Mitsubishi Electronics XD50U Using the Quick Menu, Content of Adjustments and Settings, Volume

Page 33

General Operation

Using the Quick Menu

(1)

This function permits frequently used adjustments to be performed quickly.

Note that the Quick Menu will not be displayed unless the signal of the connected equipment is input. Please select the input that you wish to adjust.

SOURCEAUTO

Main unit operation

(1)Press the QUICK MENU button to display the quick ad- justment display.

Further presses cause the adjustment display to change in

sequence.

Press the SELECT ￿ or ￿ button to switch to the desired adjustment display.

(2)Press the SELECT ￿ or ￿ button to adjust.

Remote control operation

(1)A press of the QUICK MENU button brings up the quick adjustment display.

Further presses cause the adjustment display to change in sequence.

The adjustment display can be selected with use of either the SELECT ￿ or ￿ button.

(2)Press the cursor ￿ or ￿ button to make the adjustment. Pressing the “+” or “–” button will also switch the adjustment display.

(3)To close the display immediately, press the CANCEL but- ton.

In the absence of operations for a period of about 10 sec- onds, the display will close automatically.

(2)

MENU

QUICK

 

MENU

(3)

QUICK ASPECT AUTO

(1)

MENU

CANCEL

(2)

ENTER

TIMER

KSTN

ZOOM

VOL

(2)

Content of Adjustments and Settings

Example: Brightness adjustment display

Brightness0

Display Item

Adjustment/Setting

 

 

Brightness

Adjusts the brightness of the image. See page E-40.

 

 

Contrast

Adjusts the contrast of the image. See page E-40.

 

 

Keystone

Corrects (vertical) keystone distortion of the screen. See page E-30.

 

 

Volume

This function adjusts the volume of the built-in speaker. See page E-30.

 

 

Presentation timer

Sets the time of the presentation timer. See page E-29.

 

 

E-32

Image 33
Contents XD50 Important Safety Information Important Safety Information Never remove the cabinet Place of installationDo not modify this equipment If you break or drop the cabinetMajor Features Table of Contents Table of Contents Checking the Supplied Accessories Carrying case for projector and accessories Checking the Supplied AccessoriesNames of the Main Unit Parts Names of the Main Unit Parts Built-in Security SlotVOL button E-30 Volume adjustment display Names of the Remote Control PartsInfrared transmitter E-12 Standby button E-21Button Battery Replacement Preparing the Remote ControlRemote Control Range Using the remote control for the first timeProcedure Up to Projecting to the Screen Screen Size and Projection Distance Placement GuidePersonal Computers with a DVI Connector Connections with Personal ComputerDVI-D cable Not supplied Connecting Personal Computers and Video Equipment Personal Computers with a Mini D-Sub 15-Pin ConnectorPersonal computer DVI/mini D-Sub 15-pin conversion cable Supplied itemManufacturer Model Key To Output the External Output Signal of a Notebook ComputerVideo Equipment with Video Connectors Connections with Composite SignalsVideo Equipment with S-VIDEO Connectors → Video See Input Format on Page E-47Green Blue Red Cb Cr Connections with Component SignalsPb Pr Green Blue RedAudio cable Supplied item Connections with the Audio JackAudio conversion cable Supplied itemOperating Switch on the projector powerLit amber Firmly plug in all the way To wall outletPress the Enter button to set Power Cable Connections and Switching the Power On/OffThis completes the selection of the display language CursorStandby indicator changes to flash Unplug the power cableStandby mode FinishingAdjustment of the Projection Screen Adjustment of the Projection ScreenAdjust the projection image to the screen Zoom ringFocus ring Making Adjustments with the AdjustersRaising the projection image Lowering the projection imageWhen Auto Source is On Automatic AdjustmentWhen Auto Source is Off General OperationVideo Signals / Component Signals Selection of Aspect RatioGeneral Operation Cancelling Video and Audio Temporarily Lamp ModeFreezing a Moving Picture Using the Presentation Timer Adjust the volume Adjustment of the VolumeTo close the display immediately, press the Cancel button KeystoneImage can also be moved in the following circumstances Enlargement of the Image and Video MovementPress the Zoom button Enlarge to the desired sizeContent of Adjustments and Settings Using the Quick MenuExample Brightness adjustment display VolumeMain unit buttons Menu Operation MethodMenu Screen Names and Functions Adjustment Bar Item NameMenu Operation Method Menu NameMenu Display Press the Menu button to display the menu Performing Menu OperationsThis condition al- lows selection of the item name Making Adjustments/SettingsSelecting Another Menu Name with Remote Control Operation Color ViewImput Info Menu name Item Name Sub Menu SetupPicture Picture Adj. Picture AdjustmentBrightness / Contrast / Color / Tint / Sharpness Picture Adj. / Fine Picture / H Position / V PositionPress of the Enter button forces the reset ResetFine Picture PositionGamma ColorColor Temp WhiteSelection contents at the time of YPbPr input Selection contents at the time of YCbCr inputColor Space White BalanceView Video SignalsAspect FilterVertical Flip Power cable has been unpluggedKeystone Save ViewAuto Power Off SetupAuto Source Menu PositionSetup Input FormatVideo and SVideo To start the timer Presentation TimerLogo Background Logo ScalingCapture Mode Logo PositionInvalidata Logo Preview Start Logo CapturePlay Mode Initial SettingSwitches the slide manually FolderRepeat IntervalProgress Bar Progress Bar During Thumbnail DisplayLanguage Example of a display when Aspect button is pressedOn Screen BackgroundDisplays the logo Startup ScreenLamp Timer Reset Factory DefaultInfo StatusResolution / Frequency Lamp TimerInfo Logo Capture Settings Startup Logo CreationPreparation and Projection of the Image Start Capture → Page E-50 Startup Logo CreationUsing the PC Card Viewer Before Using the PC Card ViewerTerminology Used in the Viewer Slide Creation Method Using the PC Card Viewer Slide Creation Guide Store the images on a CompactFlash CardNames and Functions of the Viewer Functions PC-CARD buttonSource button  Using the Tool Bar  Names and Functions of the Viewer Screen PartsSlide Insertion to the PC Card Slot of the Personal Computer Using CompactFlash Cards Insertion to the PC Card Slot  Removal from the PC Card SlotWhen PC Card Error is displayed Switch the Input to the PC CardPC Card Viewer Operation Set to PC-CARDWhen a folder has been selected and opened, When the Select button has been pressedSelection Method When the File Open Error is Displayed Thumbnail Display and Settings ChangesView the Slides Rotation of the SlidesThermal Protector When an Indicator is Lit or FlashingCheck the following matters before requesting servicing TroubleshootingCleaning a Soiled Projector Main Unit CleaningCleaning the Inside of the Projector Dirty LensReplacing the Lamp Cartridge Remove the lamp cartridge Replacing the Lamp CartridgeReset the Lamp Timer Mount the new lamp cartridgeMount the lamp cover Optical SpecificationsElectrical MechanicalSignal Resolution Frequency Video Digital AnalogTable of Supported Frequency 239 190 Unit mm inch Cabinet DimensionsMitsubishi Electric Corporation

