Mitsubishi Electronics XD470U/XD470U-G user manual Basic operation, Power-on

Page 13

Basic operation

4

 

 

FOCUS

 

 

6

3

1, 2

ZOOM

ENGLISH

5

5

3, 1, 2

5

Power-on

1.Turn on the device connected to the projector first.

2.Plug the power cord in the wall outlet.

•The POWER indicator lights up.

•If the power cord is unplugged from the wall outlet before the projector is cooled down completely after use, the fans may start rotating when the power cord is plugged in next time and the POWER button may not function. In this case, wait for the fans to stop and press the POWER button to light the indicator.

3.Press the POWER button on the control panel or the ON button on the remote control.

•It may take about one minute for the lamp to light up.

•The lamp occasionally fails to light up. Wait a few minutes and try to light the lamp again.

•After the POWER button is pressed, the image may flicker before the lamp becomes stable. This is not a product mal- function.

•Regardless of the setting of LAMP MODE in the INSTALLA- TION menu, the STANDARD lamp mode is activated by default whenever the projector is turned on. When LAMP MODE has been set to LOW, the lamp mode changes from STANDARD to LOW about one minute after turn-on.

 

Indicator

STATUS

POWER

Condition

 

 

 

 

 

 

 

 

Stand-by

 

-

Red

 

 

 

 

When the lamp is on.

 

Green

Green

 

 

 

 

Important:

•Do not cover the lens with the lens cap while the lamp is on. Do not strip off the aluminum sheet inside the lens cap.

•The projector starts warming up when the POWER button is pressed. During the warm-up process, images may appear dark and no commands are accepted.

•By blinking red, the STATUS indicator indicates that the lamp should be replaced soon. Replace the lamp when the STATUS indicator blinks red. (See page 23 and 26.)

•Images may not be projected with good quality in an extremely hot or cold environment. (This is not a product malfunction.)

4.Adjust the focus by turning the focus ring.

5.Choose your desired external input source using the COM- PUTER or VIDEO button.

•The input source is switched from VIDEO to COMPUTER at the press of the COMPUTER button on the control panel.

•The input source is switched between VIDEO and S-VIDEO at every press of the VIDEO button on the control panel.

•The projector automatically selects the appropriate signal format. The selected signal format is displayed on the screen.

•The COMPUTER and VIDEO buttons don’t function while the menu is being displayed.

•When COMPUTER is chosen as the source, images sup- plied from the computer may flicker. Press the W or X button

on the remote control to reduce flicker, if it occurs.

•To avoid permanently imprinting a fixed image onto your pro- jector, please do not display the same stationary images for long period.

6.Adjust the image size by turning the zoom ring.

•If necessary, adjust the focus and zoom again.

EN-13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents XD470U/XD470U-G Shock When using the projector in EuropeContents Important safeguards Do not look into the lens when the projector is operat- ing Do not keep using the damaged projectorDo not unplug the power cord during operation Place of installationControl panel OverviewTerminal board Bottom side Remote controlBattery installation Remote controlOperation range of the remote control Reception angle vertical Reception angle horizontalLayout of the projector InstallationFront projection Front projection, ceiling mountingProjector + AV device Basic connectionsProjector + DVD player or Hdtv decoder For computer with Mini D-SUB Projector + ComputerFor analog connection For monitor connectionUsing the adjustment feet front Adjustment of the projection angleUsing the adjustment feet rear PreparationBasic operation Power-onVolume from the speaker Power-offAnamorphic mode Instant Shut DownBasic operation Menu operationMenu operation Signal User No need to adjust in normal use FeatureImage adjustment Image adjustmentColor temperature Simple adjustment method Adjustment of the image from the computerStill Advanced featureTo resume the motion in the image Page-up and page-downTo cancel the password function Password functionTo enable the password function Interval of lamp replacement Lamp replacementImages aren’t projected on the screen TroubleshootingImages aren’t projected correctly TroubleshootingCleaning of the projector and the ventilation slots MaintenanceCleaning of the lens OthersNormal condition IndicatorsAbnormal condition Specifications Dimensional drawings unit mm ConnectorsReplacement part What’s included in the boxSignal mode Resolution Horizontal Vertical Mitsubishi Electric Corporation

XD470U/XD470U-G specifications

The Mitsubishi Electronics XD470U/XD470U-G are advanced digital projectors designed for business and educational environments, providing high-quality images and a range of features that enhance presentations and learning experiences. Notable for their versatility, these projectors can accommodate various applications, making them an ideal choice for conference rooms, classrooms, and auditoriums.

At the heart of the XD470U/XD470U-G is a powerful imaging system that delivers stunningly bright and vivid visuals. With a brightness rating of 4500 ANSI lumens, these projectors ensure clarity even in well-lit rooms. They feature a native resolution of XGA (1024 x 768), which is compatible with a wide range of content types, from text to intricate graphics, ensuring that every detail is clearly visible.

One of the standout technologies in the XD470U/XD470U-G is its advanced Color Management technology which produces exceptional color accuracy. This technology helps in achieving vibrant colors that maintain their integrity across various viewing conditions. Coupled with a contrast ratio of 2000:1, the projectors offer deep blacks and bright whites, enhancing the overall quality of the visual experience.

The XD470U/XD470U-G projectors are equipped with a variety of input options, including HDMI, VGA, and USB, making connectivity seamless and adaptable to different devices. Additionally, the inclusion of RS-232 control allows for easy integration with existing AV systems, providing flexibility for users who require advanced management options.

Portability is another key feature, with a compact design and lightweight build enabling easy transportation between locations. This makes the XD470U/XD470U-G ideal for mobile professionals who often conduct presentations in different venues.

The projectors also boast an extended lamp life of up to 6000 hours in eco mode, significantly reducing maintenance and replacement costs. Furthermore, they come with eco-friendly features that contribute to lower energy consumption, aligning with sustainability goals while delivering robust performance.

In conclusion, the Mitsubishi Electronics XD470U/XD470U-G projectors are built to meet the demands of modern business and education settings. With their impressive brightness, advanced color technology, versatile connectivity options, and focus on energy efficiency, they remain a valuable asset for effective presentations and engaging learning environments.
Top Page Image Contents