Onkyo HT-R390 Supplied Accessories, Make sure you have the following accessories

Page 4
Batteries (AA/R6)

For British models

Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service personnel.

IMPORTANT

The wires in the mains lead are coloured in accordance with the following code:

Blue: Neutral Brown: Live

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.

The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.

IMPORTANT

The plug is fitted with an appropriate fuse. If the fuse needs to be replaced, the replacement fuse must approved by ASTA or BSI to BS1362 and have the same ampere rating as that indicated on the plug. Check for the ASTA mark or the BSI mark on the body of the fuse.

If the power cord’s plug is not suitable for your socket outlets, cut it off and fit a suitable plug. Fit a suitable fuse in the plug.

For European Models

Declaration of Conformity

We, ONKYO EUROPE ELECTRONICS GmbH

LIEGNITZERSTRASSE 6, 82194 GROEBENZELL, GERMANY

declare in own responsibility, that the ONKYO product described in this instruction manual is in compliance with the corresponding technical standards such as EN60065, EN55013, EN55020 and EN61000-3-2, -3-3.

GROEBENZELL, GERMANY

K. MIYAGI

ONKYO EUROPE ELECTRONICS GmbH

Supplied Accessories

Make sure you have the following accessories:

Indoor FM antenna (page 16)

AM loop antenna (page 16)

Power cord (Brazilian models) (page 16)

Remote controller (RC-762M) and two batteries (AA/R6) (page 4)

*In catalogs and on packaging, the letter at the end of the product name indicates the color. Specifications and operations are the same regardless of color.

Installing the batteries

Note

• If the remote controller doesn’t work reliably, try replacing the batteries.

Don’t mix new and old batteries or different

types of batteries.

If you intend not to use

the remote controller for a long time, remove the batteries to prevent damage from leakage or corrosion.

Remove expired batteries as soon as possible to prevent damage from leakage or corrosion.

Aiming the remote controller

To use the remote controller, point it at the AV receiver’s remote control sensor, as shown below.

Remote control sensor

AV receiver

Approx. 16 ft. (5 m)

