventilation slots Cleaning of the lensReset of the lamp operation time To replace the lampTroubleshooting No image appears on the screen Problem SolutionImages are not displayed correctly Problem Solution Troubleshooting Others Problem SolutionNormal condition IndicatorsAbnormal condition Replacement part Option / Not included in the box SpecificationsEN-39 Dimension Drawings unit mm ConnectorsSpecifications Mitsubishi Projector Contact Information

XD2000U specifications

The Mitsubishi Electronics XD2000U is a high-performance, versatile projector designed to meet the demands of both professional and educational environments. With its compact design and advanced features, the XD2000U is suitable for various applications including conferences, classrooms, and training sessions.

One of the standout features of the XD2000U is its brightness, delivering an impressive 2000 ANSI lumens. This ensures clear and vibrant images even in well-lit environments, making it ideal for presentations where ambient light cannot be controlled. The projector also boasts a high contrast ratio of 2000:1, providing deep blacks and bright whites that enhance image clarity and detail.

The XD2000U utilizes DLP (Digital Light Processing) technology, which contributes to its reliable performance and image quality. DLP technology is known for its sharpness, consistent color reproduction, and reduced maintenance needs compared to traditional LCD projectors. This makes the XD2000U a great choice for users who prioritize longevity and minimal upkeep.

In terms of resolution, the XD2000U supports a native XGA resolution of 1024x768 pixels, making it suitable for detailed graphics and text presentation. Additionally, the projector can accommodate various input formats, including VGA, HDMI, and component video, ensuring compatibility with a range of devices such as laptops, DVDs, and gaming consoles.

The user-friendly features of the XD2000U enhance its adaptability in various settings. The integrated speaker eliminates the need for additional audio equipment, enabling seamless presentations. Its compact size and lightweight design make it easy to transport, making it a favored option among mobile professionals and educators.

Mitsubishi has equipped the XD2000U with extensive connectivity options, including RS-232 for control systems and USB for easy file access. These features streamline the setup process, allowing users to focus on delivering impactful presentations without technical distractions.

Moreover, the XD2000U incorporates energy-saving technologies, such as an eco mode that extends lamp life significantly while reducing power consumption. This not only lowers operational costs but also minimizes environmental impact.

Overall, the Mitsubishi Electronics XD2000U exemplifies a well-rounded projector that combines brightness, clarity, and connectivity in a portable package. Whether for professional or educational purposes, it promises to deliver high-quality performance and reliability for a variety of presentation needs.
Top Page Image Contents