Maintenance, Cleaning the lens | Mitsubishi Electronics LVP-X300U

Filter cover

Maintenance

Caution:	Caution:
Be sure to turn off the projector and unplug the power	Be sure to use the projector with an air-filter. If not,
cord from the wall outlet before you perform any main-	dust may get inside the projector, causing a fire or a
tenance on the projector.	breakdown.

ENGLISH

Cleaning the air-filter

This projector has two air-filters, for bottom air-outlet slots and for front air outlet slots. Clean the air-filter frequently. If the filter or ventilation slots become clogged with dirt or dust, the temperature inside the projector may rise and shut off the power (the TEMP indicator starts to blink red).

Filter cover

(For front air outlet slots)

Filter cover (For bottom air outlet slots)

For bottom air outlet slots

1. To remove the filter cover, press the ridged area gently, push the cover in the direction of the arrow and lift.

2. Remove the air-filter from the filter cover.

Cleaning the projector and the ventilation slots

Use a soft cloth to clean the projector and the ventila- tion slots. When the slots become dirty, wipe them with a soft cloth dampened with a diluted mild detergent, and then wipe them with a dry cloth.

To protect the surface of the projector from fading or deteriorating:

•Do not spray insecticide on or inside the projector.

•Do not use benzine or thinner to clean it.

•Do not let rubber or plastic materials come into contact with the projector.

Cleaning the lens

Use a standard lens-cleaning brush or a piece of lens tissue dampened with lens cleaning fluid. The lens sur- face is fragile. Use only recommended, nonabrasive lens-cleaning materials. Do not touch the lens with your fingers.

3. Wash the air-filter.

•Use water or a mild

detergent diluted with water to clean the filter.

Filter

Rinse the filter thoroughly and let it dry completely.

4.Attach the filter to the cover.

5.Reinstall the filter cover.

For front air outlet slots

1. To remove the filter cover, press the two ridged area gently and pull the cover.

2.Remove the dust from the air-filter by using a vacuum cleaner.

• Do not wash the air-

	filter.	Air-filter
	filter.	Filter cover
		Filter cover

3. Reinstall the filter cover.

Important:

•If the filter is damaged or becomes extremely dirty, contact your dealer for replacement.

•The power will not turn on if the air-filter cover is improperly installed.

EN – 23