Mitsubishi Electronics XD2000U Available settings in the menus, Image menu, Installation menu

Available settings in the menus

Set the following items on their relevant menus.

1. IMAGE menu 2. INSTALLATION menu 3. FEATURE menu 4. SIGNAL menu

opt.	opt.	opt.	opt.
XGA60	XGA60	XGA60	XGA60

IMAGE		INSTALLATION		FEATURE		SIGNAL
COLOR	AUTO	LAMP MODE	STANDARD	ASPECT	AUTO	HORIZ. POSITION	0
ENHANCER
CONTRAST	0	AUTO POWER	OFF	PASSWORD	DISPLAY INPUT	VERT.POSITION	0
		ON		FUNCTION

BRIGHTNESS	0	AUTO POWER	OFF	MENU POSITION	1.	FINE SYNC.	0
		OFF

COLOR TEMP.	STANDARD	ON	SPLASH	ON	CINEMA MODE	AUTO	TRACKING	0
			SCREEN

COLOR	0	BACK COLOR	BLUE	?	VIDEO SIGNAL	AUTO		COMPUTER	RGB
							R G B	INPUT
							R G B

TINT	0	IMAGE	OFF	SET UP	AUTO	HOLD	OFF
		REVERSE

SHARPNESS	0	TEST PATTERN	CROSS HATCH		SCART INPUT	OFF	USER	OK
		ZOOM/FOCUS	OFF	A Ë	LANGUAGE	English
		LOCK

		LENS SHIFT LOCK	OFF	RESET ALL	OK
		LENS SHIFT	OK
1. IMAGE menu		RESET
ITEM	SETTING	FUNCTION
COLOR ENHANCER	AUTO	Select to optimize the settings automatically depending on the input signal.
		(Select this option for normal use.)
PRESENTATION		Select to make the displayed image look bright and crisp.
	STANDARD	Select to make the displayed image look natural.
	THEATER	This option, suitable for viewing movies, makes the displayed image look soft
		and smooth.
	sRGB	Select to give priority to the color reproducibility.
		• When COLOR ENHANCER is sRGB, COLOR TEMP., COLOR and TINT can't
			be adjusted.
	USER	Select to set the gamma curve and BrilliantColorTM as desired. (See page 26.)
CONTRAST	±30	Use to adjust the contrast of the projected image. (See page 25.)
BRIGHTNESS	±30	Use to adjust the brightness of the projected image. (See page 25.)
COLOR TEMP.	4 options	Use to adjust the color temperature. (See page 26.)
COLOR	±10	Use to adjust the color thickness of the projected image. (See page 25.)
TINT	±10	Use to adjust the color tint of the projected image. (See page 25.)
	±5	• When the TV50 (PAL, SECAM) signal is input, TINT can't be adjusted.
SHARPNESS		Use to adjust the sharpness of the projected image. (See page 25.)
2. INSTALLATION menu
ITEM	SETTING	FUNCTION
LAMP MODE	STANDARD	Select this option when you want to view images in a well-lit room.
	LOW	Select to moderate the intensity of the lamp. The operating sound is reduced
		and the lamp lifetime becomes longer.

•When the lamp mode is switched, the projected image may flicker. This is not a product malfunction.

•Frequent switching of the lamp mode may damage the lamp.

AUTO POWER ON	ON / OFF	When ON is chosen, the lamp is automatically lit when the power cord is
		plugged in the wall outlet. Choose ON when using the projector mounted on
		the ceiling.

•The projector is in the stand-by mode when the lamp is off. Use the remote control to turn on the lamp.

AUTO POWER OFF	OFF / 5 - 60min	Use to set the time elapsed before the projector enters the stand-by mode
		when there is no signal input from the source.
SPLASH SCREEN	ON / OFF	Choose ON to display the splash screen when the power is turned on.
BACK COLOR	BLUE / BLACK	Use to change the color of the screen that appears when no signal is supplied.
IMAGE REVERSE	OFF	Select when viewing images from the front with the projector installed on the
		floor.
	MIRROR	Select when viewing images projected from the behind of the screen with the
		projector installed on the floor.
	INVERT	Select when viewing images projected from the behind of the screen with the
		projector installed on the ceiling.
	MIRROR INVERT	Select when viewing images from the front with the projector installed on the
		ceiling.
TEST PATTERN	CROSS HATCH	Use to show the test pattern of the crossing hatch.
ZOOM/FOCUS LOCK	ON / OFF	Use to enable or cancel the FOCUS LOCK and ZOOM LOCK.
LENS SHIFT LOCK	ON / OFF	Use to enable or cancel the LENS SHIFT LOCK.
LENS SHIFT RESET	OK	Use to reset the position of the lens to the factory setting.

•Regardless of the setting of LAMP MODE in the INSTALLATION menu, the STANDARD lamp mode is activated by default whenever the projector is turned on. When LAMP MODE has been set to LOW, the lamp mode changes from STANDARD to LOW about 1 minute after turn-on.

•To cancel the test pattern, press any button.

ENGLISH

EN-23