Onkyo HT-R390 Setting the Display Brightness, Displaying Source Information, Vcr/Dvr

Page 25

Setting the Display Brightness

You can adjust the brightness of the AV receiver’s display.

1 Press RECEIVER followed by DIMMER repeatedly to select: dim, dimmer, or normal brightness.

Tip

•Alternatively, you can use the AV receiver’s DIMMER

(North American and Brazilian models).

Displaying Source Information

You can display various information about the current input source as follows. (Components connected to the UNIVERSAL PORT jack are excluded.)

1 Press RECEIVER followed by DISPLAY repeatedly to cycle through the available information.

The following information can typically be displayed.

Input source & volume*1

Listening mode

Tip

• Alternatively, you can use the AV receiver’s DISPLAY.

*1 When AM or FM radio is used, the band, preset number, and frequency are displayed.

*If the input signal is analog, “Analog” is displayed. If the input signal is PCM, the sampling frequency is displayed. If the input signal is digital but not PCM, the signal format is displayed.

Information is displayed for about three seconds, then the previously displayed information reappears.

Changing the Input Display

When you connect an u-capable Onkyo component, you must configure the input display so that ucan work properly.

This setting can be done only from the front panel.

1 Press TV/CD, GAME or VCR/DVR.

“TV/CD”, “GAME” or “VCR/DVR” appears on the display.

2 Press and hold down the same button (about

3 seconds) to change the input display.

Repeat this step to select the desired input display. ■ TV/CD:

TV/CD → DOCK

→

 

 

TAPE

 

 

→

■ GAME:

 

GAME ↔ DOCK

■VCR/DVR:

VCR/DVR ↔ DOCK

Note

•DOCK cannot be selected for multiple input selectors at the same time.

•Enter the appropriate remote control code before using the remote controller for the first time (➔ page 41).

Using the Music Optimizer

The Music Optimizer function enhances the sound quality of compressed music files.

1 Press MUSIC OPTIMIZER on the front panel.

The M.Opt indicator lights on the display.

Tip

•Alternatively, you can use the remote controller’s AUDIO and arrow buttons.

•See “Music Optimizer” for more details (➔ page 37).

