Mitsubishi Electronics XD2000U Adjusting projected images, To adjust the tone of white Color Temp

Page 26

Adjusting projected images (continued)

To adjust the tone of white (COLOR TEMP.):

You can select a preset color temperature (white tone) using the menu. (See page 22 for menu setting.)

1.Display the IMAGE menu.

2.Select COLOR TEMP. by pressing the ￿ or ￿ button.

3.Select your desired color temperature by pressing the ￿ or ￿ button.

To cancel the menu:

4. Press the MENU button.

To adjust the tone of white (To customize the color temperature):

To customize (and store) the color temperature to your preference, carry out the following procedure. (See page 22 for menu setting.)

1.Select COLOR TEMP. in the IMAGE menu.

2.Press the ￿ or ￿ button to select USER .

3.Press the ENTER button.

4.Press the ￿ or ￿ button to select the desired item.

5.Press the ￿ or ￿ button to adjust the selected item.

6.Repeat steps 4 and 5 for optimum adjustment results.

To cancel the menu:

7. Press the MENU button.

To enable the stored color temperature:

1. Set COLOR TEMP. to USER in the IMAGE menu.

COLOR TEMP.-USER

CONTRAST R

0

 

 

CONTRAST G

0

 

 

CONTRAST B

0

 

 

BRIGHTNESS R

0

 

 

BRIGHTNESS G

0

 

 

BRIGHTNESS B

0

 

 

About color temperature

There are different kinds of white color. Color temperature is a way to show the differences in white. White of which temperature is low appears reddish. When the color temperature rises, white appears bluish. For example, you can change the color temperature using the following procedures.

To raise the color temperature: Increase the CONTRAST B (blue) and decrease the CONTRAST R (red).

To reduce the color temperature: Decrease the CONTRAST B (blue) and increase the CONTRAST R (red).

If you set all of CONTRAST R, G, and B to negative values, the original brightness of the image can't be obtained even when you maximize CONTRAST in the IMAGE menu.

Color Enhancer

You can set the user-defined balance between the brightness and hue using the menu. (See page 22 for menu setting.)

With the IMAGE menu:

 

 

 

1.

Display the IMAGE menu.

 

 

 

2.

Select COLOR ENHANCER by pressing the ￿ or ￿ button.

 

 

 

COLOR

 

AUTO

3.

Select USER

 

by pressing the ￿ or ￿ button.

ENHANCER

 

 

 

 

 

 

4.

Press the ENTER button.

 

 

 

COLOR ENHANCER-USER

 

5.

Select an item you want to set.

 

 

 

GAMMA MODE

 

DYNAMIC

GAMMA mode

 

 

BrilliantColorTM

 

10

Use this item to set the gamma optimally.

 

 

 

 

 

 

DYNAMIC ……Select when viewing images supplied from the computer.

 

 

 

NATURAL ……Select when viewing images supplied from the video device.

 

 

 

DETAIL ………Select when viewing images of which brightness should be kept relatively low, such as movies and

music performance.

BrilliantColorTM

Use this item to make the colors having medium brightness such as yellow and skin tone look natural. Press the ￿ button to decrease the value to lessen the effect. Press the ￿ button to increase the value to heighten the effect. (BrilliantColor™ doesn’t work at value 0.)

6. Select a setting value by pressing the ￿ or ￿ button.

You can adjust Color Enhancer also by pressing the CE button on the remote control.

For more enhanced color reproduction, set BrilliantColorTM to 0. The white portion of the color wheel will be disa- bled and you can reproduce true-to-life images.

With the remote control:

1.Press the CE button on the remote control.

A window for color enhancer adjustment appears on the upper right of the screen.

2.Press the ￿ or ￿ button to select USER .

3.Press the ENTER button.

4.Press the ￿ or ￿ button to select GAMMA MODE or BrilliantColor™.

5.Press the ￿ or ￿ button to adjust the selected item.

