Mitsubishi Electronics XD50U Connections with Component Signals, Green Blue Red Cb Cr, Pb Pr

Connecting Personal Computers and Video Equipment

Connections with Component Signals

When the Video Equipment Has a YCbCr Connector or YPbPr Connector

•The projector has been set to “Auto” at the factory; however, if it does not project, please change the input setting to “Compo- nent” using the menu sequence of [Setup] → [Input Format] → [PC].

See “Input Format” on Page E-47.

•This projector automatically distinguishes the YCbCr input signal and the YPbPr input signal and projects it.

When projecting the YCbCr signal or YPbPr signal, if the color of the overall image strongly leans toward being greenish or another color, change the setting under the menu of [Color] → [Color Space].

See “Color Space” on Page E-43.

Component cable (Not supplied)

DVI/mini D-Sub 15-pin conversion cable (Not supplied)

Green

Blue

Red

Y Cb Cr

COMPONENT

PC-CARD

COMPONENT

Y Pb Pr

DVI/mini D-Sub 15-pin conversion cable (Not supplied)

Green

Blue

Red

Component cable (Not supplied)

E-19