Mitsubishi Electronics XD2000U user manual To adjust the vertical position, Lpf

Page 27

This projector automatically and properly projects video signals supplied from the computer. However, some video signals may not be projected, depending on the type of the computer. In such a case, press the AUTO POSITION button. (See page 16.) When the signal is still not projected properly, adjust the projected image using the SIGNAL menu.

How to adjust the image supplied from the computer using the menu:

Carry out the following procedures according to the symptoms.

Wide strips appear. ……………………………………… Adjust TRACKING in the SIGNAL menu.

The projected image flickers.

The projected image is blurred. ………………………… Adjust FINE SYNC. in the SIGNAL menu.

The projected image is displaced horizontally. ……… Adjust HORIZ.POSITION in the SIGNAL menu. Every time the

￿button is pressed, the image moves to the right. Every time the ￿ button is pressed, the image moves to the left.

The projected image is displaced vertically. ………… Adjust VERT.POSITION in the SIGNAL menu. Every time the ￿

button is pressed, the image moves down. Every time the ￿ button is pressed, the image moves up.

The top part of the image flags. ……………………… Change the setting of HOLD in the SIGNAL menu. Select ON ,

press the ENTER button, and adjust BEGIN or END to minimize the flagging.

Wide strips appear. ……………………………………… Adjust CLAMP POSITION or CLAMP WIDTH in the SIGNAL -

USER menu.

The motion doesn't run smoothly.……………………… Adjust VERT. SYNC in the SIGNAL - USER menu. Select

AUTO for normal use.

Noise appears on the right or left half of the image. … Adjust SHUTTER (LS) or SHUTTER (RS) in the SIGNAL - USER

menu.

Noise appears on the top or bottom part of the image. … Adjust SHUTTER (U) or SHUTTER (L) in the SIGNAL - USER

menu.

1.Display the SIGNAL menu.

2.Press the ￿ or ￿ button to select an item to adjust.

3.Adjust the selected item by pressing the ￿ or ￿ button.

To cancel the menu:

4. Press the MENU button.

• Do not change the settings of the SIGNAL menu in normal use.

Simple method to adjust the image position

To adjust the horizontal position:

1.Align the left edge of the image with the left side of the screen by adjusting HORIZ.POSITION. Then, align the right edge of the image with the right side of the screen by adjusting TRACKING.

2.Repeat step 1 above to complete the adjustment of the horizontal position.

To adjust the vertical position:

3. Align the upper edge of the image with the upper side of the screen by adjusting VERT.POSITION.

LPF

You can select whether or not to enable the LPF. This item is set to OFF normally.

Vertical or horizontal streak noise may appear on the projected image, depending on the type of the DVD player or game console you use. In such a case, you can reduce such streak noise by enabling the LPF. However, projected images become softened slightly.

1.

Display the SIGNAL menu.

 

 

 

 

 

 

2.

Press the ￿ or ￿ button to select USER.

 

 

 

 

 

 

 

3.

Press the ENTER button.

 

 

 

 

 

LPF

OFF

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4.Press the ￿ or ￿ button to select LPF.

5.Press the ￿ or ￿ button to choose ON or OFF.

To cancel the menu:

6. Press the MENU button.

ENGLISH

EN-27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents XD1000 Compliance Notice When using the projector in EuropeContents Important safeguards Never remove the cabinet Do not modify this equipment Do not keep using the damaged projectorDo not look into the lens when it is operating Place of installationChecking accessories Inserting the batteries into the remote controlPreparing your projector Overview Control panelTerminal board Preparating your projector Lamp cover Adjustment feetHow to disable the Laser button How to enable the Laser buttonReception angle Using the remote controlOperational range of the remote control Using the wired remote controlAdjusting the projection angle Setting up your projectorSetting up the screen Basic setupRear projection Front projection, ceiling mountingLens Shift button Setting up your projectorWhen the aspect ratio of the screen is Screen size and projection distanceViewing computer images Connecting the projector to a computerPlugging the power cord Viewing computer imagesTerminal cover Remove the lens cap Projecting imagesInstant Shut Down When connecting to a notebook computerExample of the setting procedure for external output To stop projectingConnecting the projector to video equipment Connecting to a video player, etcViewing video images Projector + DVD player or Hdtv decoder Plugging in the power cordConnecting to video equipment having a DVI-D terminal Viewing video imagesProjecting images AV mute Volume from the speakerWith the Feature menu Setting the aspect ratioHow to change the settings With the remote controlMenu operation How to set the menusAvailable settings in the menus Installation menuImage menu Feature menu Signal menuMenu operation To cancel the menu Adjusting projected imagesTo adjust the brightness Contrast and Brightness To adjust the color Color and TintColor Enhancer Adjusting projected imagesTo adjust the tone of white Color Temp About color temperatureLPF To adjust the vertical positionTo cancel the password function Advanced featuresPassword function To enable the password functionExpand Picture in Picture PinPStill PageUp button Advanced featuresMouse remote control Projector + computer with USB connectorAbout PJLink Supervising and controlling by computerProjectorView PJLinkReplacing the lamp Interval of lamp replacementTo replace the lamp Cleaning of the projector and the ventilation slotsCleaning of the lens Reset of the lamp operation timeNo image appears on the screen Problem Solution TroubleshootingImages are not displayed correctly Problem Solution Others Problem Solution TroubleshootingIndicators Normal conditionAbnormal condition Specifications Replacement part Option / Not included in the boxEN-39 Connectors Dimension Drawings unit mmSpecifications Mitsubishi Projector Contact Information

XD2000U specifications

The Mitsubishi Electronics XD2000U is a high-performance, versatile projector designed to meet the demands of both professional and educational environments. With its compact design and advanced features, the XD2000U is suitable for various applications including conferences, classrooms, and training sessions.

One of the standout features of the XD2000U is its brightness, delivering an impressive 2000 ANSI lumens. This ensures clear and vibrant images even in well-lit environments, making it ideal for presentations where ambient light cannot be controlled. The projector also boasts a high contrast ratio of 2000:1, providing deep blacks and bright whites that enhance image clarity and detail.

The XD2000U utilizes DLP (Digital Light Processing) technology, which contributes to its reliable performance and image quality. DLP technology is known for its sharpness, consistent color reproduction, and reduced maintenance needs compared to traditional LCD projectors. This makes the XD2000U a great choice for users who prioritize longevity and minimal upkeep.

In terms of resolution, the XD2000U supports a native XGA resolution of 1024x768 pixels, making it suitable for detailed graphics and text presentation. Additionally, the projector can accommodate various input formats, including VGA, HDMI, and component video, ensuring compatibility with a range of devices such as laptops, DVDs, and gaming consoles.

The user-friendly features of the XD2000U enhance its adaptability in various settings. The integrated speaker eliminates the need for additional audio equipment, enabling seamless presentations. Its compact size and lightweight design make it easy to transport, making it a favored option among mobile professionals and educators.

Mitsubishi has equipped the XD2000U with extensive connectivity options, including RS-232 for control systems and USB for easy file access. These features streamline the setup process, allowing users to focus on delivering impactful presentations without technical distractions.

Moreover, the XD2000U incorporates energy-saving technologies, such as an eco mode that extends lamp life significantly while reducing power consumption. This not only lowers operational costs but also minimizes environmental impact.

Overall, the Mitsubishi Electronics XD2000U exemplifies a well-rounded projector that combines brightness, clarity, and connectivity in a portable package. Whether for professional or educational purposes, it promises to deliver high-quality performance and reliability for a variety of presentation needs.
Top Page Image Contents