Mitsubishi Electronics XD50U user manual Interval, Repeat, Progress Bar

Page 53

Setup

Interval

This is the setting of the slide automatic switching play time for the viewer screen.

See “Using the PC Card Viewer” on Page E-59 for information about how to use the viewer.

Select item name “PC Card Viewer,” then press the ENTER button to open the sub menu.

Select “Play Interval” and set the slide display time with the SELECT ￿￿ buttons. The setting can be made in 1-second units from 1 to 180 seconds.

Note

*The play interval indicates the time during which the slide is displayed. The dis- play processing time for slide switching is not included.

*Only readable slides will be played automatically.

Repeat

This setting determines whether or not viewer screen slides are played repeatedly at time of automatic switching play.

See “Using the PC Card Viewer” on Page E-59 for information about how to use the viewer.

Select item name “PC Card Viewer,” then press the ENTER button to open the sub menu.

Select “Repeat” and select the setting contents with the SELECT ￿￿ buttons.

Off

Stops at the last slide.

On

Repeatedly plays the slides in the folder.

Progress Bar

This setting determines whether or not the progress bar is displayed at the time of a viewer screen reduced image or full screen display.

See “Using the PC Card Viewer” on Page E-59 for information about how to use the viewer.

Select item name “PC Card Viewer,” then press the ENTER button to open the sub menu.

Select “Progress Bar” and select the setting contents with the SELECT ￿￿ buttons.

Off

Does not display the progress bar.

On

Displays the progress bar.

Progress Bar During Thumbnail Display

Note:

Images of high resolution will take time in image conversion processing for re- duced images or full screen display. An indication of the time until the end of con- version processing can be seen via the bar display. Please use this as a guideline for wait time.

0 0 0 0 0 0 0 B _ J P G

1 / 2

Progress Bar During Switching to Full Screen Display

E-52

Page 52 Page 54
Image 53
Page 52 Page 54
Contents XD50 Important Safety Information Important Safety Information Never remove the cabinet Place of installationDo not modify this equipment If you break or drop the cabinetMajor Features Table of Contents Table of Contents Checking the Supplied Accessories Carrying case for projector and accessories Checking the Supplied AccessoriesNames of the Main Unit Parts Names of the Main Unit Parts Built-in Security SlotVOL button E-30 Volume adjustment display Names of the Remote Control PartsInfrared transmitter E-12 Standby button E-21Button Battery Replacement Preparing the Remote ControlRemote Control Range Using the remote control for the first timeProcedure Up to Projecting to the Screen Screen Size and Projection Distance Placement GuideDVI-D cable Not supplied Personal Computers with a DVI ConnectorConnections with Personal Computer Connecting Personal Computers and Video Equipment Personal Computers with a Mini D-Sub 15-Pin ConnectorPersonal computer DVI/mini D-Sub 15-pin conversion cable Supplied itemManufacturer Model Key To Output the External Output Signal of a Notebook ComputerVideo Equipment with Video Connectors Connections with Composite SignalsVideo Equipment with S-VIDEO Connectors → Video See Input Format on Page E-47Green Blue Red Cb Cr Connections with Component SignalsPb Pr Green Blue RedAudio cable Supplied item Connections with the Audio JackAudio conversion cable Supplied itemOperating Switch on the projector powerLit amber Firmly plug in all the way To wall outletPress the Enter button to set Power Cable Connections and Switching the Power On/OffThis completes the selection of the display language CursorStandby indicator changes to flash Unplug the power cableStandby mode FinishingAdjustment of the Projection Screen Adjustment of the Projection ScreenAdjust the projection image to the screen Zoom ringFocus ring Making Adjustments with the AdjustersRaising the projection image Lowering the projection imageWhen Auto Source is On Automatic AdjustmentWhen Auto Source is Off General OperationGeneral Operation Video Signals / Component SignalsSelection of Aspect Ratio Freezing a Moving Picture Cancelling Video and Audio TemporarilyLamp Mode Using the Presentation Timer Adjust the volume Adjustment of the VolumeTo close the display immediately, press the Cancel button KeystoneImage can also be moved in the following circumstances Enlargement of the Image and Video MovementPress the Zoom button Enlarge to the desired sizeContent of Adjustments and Settings Using the Quick MenuExample Brightness adjustment display VolumeMain unit buttons Menu Operation MethodMenu Screen Names and Functions Adjustment Bar Item NameMenu Operation Method Menu NameMenu Display Press the Menu button to display the menu Performing Menu OperationsThis condition al- lows selection of the item name Making Adjustments/SettingsSelecting Another Menu Name with Remote Control Operation Imput ColorView Info Menu name Item Name Sub Menu SetupPicture Picture Adj. Picture AdjustmentBrightness / Contrast / Color / Tint / Sharpness Picture Adj. / Fine Picture / H Position / V PositionPress of the Enter button forces the reset ResetFine Picture PositionGamma ColorColor Temp WhiteSelection contents at the time of YPbPr input Selection contents at the time of YCbCr inputColor Space White BalanceView Video SignalsAspect FilterVertical Flip Power cable has been unpluggedKeystone Save ViewAuto Power Off SetupAuto Source Menu PositionVideo and SVideo SetupInput Format To start the timer Presentation TimerLogo Background Logo ScalingInvalidata Logo Capture ModeLogo Position Preview Start Logo CapturePlay Mode Initial SettingSwitches the slide manually FolderRepeat IntervalProgress Bar Progress Bar During Thumbnail DisplayLanguage Example of a display when Aspect button is pressedOn Screen BackgroundDisplays the logo Startup ScreenLamp Timer Reset Factory DefaultInfo StatusInfo Resolution / FrequencyLamp Timer Preparation and Projection of the Image Logo Capture SettingsStartup Logo Creation Start Capture → Page E-50 Startup Logo CreationTerminology Used in the Viewer Using the PC Card ViewerBefore Using the PC Card Viewer Slide Creation Method Using the PC Card Viewer Slide Creation Guide Store the images on a CompactFlash CardSource button Names and Functions of the Viewer FunctionsPC-CARD button Slide  Using the Tool Bar Names and Functions of the Viewer Screen Parts Insertion to the PC Card Slot of the Personal Computer Using CompactFlash Cards Insertion to the PC Card Slot  Removal from the PC Card SlotWhen PC Card Error is displayed Switch the Input to the PC CardPC Card Viewer Operation Set to PC-CARDSelection Method When a folder has been selected and opened,When the Select button has been pressed When the File Open Error is Displayed Thumbnail Display and Settings ChangesView the Slides Rotation of the SlidesThermal Protector When an Indicator is Lit or FlashingCheck the following matters before requesting servicing TroubleshootingCleaning a Soiled Projector Main Unit CleaningCleaning the Inside of the Projector Dirty LensReplacing the Lamp Cartridge Remove the lamp cartridge Replacing the Lamp CartridgeMount the lamp cover Reset the Lamp TimerMount the new lamp cartridge Optical SpecificationsElectrical MechanicalTable of Supported Frequency SignalResolution Frequency Video Digital Analog 239 190 Unit mm inch Cabinet DimensionsMitsubishi Electric Corporation

