Mitsubishi Electronics XD2000U user manual Troubleshooting, Others Problem Solution

Page 36

Troubleshooting (continued)

Others

Problem

Solution

 

 

The exhaust vents

• This air comes out after cooling the inside of the projector. You may feel hot, but this is

emit warm air.

not a malfunction.

No audio is output.

• Check that the volume isn't set to low.

 

 

The menu can't be

• The microcomputers inside the projector may be wrongly operating because of noise.

used.

￿ Turn off the main power, wait about 10 minutes, and turn on the main power again.

 

 

“TEMPERATURE!!” is

• This indication appears when the ambient temperature rises high. When the ambient

displayed.

temperature stays high, the lamp goes out.

 

￿ Eliminate any causes of the rise in the ambient temperature.

 

• This indication appears when the air inlet or outlet grille is blocked. When they are kept

 

blocked, the lamp goes out.

 

￿ Remove the objects blocking the air inlet or outlet grille.

The mark appears.

• This mark appears when ineffective operation is carried out. This isn't a product

 

malfunction.

The remote control

• Check that the batteries are loaded in the remote control or the batteries are not weak.

doesn't function easily

(See page 6.)

• Check that the remote control sensor isn't exposed to direct sunlight or fluorescent

or at all.

light. (See page 9.)

 

 

• Use the remote control within its operation range. (See page 9.)

 

• Use the remote control at least 10 cm away from the projector.

 

 

The buttons on the

• PASSWORD FUNCTION in the FEATURE menu has been set to MENU ACCESS to en-

control panel (except

able the password lock.

for the POWER

￿ Cancel the password lock or contact the person in charge of management of the

button) don’t function.

projector. (See page 28.)

 

 

Abnormal sound is

• Because the color wheel spins at a high speed, metallic sounds may be heard in rare

heard.

occasions. Such symptom is not a malfunction.

 

 

If the following problem occurs after the lamp is replaced, check the following first.

Problem

Solution

 

 

The projector does not

• Fit the lamp cover securely. (See pages 32 and 33.)

turn on.

•

Reset the lamp operating time. (See page 33.)

The STATUS indicator

•

Reset the lamp operating time. (See page 33.)

blinks.

 

 

 

 

 

Kensington Lock

This projector has a Kensington Security Standard connector for use with Kensington MicroSaver Security System. Refer to the information that came with the Kensington System for instructions on how to use it to secure the projector. Please contact Kensington Technology Group below.

Kensington Technology Group 2855 Campus Drive

San Mateo, CA 94403, U.S.A.

Phone : +1- (650)572-2700 Fax : +1- (650)572-9675

EN-36

Page 35 Page 37
Image 36
Page 35 Page 37
Contents XD1000 When using the projector in Europe Compliance NoticeContents Important safeguards Do not keep using the damaged projector Do not look into the lens when it is operatingPlace of installation Never remove the cabinet Do not modify this equipmentChecking accessories Inserting the batteries into the remote controlPreparing your projector Overview Control panelTerminal board Lamp cover Adjustment feet How to disable the Laser buttonHow to enable the Laser button Preparating your projectorUsing the remote control Operational range of the remote controlUsing the wired remote control Reception angleSetting up your projector Setting up the screenBasic setup Adjusting the projection angleFront projection, ceiling mounting Rear projectionSetting up your projector When the aspect ratio of the screen isScreen size and projection distance Lens Shift buttonConnecting the projector to a computer Viewing computer imagesPlugging the power cord Viewing computer imagesTerminal cover Projecting images Remove the lens capWhen connecting to a notebook computer Example of the setting procedure for external outputTo stop projecting Instant Shut DownConnecting the projector to video equipment Connecting to a video player, etcViewing video images Plugging in the power cord Connecting to video equipment having a DVI-D terminalViewing video images Projector + DVD player or Hdtv decoderProjecting images Volume from the speaker AV muteSetting the aspect ratio How to change the settingsWith the remote control With the Feature menuHow to set the menus Menu operationAvailable settings in the menus Installation menuImage menu Feature menu Signal menuMenu operation Adjusting projected images To adjust the brightness Contrast and BrightnessTo adjust the color Color and Tint To cancel the menuAdjusting projected images To adjust the tone of white Color TempAbout color temperature Color EnhancerTo adjust the vertical position LPFAdvanced features Password functionTo enable the password function To cancel the password functionExpand Picture in Picture PinPStill Advanced features Mouse remote controlProjector + computer with USB connector PageUp buttonSupervising and controlling by computer ProjectorViewPJLink About PJLinkInterval of lamp replacement Replacing the lampCleaning of the projector and the ventilation slots Cleaning of the lensReset of the lamp operation time To replace the lampTroubleshooting No image appears on the screen Problem SolutionImages are not displayed correctly Problem Solution Troubleshooting Others Problem SolutionIndicators Normal conditionAbnormal condition Replacement part Option / Not included in the box SpecificationsEN-39 Connectors Dimension Drawings unit mmSpecifications Mitsubishi Projector Contact Information

XD2000U specifications

The Mitsubishi Electronics XD2000U is a high-performance, versatile projector designed to meet the demands of both professional and educational environments. With its compact design and advanced features, the XD2000U is suitable for various applications including conferences, classrooms, and training sessions.

One of the standout features of the XD2000U is its brightness, delivering an impressive 2000 ANSI lumens. This ensures clear and vibrant images even in well-lit environments, making it ideal for presentations where ambient light cannot be controlled. The projector also boasts a high contrast ratio of 2000:1, providing deep blacks and bright whites that enhance image clarity and detail.

The XD2000U utilizes DLP (Digital Light Processing) technology, which contributes to its reliable performance and image quality. DLP technology is known for its sharpness, consistent color reproduction, and reduced maintenance needs compared to traditional LCD projectors. This makes the XD2000U a great choice for users who prioritize longevity and minimal upkeep.

In terms of resolution, the XD2000U supports a native XGA resolution of 1024x768 pixels, making it suitable for detailed graphics and text presentation. Additionally, the projector can accommodate various input formats, including VGA, HDMI, and component video, ensuring compatibility with a range of devices such as laptops, DVDs, and gaming consoles.

The user-friendly features of the XD2000U enhance its adaptability in various settings. The integrated speaker eliminates the need for additional audio equipment, enabling seamless presentations. Its compact size and lightweight design make it easy to transport, making it a favored option among mobile professionals and educators.

Mitsubishi has equipped the XD2000U with extensive connectivity options, including RS-232 for control systems and USB for easy file access. These features streamline the setup process, allowing users to focus on delivering impactful presentations without technical distractions.

Moreover, the XD2000U incorporates energy-saving technologies, such as an eco mode that extends lamp life significantly while reducing power consumption. This not only lowers operational costs but also minimizes environmental impact.

Overall, the Mitsubishi Electronics XD2000U exemplifies a well-rounded projector that combines brightness, clarity, and connectivity in a portable package. Whether for professional or educational purposes, it promises to deliver high-quality performance and reliability for a variety of presentation needs.
Top Page Image Contents