EN-26

Image 26
Contents XD1000 When using the projector in Europe Compliance NoticeContents Important safeguards Place of installation Do not keep using the damaged projectorDo not look into the lens when it is operating Never remove the cabinet Do not modify this equipmentPreparing your projector Checking accessoriesInserting the batteries into the remote control Terminal board OverviewControl panel How to enable the Laser button Lamp cover Adjustment feetHow to disable the Laser button Preparating your projectorUsing the wired remote control Using the remote controlOperational range of the remote control Reception angleBasic setup Setting up your projectorSetting up the screen Adjusting the projection angleFront projection, ceiling mounting Rear projectionScreen size and projection distance Setting up your projectorWhen the aspect ratio of the screen is Lens Shift buttonConnecting the projector to a computer Viewing computer imagesTerminal cover Plugging the power cordViewing computer images Projecting images Remove the lens capTo stop projecting When connecting to a notebook computerExample of the setting procedure for external output Instant Shut DownViewing video images Connecting the projector to video equipmentConnecting to a video player, etc Viewing video images Plugging in the power cordConnecting to video equipment having a DVI-D terminal Projector + DVD player or Hdtv decoderProjecting images Volume from the speaker AV muteWith the remote control Setting the aspect ratioHow to change the settings With the Feature menuHow to set the menus Menu operationImage menu Available settings in the menusInstallation menu Menu operation Feature menuSignal menu To adjust the color Color and Tint Adjusting projected imagesTo adjust the brightness Contrast and Brightness To cancel the menuAbout color temperature Adjusting projected imagesTo adjust the tone of white Color Temp Color EnhancerTo adjust the vertical position LPFTo enable the password function Advanced featuresPassword function To cancel the password functionStill ExpandPicture in Picture PinP Projector + computer with USB connector Advanced featuresMouse remote control PageUp buttonPJLink Supervising and controlling by computerProjectorView About PJLinkInterval of lamp replacement Replacing the lampReset of the lamp operation time Cleaning of the projector and the ventilation slotsCleaning of the lens To replace the lampTroubleshooting No image appears on the screen Problem SolutionImages are not displayed correctly Problem Solution Troubleshooting Others Problem SolutionAbnormal condition IndicatorsNormal condition Replacement part Option / Not included in the box SpecificationsEN-39 Specifications ConnectorsDimension Drawings unit mm Mitsubishi Projector Contact Information

XD2000U specifications

The Mitsubishi Electronics XD2000U is a high-performance, versatile projector designed to meet the demands of both professional and educational environments. With its compact design and advanced features, the XD2000U is suitable for various applications including conferences, classrooms, and training sessions.

One of the standout features of the XD2000U is its brightness, delivering an impressive 2000 ANSI lumens. This ensures clear and vibrant images even in well-lit environments, making it ideal for presentations where ambient light cannot be controlled. The projector also boasts a high contrast ratio of 2000:1, providing deep blacks and bright whites that enhance image clarity and detail.

The XD2000U utilizes DLP (Digital Light Processing) technology, which contributes to its reliable performance and image quality. DLP technology is known for its sharpness, consistent color reproduction, and reduced maintenance needs compared to traditional LCD projectors. This makes the XD2000U a great choice for users who prioritize longevity and minimal upkeep.

In terms of resolution, the XD2000U supports a native XGA resolution of 1024x768 pixels, making it suitable for detailed graphics and text presentation. Additionally, the projector can accommodate various input formats, including VGA, HDMI, and component video, ensuring compatibility with a range of devices such as laptops, DVDs, and gaming consoles.

The user-friendly features of the XD2000U enhance its adaptability in various settings. The integrated speaker eliminates the need for additional audio equipment, enabling seamless presentations. Its compact size and lightweight design make it easy to transport, making it a favored option among mobile professionals and educators.

Mitsubishi has equipped the XD2000U with extensive connectivity options, including RS-232 for control systems and USB for easy file access. These features streamline the setup process, allowing users to focus on delivering impactful presentations without technical distractions.

Moreover, the XD2000U incorporates energy-saving technologies, such as an eco mode that extends lamp life significantly while reducing power consumption. This not only lowers operational costs but also minimizes environmental impact.

Overall, the Mitsubishi Electronics XD2000U exemplifies a well-rounded projector that combines brightness, clarity, and connectivity in a portable package. Whether for professional or educational purposes, it promises to deliver high-quality performance and reliability for a variety of presentation needs.