XD50U specifications

The Mitsubishi Electronics XD50U is a compact and versatile LCD projector designed to deliver high-quality images and excellent performance for a variety of applications. Ideal for both business presentations and educational purposes, the XD50U offers a blend of advanced features, reliability, and ease of use, making it a popular choice among professionals and educators alike.

One of the standout features of the XC50U is its bright 5000 ANSI lumens output, ensuring clear and vivid images even in well-lit environments. Coupled with a native XGA resolution of 1024 x 768 pixels, this projector provides sharp and detailed visuals, making it suitable for intricate presentations, graphs, and videos.

The projector boasts a high contrast ratio of 2000:1, which enhances color depth and detail. This feature is particularly beneficial when presenting images or videos that require clear visual differentiation. The XD50U also supports a range of input formats, including HDMI, VGA, and composite video, ensuring compatibility with a wide array of devices such as laptops, DVD players, and gaming consoles.

Another significant attribute of the Mitsubishi XD50U is its user-friendly design. Weighing just under 6 pounds, this projector is lightweight and portable, allowing for easy transportation between rooms or venues. The intuitive control panel and remote control simplify operation, making it accessible for users with varying levels of technical expertise.

In terms of longevity and maintenance, the XD50U is equipped with a long-lasting lamp that can achieve up to 3000 hours of runtime in standard mode and extend to 4000 hours in eco mode. This extended lifespan reduces the frequency of lamp replacements, providing a cost-effective solution for users.

For additional convenience, the XD50U includes features such as automatic vertical keystone correction, which ensures that images are presented without distortion, and a quick start function that minimizes setup time. The built-in speaker also enhances presentations by providing audio without the need for external sound equipment.

Overall, the Mitsubishi Electronics XD50U is a powerful, feature-rich projector that caters to diverse presentation needs, offering reliable performance, vibrant image quality, and practical usability. Whether used in classrooms or conference rooms, the XD50U remains a solid choice for anyone in need of a dependable presentation solution.
Top Page Image Contents