En

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents HT-R390 HT-R290 Temperature protection operates if the apparatus Local regulations when disposing of batteriesAttain an abnormal high temperature 10 cm 4 at the rear. The rear edge of the shelf orPrecautions Make sure you have the following accessories Supplied AccessoriesInstalling the batteries Aiming the remote controllerContents Amplifier FeaturesProcessing MiscellaneousMemory button Tuning Mode button Display button Listening Mode buttonsFront & Rear Panels Front PanelDisplay Remote Control jackRear Panel Front A, CENTER, SURR, SUBWOOFER, Front BDisplay button TUN Mode button CH +/- button Remote ControllerControlling the AV Receiver SP A/B buttonConnecting Your Speakers Connecting the AV ReceiverConnecting the Speaker Cables Using a Passive SubwooferSpeaker Connection Precautions Speaker ConfigurationNumber of channels Front speakers Center speaker Surround speakersConnected image with AV components About AV ConnectionsAV Cables and Jacks Hdmi cableAudio return channel ARC function Connecting Components with HdmiJack Components TipHow to record the video Connecting Your ComponentsSee Recording to make a connection for video recording Jack Components AssignableConnecting a Recording Component Connecting Onkyo uComponentsSystem On/Auto Power On Remote ControlConnecting the Power Cord Connecting AntennaTurning On/Off the AV Receiver See Auto Standby about a power management settingTurning On Turning OffTuning into Radio Stations Using the TunerPlayback Listening to AM/FM RadioUsing RDS excluding North American and Brazilian models Presetting AM/FM StationsMode Finding Stations by Type PTY Displaying Radio Text RTEnter Listening to Traffic News TPUsing the Listening Modes Using Basic FunctionsSelecting Listening Modes About Listening ModesOnkyo-Original DSP Listening Modes Speaker LayoutListening Modes Listening modes cannot be selected with some source formats Using the Sleep Timer Using the Home Menu Selecting Speakers a and BUsing the Music Optimizer Setting the Display BrightnessDisplaying Source Information Changing the Input DisplayMuting the AV Receiver Using HeadphonesRecording AV RecordingOn-screen Setup Menus Advanced SetupCommon Procedures in Setup Menu BD/DVDComponent Component Video Input Hdmi InputDigital Audio Digital Audio Input Explanatory NotesSp Config Speaker Configuration Unit Sp Distance Speaker Distance Level Cal Level CalibrationLeft, Center*1, Right, Surround Right, Surround Subwoofer*1Multiplex/Mono Settings Audio AdjustDolby Settings DTS SettingDynamic Volume Source SetupAudyssey Dynamic EQSync Setting the Incoming Digital Signal Fixed ModeName Audio SelectorRemote Control Hdmi SetupHardware TunerAudio TV Out Hdmi ThroughAudio Return Ch ARC LipSyncTone Control Using the Audio SettingsSpeaker Levels Late Night FunctionCinemaFILTER Music OptimizerMusic Optimizer Cinema FilterIPod/iPhone Playback via Onkyo Dock Using the Onkyo DockUP-A1 Dock RI Dock Controlling Your iPod/iPhoneWith the RI Control Without the RI ControlAvailable buttons Entering Remote Control Codes Preprogrammed Remote Control CodesRemote Control Codes for Onkyo Components Connected via u Controlling Other Onkyo ComponentsResetting the Remote Controller Resetting Remote Mode ButtonsControlling Other Components Controlling a Blu-ray Disc/DVD Player, HD DVD PlayerCassettetape deck Components Buttons DVDplayerDisc + Power TroubleshootingAudio Video Tuner Remote ControllerUP-A1 Dock for iPod/iPhone Others RecordingVideo Connection Formats Connection Tips and Video Signal PathAudio Connection Formats Supported Audio Formats About HdmiAbout Copyright Protection About p-compatible components Using an RIHD-compatible TV, Player, or RecorderOperations that can be performed with Connection Confirm the connecting and setting How to connect and setupConfirm the settings Operate with the remote controllerAmplifier Section General SpecificationsVideo Section Tuner SectionMemo Memo Memo Onkyo Europe Electronics GmbH UK Branch Onkyo Europe Electronics GmbH

HT-R390 specifications

The Onkyo HT-R390 is a versatile and powerful home theater receiver designed to bring an exceptional audio experience to your living space. Known for its combination of affordability and performance, the HT-R390 seamlessly integrates into any home entertainment setup, providing a wide range of features and technologies that enhance both sound quality and usability.

One of the standout features of the Onkyo HT-R390 is its robust power output, delivering up to 100 watts per channel across a 5.1-channel configuration. This ensures that users can experience rich, dynamic sound whether they are watching movies, listening to music, or playing video games. The receiver also supports various surround sound formats, including Dolby TrueHD and DTS-HD Master Audio, allowing for an immersive audio experience that complements high-definition video.

Connectivity options are abundant with the HT-R390. The receiver is equipped with multiple HDMI inputs, making it easy to connect various sources such as Blu-ray players, gaming consoles, and streaming devices. It also features audio return channel (ARC) support, which simplifies the connection between your television and the receiver, allowing for streamlined audio playback from your TV's built-in apps. Additionally, the receiver includes a variety of inputs, such as optical and coaxial digital inputs, as well as analog audio inputs, providing versatility for connecting legacy devices.

Another notable feature is the Onkyo HT-R390's compatibility with user-friendly technologies. It offers built-in Bluetooth connectivity, making it easy to stream music directly from smartphones or tablets without the need for cords. The receiver's high-current amplification also ensures that even lower-impedance speakers can be driven effectively, providing a clean and powerful performance across a wide range of speaker selections.

The receiver also comes with a user-friendly setup process, aided by the included setup microphone that helps calibrate the sound to suit the specific acoustics of your room. This feature optimizes audio performance, ensuring a balanced soundstage and accurate reproduction of movie soundtracks or musical performances.

In conclusion, the Onkyo HT-R390 stands out in the competitive market of home theater receivers due to its combination of powerful audio performance, versatile connectivity options, and user-friendly features. For anyone looking to upgrade their home entertainment system, the HT-R390 provides an excellent balance of affordability and high-quality sound reproduction.
Top Page Image Contents