Onkyo Comprehensive Guide to Speaker Configuration and HT-R390 Features

Page 11

Speaker Configuration

The following table indicates the channels you should use depending on the number of speakers that you have.

No matter how many speakers you use, a passive subwoofer is recommended for a really powerful and solid bass.

To get the best from your surround sound system, you need to set the speaker settings manually (page 29).

Number of channels

2

3

4

5

Front speakers

 

 

 

 

 

Center speaker

 

 

 

 

 

 

 

Surround speakers

 

 

 

 

 

 

 

Connecting the Speaker Cables

The AV receiver’s positive (+) speaker terminals are color-coded for ease of identification. (The negative (–) speaker terminals are all black.)

Speaker

Color

 

 

Front left

White

 

 

Front right

Red

 

 

Center

Green

 

 

Surround left

Blue

 

 

Surround right

Gray

 

 

Subwoofer

Purple

 

 

Speaker Connection Precautions

Read the following before connecting your speakers:

You can connect speakers with an impedance of between 6 and 16 ohms. If you use speakers with a lower impedance, and use the amplifier at high volume levels for a long period of time, the built-in amp protection circuit may be activated.

Disconnect the power cord from the wall outlet before making any connections.

Read the instructions supplied with your speakers.

Pay close attention to speaker wiring polarity. In other words, connect positive (+) terminals only to positive (+) terminals, and negative (–) terminals only to negative (–) terminals. If you get them the wrong way around, the sound will be out of phase and will sound unnatural.

Unnecessarily long, or very thin speaker cables may affect the sound quality and should be avoided.

Be careful not to short the positive and negative wires. Doing so may damage the AV receiver.

Make sure the metal core of the wire does not have contact with the AV receiver’s rear panel. Doing so may damage the AV receiver.

Don’t connect more than one cable to each speaker terminal. Doing so may damage the AV receiver.

Don’t connect one speaker to several terminals.

En

11

Image 11
Contents HT-R390 HT-R290 10 cm 4 at the rear. The rear edge of the shelf or Local regulations when disposing of batteriesTemperature protection operates if the apparatus Attain an abnormal high temperaturePrecautions Aiming the remote controller Supplied AccessoriesMake sure you have the following accessories Installing the batteriesContents Miscellaneous FeaturesAmplifier ProcessingFront Panel Listening Mode buttonsMemory button Tuning Mode button Display button Front & Rear PanelsFront A, CENTER, SURR, SUBWOOFER, Front B Remote Control jackDisplay Rear PanelSP A/B button Remote ControllerDisplay button TUN Mode button CH +/- button Controlling the AV ReceiverUsing a Passive Subwoofer Connecting the AV ReceiverConnecting Your Speakers Connecting the Speaker CablesFront speakers Center speaker Surround speakers Speaker ConfigurationSpeaker Connection Precautions Number of channelsHdmi cable About AV ConnectionsConnected image with AV components AV Cables and JacksTip Connecting Components with HdmiAudio return channel ARC function Jack ComponentsJack Components Assignable Connecting Your ComponentsHow to record the video See Recording to make a connection for video recordingRemote Control Connecting Onkyo uComponentsConnecting a Recording Component System On/Auto Power OnConnecting the Power Cord Connecting AntennaTurning Off See Auto Standby about a power management settingTurning On/Off the AV Receiver Turning OnListening to AM/FM Radio Using the TunerTuning into Radio Stations PlaybackMode Presetting AM/FM StationsUsing RDS excluding North American and Brazilian models Listening to Traffic News TP Displaying Radio Text RTFinding Stations by Type PTY EnterAbout Listening Modes Using Basic FunctionsUsing the Listening Modes Selecting Listening ModesListening Modes Speaker LayoutOnkyo-Original DSP Listening Modes Listening modes cannot be selected with some source formats Using the Sleep Timer Using the Home Menu Selecting Speakers a and BChanging the Input Display Setting the Display BrightnessUsing the Music Optimizer Displaying Source InformationAV Recording Using HeadphonesMuting the AV Receiver RecordingBD/DVD Advanced SetupOn-screen Setup Menus Common Procedures in Setup MenuExplanatory Notes Hdmi InputComponent Component Video Input Digital Audio Digital Audio InputSp Config Speaker Configuration Subwoofer*1 Sp Distance Speaker Distance Level Cal Level CalibrationUnit Left, Center*1, Right, Surround Right, SurroundDTS Setting Audio AdjustMultiplex/Mono Settings Dolby SettingsDynamic EQ Source SetupDynamic Volume AudysseyAudio Selector Setting the Incoming Digital Signal Fixed ModeSync NameTuner Hdmi SetupRemote Control HardwareLipSync Hdmi ThroughAudio TV Out Audio Return Ch ARCLate Night Function Using the Audio SettingsTone Control Speaker LevelsCinema Filter Music OptimizerCinemaFILTER Music OptimizerUP-A1 Dock Using the Onkyo DockIPod/iPhone Playback via Onkyo Dock Without the RI Control Controlling Your iPod/iPhoneRI Dock With the RI ControlAvailable buttons Controlling Other Onkyo Components Preprogrammed Remote Control CodesEntering Remote Control Codes Remote Control Codes for Onkyo Components Connected via uControlling a Blu-ray Disc/DVD Player, HD DVD Player Resetting Remote Mode ButtonsResetting the Remote Controller Controlling Other ComponentsDisc + Components Buttons DVDplayerCassettetape deck Audio TroubleshootingPower Video UP-A1 Dock for iPod/iPhone Remote ControllerTuner Others RecordingAudio Connection Formats Connection Tips and Video Signal PathVideo Connection Formats About Copyright Protection About HdmiSupported Audio Formats Operations that can be performed with Connection Using an RIHD-compatible TV, Player, or RecorderAbout p-compatible components Operate with the remote controller How to connect and setupConfirm the connecting and setting Confirm the settingsTuner Section SpecificationsAmplifier Section General Video SectionMemo Memo Memo Onkyo Europe Electronics GmbH UK Branch Onkyo Europe Electronics GmbH

