Mitsubishi Electronics user manual Specifications, Optical, Electrical, Mechanical, ModelXD50U

Page 74

Specifications

ModelXD50U

Optical

Method of projection :

DLP™ (single chip DMD)

DMD

0.7 inches 1024768 dots

Lamp

150 W high pressure mercury lamp

Projection lens :

See below

Image size

See below

Light Output

1500 ANSI lumens

Contrast Ratio

1500:1 (Full on/off)

Electrical

Inputs

Video (NTSC3.58/NTSC4.43/PAL/PAL-N/PAL-M/PAL60/SECAM)

 

RGB (Horizontal :15 to 80 kHz, Vertical 50 to 85 Hz)

Color Reproduction

Full color (16,770,000 colors)

Resolution

VGA (640480) expansion/true, S-VGA (800600) expansion/true

 

XGA (1024768) true, S-XGA (12801024) compression

Input Current

2.0 A

Power Requirement

100 - 240 V AC, 50/60 Hz

Power Consumption

200 watts

Mechanical

Dimensions Excluding Stand

190 mm (W)53 mm (H)239 mm (D)

 

7.5 in.(W)2.1 in.(H)9.4 in.(D)

Weight

Approximately 1.5 kg / 3.3 lbs

Operational Temperatures

Data projector: 5° to 35°C (41° to 95°F), 30 to 85% humidity

Projection lens

Manual zoom (1.2)

 

Manual focus

 

F = 2.6 – 2.9, f = 27.5 – 33.0 mm

Image size

Minimum 26 inch

 

(at projection distance of 1.2 m telephoto)

 

Maximum 200 inch

 

(at projection distance of 7.86 m wide)

 

 

 

Projection lens

Manual zoom (1.2)

 

Manual focus

 

F = 2.6 – 2.9, f = 1.1 – 1.3 inch

Image size

Minimum 26 inch

 

(at projection distance of 3.9 feet telephoto)

 

Maximum 200 inch

 

(at projection distance of 25.8 feet wide)

 

 

• Specifications and design are subject to change without notice.

