Mitsubishi Electronics DX-ZD6UE operation manual Connections, Startup

Page 10

Connections (continued)

Startup

Step

Step

1 Turn ON the MAIN switch on the rear of this unit.

2Turn on the MAIN switch on the rear of the recorder.

•The POWER indicator of this unit illuminates when the power supply of this unit is not linked with the recorder.

Step 3 After “POWER OFF” is displayed on the LCD of the recorder, press the POWER button on the front panel of the recorder.

•The indicators of HDD 1 and HDD 2 on the front panel of this unit momentarily blink green.

•When the power supply of this unit is linked with the recorder, you can turn on the power of this unit by pressing the POWER button on the front panel of the recorder.

•When the power of the recorder is turned on, the connection is completed.

Tips

•For the operation of the recorder, refer to the installation and operation manual supplied with the recorder.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents DX-ZD6UE Unplug the Power Cord During a Long Absence Mains Lead Connection DisclaimerFeatures/Contents Major operations and their functions Front viewRear view English Connectable recorders ConnectionsConnection example Precautions for connection Connections StartupSetting the ID number of this unit Setting the ID number of this unitSet the ID rotary switch to the desired number HDD operation mode Setting the mode of this unitMode selection Step Removing the HDD Precautions for replacing the HDDReplacing the HDD Remove the screws Remove the front coversRemove the HDD Pull out the HDD tray halfwayRemove the cords Attaching the HDD Attach the new HDD onto the HDD tray with 4 screwsAttach the front covers Troubleshooting Diagnosis by HDD indicatorsMaintenance TroubleshootingDescription of problem Please check the following Specifications Control input/output terminals and circuitsMitsubishi Digital Electronics AMERICA, INC
Top Page Image Contents