XD50U specifications

The Mitsubishi Electronics XD50U is a compact and versatile LCD projector designed to deliver high-quality images and excellent performance for a variety of applications. Ideal for both business presentations and educational purposes, the XD50U offers a blend of advanced features, reliability, and ease of use, making it a popular choice among professionals and educators alike.

One of the standout features of the XC50U is its bright 5000 ANSI lumens output, ensuring clear and vivid images even in well-lit environments. Coupled with a native XGA resolution of 1024 x 768 pixels, this projector provides sharp and detailed visuals, making it suitable for intricate presentations, graphs, and videos.

The projector boasts a high contrast ratio of 2000:1, which enhances color depth and detail. This feature is particularly beneficial when presenting images or videos that require clear visual differentiation. The XD50U also supports a range of input formats, including HDMI, VGA, and composite video, ensuring compatibility with a wide array of devices such as laptops, DVD players, and gaming consoles.

Another significant attribute of the Mitsubishi XD50U is its user-friendly design. Weighing just under 6 pounds, this projector is lightweight and portable, allowing for easy transportation between rooms or venues. The intuitive control panel and remote control simplify operation, making it accessible for users with varying levels of technical expertise.

In terms of longevity and maintenance, the XD50U is equipped with a long-lasting lamp that can achieve up to 3000 hours of runtime in standard mode and extend to 4000 hours in eco mode. This extended lifespan reduces the frequency of lamp replacements, providing a cost-effective solution for users.

For additional convenience, the XD50U includes features such as automatic vertical keystone correction, which ensures that images are presented without distortion, and a quick start function that minimizes setup time. The built-in speaker also enhances presentations by providing audio without the need for external sound equipment.

Overall, the Mitsubishi Electronics XD50U is a powerful, feature-rich projector that caters to diverse presentation needs, offering reliable performance, vibrant image quality, and practical usability. Whether used in classrooms or conference rooms, the XD50U remains a solid choice for anyone in need of a dependable presentation solution.