Onkyo HT-R390 Using an RIHD-compatible TV, Player, or Recorder, About p-compatible components

Page 50

Using an RIHD-compatible TV, Player, or Recorder

p, which stands for Remote Interactive over HDMI, is the name of the system control function found on Onkyo components. The AV receiver can be used with CEC (Consumer Electronics Control), which allows system control over HDMI and is part of the HDMI standard. CEC provides interoperability between various components, however, operation with components other than p-compatible components cannot be guaranteed.

About p-compatible components

The following components are p-compatible. (As of January 2011)

■TV

•Toshiba REGZA-LINK compatible TV

•Sharp TV

■Players/Recorders

•Onkyo and Integra p-compatible players

•Toshiba REGZA-LINK compatible players and recorders (only when used together with Toshiba REGZA-LINK compatible TV)

•Sharp players and recorders (only when used together with Sharp TV)

*Models other than those mentioned above may have some interoperability if compatible with CEC which is part of the HDMI Standard, but operation cannot be guaranteed.

Note

•Do not connect the p-compatible component more than the following number to the HDMI input terminal so that the linked operations work properly.

–Blu-ray Disc/DVD player is up to three.

–Blu-ray Disc recorder/DVD recorder/Digital Video Recorder is up to three.

–Cable/Satellite Set-top box is up to four.

•Do not connect the AV receiver to the other AV receiver/AV amplifier via HDMI.

•When the p-compatible component more than the above-mentioned is connected, the linked operations are not guaranteed.

Operations that can be performed with

pconnection

■For p-compatible TV

The following linked operation is possible by connecting the AV receiver to an p-compatible TV.

•The AV receiver will enter Standby mode when the power of the TV is turned to Standby.

•You can set on the menu screen of the TV to either output the audio from the speakers connected to the AV receiver, or from the speakers of the TV.

•It is possible to output the video/audio from the antenna or from the input jack of the TV from the speakers connected to the AV receiver. (A connection such as optical digital cable or similar is required above the HDMI cable.)

•Input to the AV receiver can be selected with the remote controller of the TV.

•Operations such as volume adjustment or similar for the AV receiver can be performed from the remote controller of the TV.

■For p-compatible players/recorders

The following link operation is possible by connecting the AV receiver to an p-compatible player/recorder.

•When the playback is started on the player/recorder, input of the AV receiver will switch to the HDMI input of the player/recorder that is playing back.

•Operation of the player/recorder is possible with the remote controller supplied with the AV receiver.

*Not all functions may operate depending on the model.