En

4

Image 4
Contents HT-R390 HT-R290 Local regulations when disposing of batteries Temperature protection operates if the apparatusAttain an abnormal high temperature 10 cm 4 at the rear. The rear edge of the shelf orPrecautions Supplied Accessories Make sure you have the following accessoriesInstalling the batteries Aiming the remote controllerContents Features AmplifierProcessing MiscellaneousListening Mode buttons Memory button Tuning Mode button Display buttonFront & Rear Panels Front PanelRemote Control jack DisplayRear Panel Front A, CENTER, SURR, SUBWOOFER, Front BRemote Controller Display button TUN Mode button CH +/- buttonControlling the AV Receiver SP A/B buttonConnecting the AV Receiver Connecting Your SpeakersConnecting the Speaker Cables Using a Passive SubwooferSpeaker Configuration Speaker Connection PrecautionsNumber of channels Front speakers Center speaker Surround speakersAbout AV Connections Connected image with AV componentsAV Cables and Jacks Hdmi cableConnecting Components with Hdmi Audio return channel ARC functionJack Components TipConnecting Your Components How to record the videoSee Recording to make a connection for video recording Jack Components AssignableConnecting Onkyo uComponents Connecting a Recording ComponentSystem On/Auto Power On Remote ControlConnecting Antenna Connecting the Power CordSee Auto Standby about a power management setting Turning On/Off the AV ReceiverTurning On Turning OffUsing the Tuner Tuning into Radio StationsPlayback Listening to AM/FM RadioUsing RDS excluding North American and Brazilian models Presetting AM/FM StationsMode Displaying Radio Text RT Finding Stations by Type PTYEnter Listening to Traffic News TPUsing Basic Functions Using the Listening ModesSelecting Listening Modes About Listening ModesOnkyo-Original DSP Listening Modes Speaker LayoutListening Modes Listening modes cannot be selected with some source formats Using the Home Menu Selecting Speakers a and B Using the Sleep TimerSetting the Display Brightness Using the Music OptimizerDisplaying Source Information Changing the Input DisplayUsing Headphones Muting the AV ReceiverRecording AV RecordingAdvanced Setup On-screen Setup MenusCommon Procedures in Setup Menu BD/DVDHdmi Input Component Component Video InputDigital Audio Digital Audio Input Explanatory NotesSp Config Speaker Configuration Sp Distance Speaker Distance Level Cal Level Calibration UnitLeft, Center*1, Right, Surround Right, Surround Subwoofer*1Audio Adjust Multiplex/Mono SettingsDolby Settings DTS SettingSource Setup Dynamic VolumeAudyssey Dynamic EQSetting the Incoming Digital Signal Fixed Mode SyncName Audio SelectorHdmi Setup Remote ControlHardware TunerHdmi Through Audio TV OutAudio Return Ch ARC LipSyncUsing the Audio Settings Tone ControlSpeaker Levels Late Night FunctionMusic Optimizer CinemaFILTERMusic Optimizer Cinema FilterIPod/iPhone Playback via Onkyo Dock Using the Onkyo DockUP-A1 Dock Controlling Your iPod/iPhone RI DockWith the RI Control Without the RI ControlAvailable buttons Preprogrammed Remote Control Codes Entering Remote Control CodesRemote Control Codes for Onkyo Components Connected via u Controlling Other Onkyo ComponentsResetting Remote Mode Buttons Resetting the Remote ControllerControlling Other Components Controlling a Blu-ray Disc/DVD Player, HD DVD PlayerCassettetape deck Components Buttons DVDplayerDisc + Power TroubleshootingAudio Video Tuner Remote ControllerUP-A1 Dock for iPod/iPhone Recording OthersVideo Connection Formats Connection Tips and Video Signal PathAudio Connection Formats Supported Audio Formats About HdmiAbout Copyright Protection About p-compatible components Using an RIHD-compatible TV, Player, or RecorderOperations that can be performed with Connection How to connect and setup Confirm the connecting and settingConfirm the settings Operate with the remote controllerSpecifications Amplifier Section GeneralVideo Section Tuner SectionMemo Memo Memo Onkyo Europe Electronics GmbH Onkyo Europe Electronics GmbH UK Branch

HT-R390 specifications

The Onkyo HT-R390 is a versatile and powerful home theater receiver designed to bring an exceptional audio experience to your living space. Known for its combination of affordability and performance, the HT-R390 seamlessly integrates into any home entertainment setup, providing a wide range of features and technologies that enhance both sound quality and usability.

One of the standout features of the Onkyo HT-R390 is its robust power output, delivering up to 100 watts per channel across a 5.1-channel configuration. This ensures that users can experience rich, dynamic sound whether they are watching movies, listening to music, or playing video games. The receiver also supports various surround sound formats, including Dolby TrueHD and DTS-HD Master Audio, allowing for an immersive audio experience that complements high-definition video.

Connectivity options are abundant with the HT-R390. The receiver is equipped with multiple HDMI inputs, making it easy to connect various sources such as Blu-ray players, gaming consoles, and streaming devices. It also features audio return channel (ARC) support, which simplifies the connection between your television and the receiver, allowing for streamlined audio playback from your TV's built-in apps. Additionally, the receiver includes a variety of inputs, such as optical and coaxial digital inputs, as well as analog audio inputs, providing versatility for connecting legacy devices.

Another notable feature is the Onkyo HT-R390's compatibility with user-friendly technologies. It offers built-in Bluetooth connectivity, making it easy to stream music directly from smartphones or tablets without the need for cords. The receiver's high-current amplification also ensures that even lower-impedance speakers can be driven effectively, providing a clean and powerful performance across a wide range of speaker selections.

The receiver also comes with a user-friendly setup process, aided by the included setup microphone that helps calibrate the sound to suit the specific acoustics of your room. This feature optimizes audio performance, ensuring a balanced soundstage and accurate reproduction of movie soundtracks or musical performances.

In conclusion, the Onkyo HT-R390 stands out in the competitive market of home theater receivers due to its combination of powerful audio performance, versatile connectivity options, and user-friendly features. For anyone looking to upgrade their home entertainment system, the HT-R390 provides an excellent balance of affordability and high-quality sound reproduction.