Basic connections

This projector can be connected to equipment such as VCRs, video cameras, videodisc players, and personal com- puters having analog RGB output.

Important:

•Make sure that your equipment is turned off before connection.

•Plug in firmly and unplug by holding the plug, not by pulling the main power cable.

•If connected units are set too close to one another, the image may be affected.

•Refer to the owner's guide of each component for details of connections.

Projector + AV equipment

Important:

•Match the color of video and audio plugs on the AV cable with the connections.

•S-video signals take priority over video signals. If you input both S-video signals and normal video signals at the same time, the normal video input automatically is inhibited.

to audio input 1

to S-video

input 2

to video input 1

to audio input 2

to	S-	video			Connect either one of these.
input		2
		to vid	eo	input 2

Connect either one of these.

to audio	to S-video to video		to audio to S-video	to video
output	output	output	output output	output
DVD player, others			VCR, others

Projector + DVD player or HDTV decoder

Some DVD players have output terminal for 3 line fitting (Y, CB, CR). When connecting them to the projector, connect to COMPUTER 1 IN or COMPUTER 2 IN of the projector. In this case, set “ Y, CB, CR” for COMPUTER INPUT setting in SIGNAL menu.

Connecting with DVD player

DVD player generally has SDTV system compo- DVD player or HDTV decoder nent video output (Y, CB, CR) terminal. When con-

necting the projector with DVD player, the COM- PUTER INPUT in the SIGNAL setting menu be- comes [Y, CB, CR] automatically.

BNC - RCA connector (optional)

Connecting with HDTV decoder

Many HDTV decoders have HDTV system compo- nent video output (Y, PB, PR) terminal. When con- necting the projector with this type of HDTV de- coder, the COMPUTER INPUT in the SIGNAL setting menu becomes [Y, PB, PR] automatically.

YCB(PB) CR(PR) No connection

HD/CS

to COMPUTER

1 IN

•Y, PB, PR is an example of the terminal names for a HDTV decoder.

•The terminal name is different depending on the connected equipment.

•Use mini D-SUB 15 pin-BNC conversion cable for connection.

•Some DVD players may not project the image correctly.

•When connecting with HDTV equipment which has R, G, B output, set RGB for the COMPUTER INPUT in the SIGNAL setting menu.

EN – 10