En

50

Page 49 Page 51
Image 50
Page 49 Page 51
Contents HT-R390 HT-R290 Attain an abnormal high temperature Local regulations when disposing of batteriesTemperature protection operates if the apparatus 10 cm 4 at the rear. The rear edge of the shelf orPrecautions Installing the batteries Supplied AccessoriesMake sure you have the following accessories Aiming the remote controllerContents Processing FeaturesAmplifier MiscellaneousFront & Rear Panels Listening Mode buttonsMemory button Tuning Mode button Display button Front PanelRear Panel Remote Control jackDisplay Front A, CENTER, SURR, SUBWOOFER, Front BControlling the AV Receiver Remote ControllerDisplay button TUN Mode button CH +/- button SP A/B buttonConnecting the Speaker Cables Connecting the AV ReceiverConnecting Your Speakers Using a Passive SubwooferNumber of channels Speaker ConfigurationSpeaker Connection Precautions Front speakers Center speaker Surround speakersAV Cables and Jacks About AV ConnectionsConnected image with AV components Hdmi cableJack Components Connecting Components with HdmiAudio return channel ARC function TipSee Recording to make a connection for video recording Connecting Your ComponentsHow to record the video Jack Components AssignableSystem On/Auto Power On Connecting Onkyo uComponentsConnecting a Recording Component Remote ControlConnecting Antenna Connecting the Power CordTurning On See Auto Standby about a power management settingTurning On/Off the AV Receiver Turning OffPlayback Using the TunerTuning into Radio Stations Listening to AM/FM RadioMode Presetting AM/FM StationsUsing RDS excluding North American and Brazilian models Enter Displaying Radio Text RTFinding Stations by Type PTY Listening to Traffic News TPSelecting Listening Modes Using Basic FunctionsUsing the Listening Modes About Listening ModesListening Modes Speaker LayoutOnkyo-Original DSP Listening Modes Listening modes cannot be selected with some source formats Using the Home Menu Selecting Speakers a and B Using the Sleep TimerDisplaying Source Information Setting the Display BrightnessUsing the Music Optimizer Changing the Input DisplayRecording Using HeadphonesMuting the AV Receiver AV RecordingCommon Procedures in Setup Menu Advanced SetupOn-screen Setup Menus BD/DVDDigital Audio Digital Audio Input Hdmi InputComponent Component Video Input Explanatory NotesSp Config Speaker Configuration Left, Center*1, Right, Surround Right, Surround Sp Distance Speaker Distance Level Cal Level CalibrationUnit Subwoofer*1Dolby Settings Audio AdjustMultiplex/Mono Settings DTS SettingAudyssey Source SetupDynamic Volume Dynamic EQName Setting the Incoming Digital Signal Fixed ModeSync Audio SelectorHardware Hdmi SetupRemote Control TunerAudio Return Ch ARC Hdmi ThroughAudio TV Out LipSyncSpeaker Levels Using the Audio SettingsTone Control Late Night FunctionMusic Optimizer Music OptimizerCinemaFILTER Cinema FilterUP-A1 Dock Using the Onkyo DockIPod/iPhone Playback via Onkyo Dock With the RI Control Controlling Your iPod/iPhoneRI Dock Without the RI ControlAvailable buttons Remote Control Codes for Onkyo Components Connected via u Preprogrammed Remote Control CodesEntering Remote Control Codes Controlling Other Onkyo ComponentsControlling Other Components Resetting Remote Mode ButtonsResetting the Remote Controller Controlling a Blu-ray Disc/DVD Player, HD DVD PlayerDisc + Components Buttons DVDplayerCassettetape deck Audio TroubleshootingPower Video UP-A1 Dock for iPod/iPhone Remote ControllerTuner Recording OthersAudio Connection Formats Connection Tips and Video Signal PathVideo Connection Formats About Copyright Protection About HdmiSupported Audio Formats Operations that can be performed with Connection Using an RIHD-compatible TV, Player, or RecorderAbout p-compatible components Confirm the settings How to connect and setupConfirm the connecting and setting Operate with the remote controllerVideo Section SpecificationsAmplifier Section General Tuner SectionMemo Memo Memo Onkyo Europe Electronics GmbH Onkyo Europe Electronics GmbH UK Branch

HT-R390 specifications

The Onkyo HT-R390 is a versatile and powerful home theater receiver designed to bring an exceptional audio experience to your living space. Known for its combination of affordability and performance, the HT-R390 seamlessly integrates into any home entertainment setup, providing a wide range of features and technologies that enhance both sound quality and usability.

One of the standout features of the Onkyo HT-R390 is its robust power output, delivering up to 100 watts per channel across a 5.1-channel configuration. This ensures that users can experience rich, dynamic sound whether they are watching movies, listening to music, or playing video games. The receiver also supports various surround sound formats, including Dolby TrueHD and DTS-HD Master Audio, allowing for an immersive audio experience that complements high-definition video.

Connectivity options are abundant with the HT-R390. The receiver is equipped with multiple HDMI inputs, making it easy to connect various sources such as Blu-ray players, gaming consoles, and streaming devices. It also features audio return channel (ARC) support, which simplifies the connection between your television and the receiver, allowing for streamlined audio playback from your TV's built-in apps. Additionally, the receiver includes a variety of inputs, such as optical and coaxial digital inputs, as well as analog audio inputs, providing versatility for connecting legacy devices.

Another notable feature is the Onkyo HT-R390's compatibility with user-friendly technologies. It offers built-in Bluetooth connectivity, making it easy to stream music directly from smartphones or tablets without the need for cords. The receiver's high-current amplification also ensures that even lower-impedance speakers can be driven effectively, providing a clean and powerful performance across a wide range of speaker selections.

The receiver also comes with a user-friendly setup process, aided by the included setup microphone that helps calibrate the sound to suit the specific acoustics of your room. This feature optimizes audio performance, ensuring a balanced soundstage and accurate reproduction of movie soundtracks or musical performances.

In conclusion, the Onkyo HT-R390 stands out in the competitive market of home theater receivers due to its combination of powerful audio performance, versatile connectivity options, and user-friendly features. For anyone looking to upgrade their home entertainment system, the HT-R390 provides an excellent balance of affordability and high-quality sound reproduction.
Top Page Image Contents