HT-R390 specifications

The Onkyo HT-R390 is a versatile and powerful home theater receiver designed to bring an exceptional audio experience to your living space. Known for its combination of affordability and performance, the HT-R390 seamlessly integrates into any home entertainment setup, providing a wide range of features and technologies that enhance both sound quality and usability.

One of the standout features of the Onkyo HT-R390 is its robust power output, delivering up to 100 watts per channel across a 5.1-channel configuration. This ensures that users can experience rich, dynamic sound whether they are watching movies, listening to music, or playing video games. The receiver also supports various surround sound formats, including Dolby TrueHD and DTS-HD Master Audio, allowing for an immersive audio experience that complements high-definition video.

Connectivity options are abundant with the HT-R390. The receiver is equipped with multiple HDMI inputs, making it easy to connect various sources such as Blu-ray players, gaming consoles, and streaming devices. It also features audio return channel (ARC) support, which simplifies the connection between your television and the receiver, allowing for streamlined audio playback from your TV's built-in apps. Additionally, the receiver includes a variety of inputs, such as optical and coaxial digital inputs, as well as analog audio inputs, providing versatility for connecting legacy devices.

Another notable feature is the Onkyo HT-R390's compatibility with user-friendly technologies. It offers built-in Bluetooth connectivity, making it easy to stream music directly from smartphones or tablets without the need for cords. The receiver's high-current amplification also ensures that even lower-impedance speakers can be driven effectively, providing a clean and powerful performance across a wide range of speaker selections.

The receiver also comes with a user-friendly setup process, aided by the included setup microphone that helps calibrate the sound to suit the specific acoustics of your room. This feature optimizes audio performance, ensuring a balanced soundstage and accurate reproduction of movie soundtracks or musical performances.

In conclusion, the Onkyo HT-R390 stands out in the competitive market of home theater receivers due to its combination of powerful audio performance, versatile connectivity options, and user-friendly features. For anyone looking to upgrade their home entertainment system, the HT-R390 provides an excellent balance of affordability and high-quality sound reproduction.