Mitsubishi Electronics XD470U/XD470U-G user manual Preparation for projection

Page 12

Preparation

Preparation for projection

1.Attach the provided power cord to the projector.

2.Plug the power cord in the wall outlet.

3.Remove the lens cap.

Warning:

•Do not look into the lens directly when the projector is on.

•The lens cap is for protecting the lens. If you leave the lens cap on the lens with the projector turned on, it may be deformed because of heat build-up. Remove the lens cap when you turn on the pro- jector.

•One of power cords for the U.S., Europe and U.K. is provided appropriately.

•This projector uses the power plug of three-pin grounding type. Do not remove the grounding pin from the power plug. If the power plug doesn’t fit your wall outlet, ask an electrician to change the wall outlet.

•In case that the power cord for the U.S is provided with this projec- tor, never connect this cord to any outlet or power supply using other voltages or frequencies than rated. If you want to use a power supply using other voltage than rated, prepare an appropri- ate power cord separately.

•Use 100-240 V AC 50/60 Hz to prevent fire or electric shock.

•Do not place any objects on the power cord or do not place the projector near heat sources to prevent damage to the power cord. If the power cord should be damaged, contact your dealer for replacement because it may cause fire or electric shock.

•Do not modify or alter the power cord. If the power cord is modified or altered, it may cause fire or electric shock.

Caution:

•Plug in the power cord firmly. When unplugging, hold and pull the power plug, not the power cord.

•Do not plug in or out the power cord with your hand wet. It may cause electric shock.

Adjustment of the projection angle

For the best projection, project images on a flat screen installed at 90 degrees to the floor. If necessary, tilt the projector using the two adjustment feet on the bottom of the projector.

Using the adjustment feet (front)

1.Tilt up the projector to the appropriate angle.

2.Press the foot adjustment button (front).

3.Release the foot adjustment button (front) after fine adjusting a position of lengthwise direction of the image.

foot adjustment butoon

After using the projector:

4.Put the adjustment feet (front) back into the projector by press- ing the foot adjustment buttons.

Using the adjustment feet (rear)

1.Tilt up the projector to the appropriate angle.

2.Press the foot adjustment buttons next to the adjustment feet (rear), and the adjustment feet will come out.

3.Release the buttons to lock the adjustment feet (rear) to that position.

4.Rotate the adjustment feet (rear) for fine adjustment.

After using the projector:

5.Put the adjustment feet (rear) back into the projector by pressing the foot adjustment buttons.

Important:

•If necessary, rotate the adjustment feet (front) for fine adjustment.

•Install the screen on a flat wall at 90 degrees to the floor.

•Slanting the projector more than ±10° (right and left) or ±15° (front and rear) may cause trouble or explosion of the lamp. You can tilt the projector up to 7 degrees using the adjustment feet only.

•Images may not be projected in a shape of a regular rectangle or with its aspect ratio 4:3, depending on the installation conditions of the projector and the screen.

•To correct vertical keystone distortion, press the KEYSTONE but-

ton on the projector or the remote control to display KEYSTONE, and adjust the image by pressing the S, T button (or VOLUME +,

- button on the remote control).

In the following cases:

Press the T

Press the S

(or -) button.

(or +) button.

Important:

•When the keystone adjustment is carried out, the adjustment value is indicated. Note that this value doesn’t mean a projection angle.

•The allowable range of the adjustment value in the keystone adjustment varies depending on the installation conditions.

•When the keystone adjustment takes effect, the resolution decreases. In addition, stripes may appear or straight lines may bend in images with complicated patterns. They are not due to product malfunctions.

•Noise may appear on the screen during the keystone adjustment because of the type of the video signal being projected and the setting values of the keystone adjustment. In such cases, set the keystone adjustment values in the range where the image is dis- played without noise.

•When the keystone adjustment is carried out, the image may not be displayed correctly because of the type of input signal.

EN-12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents XD470U/XD470U-G When using the projector in Europe ShockContents Important safeguards Do not keep using the damaged projector Do not look into the lens when the projector is operat- ingDo not unplug the power cord during operation Place of installationOverview Control panelTerminal board Remote control Bottom sideRemote control Battery installationOperation range of the remote control Reception angle vertical Reception angle horizontalInstallation Layout of the projectorFront projection Front projection, ceiling mountingBasic connections Projector + AV deviceProjector + DVD player or Hdtv decoder Projector + Computer For computer with Mini D-SUBFor analog connection For monitor connectionAdjustment of the projection angle Using the adjustment feet frontUsing the adjustment feet rear PreparationPower-on Basic operationPower-off Volume from the speakerAnamorphic mode Instant Shut DownMenu operation Basic operationMenu operation Feature Signal User No need to adjust in normal useImage adjustment Image adjustmentColor temperature Adjustment of the image from the computer Simple adjustment methodAdvanced feature StillTo resume the motion in the image Page-up and page-downPassword function To cancel the password functionTo enable the password function Lamp replacement Interval of lamp replacementTroubleshooting Images aren’t projected on the screenTroubleshooting Images aren’t projected correctlyMaintenance Cleaning of the projector and the ventilation slotsCleaning of the lens OthersIndicators Normal conditionAbnormal condition Specifications Connectors Dimensional drawings unit mmReplacement part What’s included in the boxSignal mode Resolution Horizontal Vertical Mitsubishi Electric Corporation

XD470U/XD470U-G specifications

The Mitsubishi Electronics XD470U/XD470U-G are advanced digital projectors designed for business and educational environments, providing high-quality images and a range of features that enhance presentations and learning experiences. Notable for their versatility, these projectors can accommodate various applications, making them an ideal choice for conference rooms, classrooms, and auditoriums.

At the heart of the XD470U/XD470U-G is a powerful imaging system that delivers stunningly bright and vivid visuals. With a brightness rating of 4500 ANSI lumens, these projectors ensure clarity even in well-lit rooms. They feature a native resolution of XGA (1024 x 768), which is compatible with a wide range of content types, from text to intricate graphics, ensuring that every detail is clearly visible.

One of the standout technologies in the XD470U/XD470U-G is its advanced Color Management technology which produces exceptional color accuracy. This technology helps in achieving vibrant colors that maintain their integrity across various viewing conditions. Coupled with a contrast ratio of 2000:1, the projectors offer deep blacks and bright whites, enhancing the overall quality of the visual experience.

The XD470U/XD470U-G projectors are equipped with a variety of input options, including HDMI, VGA, and USB, making connectivity seamless and adaptable to different devices. Additionally, the inclusion of RS-232 control allows for easy integration with existing AV systems, providing flexibility for users who require advanced management options.

Portability is another key feature, with a compact design and lightweight build enabling easy transportation between locations. This makes the XD470U/XD470U-G ideal for mobile professionals who often conduct presentations in different venues.

The projectors also boast an extended lamp life of up to 6000 hours in eco mode, significantly reducing maintenance and replacement costs. Furthermore, they come with eco-friendly features that contribute to lower energy consumption, aligning with sustainability goals while delivering robust performance.

In conclusion, the Mitsubishi Electronics XD470U/XD470U-G projectors are built to meet the demands of modern business and education settings. With their impressive brightness, advanced color technology, versatile connectivity options, and focus on energy efficiency, they remain a valuable asset for effective presentations and engaging learning environments.
Top Page Image Contents