E-73

Image 74
Contents XD50 Important Safety Information Important Safety Information Do not modify this equipment Place of installationNever remove the cabinet If you break or drop the cabinetMajor Features Table of Contents Table of Contents Checking the Supplied Accessories Checking the Supplied Accessories Carrying case for projector and accessoriesNames of the Main Unit Parts Built-in Security Slot Names of the Main Unit PartsInfrared transmitter E-12 Names of the Remote Control PartsVOL button E-30 Volume adjustment display Standby button E-21Remote Control Range Preparing the Remote ControlButton Battery Replacement Using the remote control for the first timeProcedure Up to Projecting to the Screen Placement Guide Screen Size and Projection DistanceDVI-D cable Not supplied Personal Computers with a DVI ConnectorConnections with Personal Computer Personal computer Personal Computers with a Mini D-Sub 15-Pin ConnectorConnecting Personal Computers and Video Equipment DVI/mini D-Sub 15-pin conversion cable Supplied itemTo Output the External Output Signal of a Notebook Computer Manufacturer Model KeyVideo Equipment with S-VIDEO Connectors Connections with Composite SignalsVideo Equipment with Video Connectors → Video See Input Format on Page E-47Pb Pr Connections with Component SignalsGreen Blue Red Cb Cr Green Blue RedAudio conversion cable Connections with the Audio JackAudio cable Supplied item Supplied itemLit amber Switch on the projector powerOperating Firmly plug in all the way To wall outletThis completes the selection of the display language Power Cable Connections and Switching the Power On/OffPress the Enter button to set CursorStandby mode Unplug the power cableStandby indicator changes to flash FinishingAdjust the projection image to the screen Adjustment of the Projection ScreenAdjustment of the Projection Screen Zoom ringRaising the projection image Making Adjustments with the AdjustersFocus ring Lowering the projection imageWhen Auto Source is Off Automatic AdjustmentWhen Auto Source is On General OperationGeneral Operation Video Signals / Component SignalsSelection of Aspect Ratio Freezing a Moving Picture Cancelling Video and Audio TemporarilyLamp Mode Using the Presentation Timer To close the display immediately, press the Cancel button Adjustment of the VolumeAdjust the volume KeystonePress the Zoom button Enlargement of the Image and Video MovementImage can also be moved in the following circumstances Enlarge to the desired sizeExample Brightness adjustment display Using the Quick MenuContent of Adjustments and Settings VolumeMenu Operation Method Main unit buttonsMenu Operation Method Adjustment Bar Item NameMenu Screen Names and Functions Menu NamePerforming Menu Operations Menu Display Press the Menu button to display the menuMaking Adjustments/Settings This condition al- lows selection of the item nameSelecting Another Menu Name with Remote Control Operation Imput ColorView Menu name Item Name Sub Menu Setup InfoBrightness / Contrast / Color / Tint / Sharpness Picture Adj. Picture AdjustmentPicture Picture Adj. / Fine Picture / H Position / V PositionFine Picture ResetPress of the Enter button forces the reset PositionColor Temp ColorGamma WhiteColor Space Selection contents at the time of YCbCr inputSelection contents at the time of YPbPr input White BalanceAspect Video SignalsView FilterKeystone Save Power cable has been unpluggedVertical Flip ViewAuto Source SetupAuto Power Off Menu PositionVideo and SVideo SetupInput Format Logo Background Presentation TimerTo start the timer Logo ScalingInvalidata Logo Capture ModeLogo Position Start Logo Capture PreviewSwitches the slide manually Initial SettingPlay Mode FolderProgress Bar IntervalRepeat Progress Bar During Thumbnail DisplayOn Screen Example of a display when Aspect button is pressedLanguage BackgroundStartup Screen Displays the logoInfo Factory DefaultLamp Timer Reset StatusInfo Resolution / FrequencyLamp Timer Preparation and Projection of the Image Logo Capture SettingsStartup Logo Creation Startup Logo Creation Start Capture → Page E-50Terminology Used in the Viewer Using the PC Card ViewerBefore Using the PC Card Viewer  Slide Creation Guide Using the PC Card ViewerSlide Creation Method Store the images on a CompactFlash CardSource button Names and Functions of the Viewer FunctionsPC-CARD button Slide  Using the Tool Bar Names and Functions of the Viewer Screen Parts  Insertion to the PC Card Slot Using CompactFlash CardsInsertion to the PC Card Slot of the Personal Computer  Removal from the PC Card SlotPC Card Viewer Operation Switch the Input to the PC CardWhen PC Card Error is displayed Set to PC-CARDSelection Method When a folder has been selected and opened,When the Select button has been pressed View the Slides Thumbnail Display and Settings ChangesWhen the File Open Error is Displayed Rotation of the SlidesWhen an Indicator is Lit or Flashing Thermal ProtectorTroubleshooting Check the following matters before requesting servicingCleaning the Inside of the Projector CleaningCleaning a Soiled Projector Main Unit Dirty LensReplacing the Lamp Cartridge Replacing the Lamp Cartridge Remove the lamp cartridgeMount the lamp cover Reset the Lamp TimerMount the new lamp cartridge Electrical SpecificationsOptical MechanicalTable of Supported Frequency SignalResolution Frequency Video Digital Analog Cabinet Dimensions 239 190 Unit mm inchMitsubishi Electric Corporation

XD50U specifications

The Mitsubishi Electronics XD50U is a compact and versatile LCD projector designed to deliver high-quality images and excellent performance for a variety of applications. Ideal for both business presentations and educational purposes, the XD50U offers a blend of advanced features, reliability, and ease of use, making it a popular choice among professionals and educators alike.

One of the standout features of the XC50U is its bright 5000 ANSI lumens output, ensuring clear and vivid images even in well-lit environments. Coupled with a native XGA resolution of 1024 x 768 pixels, this projector provides sharp and detailed visuals, making it suitable for intricate presentations, graphs, and videos.

The projector boasts a high contrast ratio of 2000:1, which enhances color depth and detail. This feature is particularly beneficial when presenting images or videos that require clear visual differentiation. The XD50U also supports a range of input formats, including HDMI, VGA, and composite video, ensuring compatibility with a wide array of devices such as laptops, DVD players, and gaming consoles.

Another significant attribute of the Mitsubishi XD50U is its user-friendly design. Weighing just under 6 pounds, this projector is lightweight and portable, allowing for easy transportation between rooms or venues. The intuitive control panel and remote control simplify operation, making it accessible for users with varying levels of technical expertise.

In terms of longevity and maintenance, the XD50U is equipped with a long-lasting lamp that can achieve up to 3000 hours of runtime in standard mode and extend to 4000 hours in eco mode. This extended lifespan reduces the frequency of lamp replacements, providing a cost-effective solution for users.

For additional convenience, the XD50U includes features such as automatic vertical keystone correction, which ensures that images are presented without distortion, and a quick start function that minimizes setup time. The built-in speaker also enhances presentations by providing audio without the need for external sound equipment.

Overall, the Mitsubishi Electronics XD50U is a powerful, feature-rich projector that caters to diverse presentation needs, offering reliable performance, vibrant image quality, and practical usability. Whether used in classrooms or conference rooms, the XD50U remains a solid choice for anyone in need of a dependable presentation solution.