Mitsubishi Electronics DX-ZD6UE Pull out the HDD tray halfway, Remove the HDD, Remove the cords

Page 15

Step 4 Disconnect 2 cords connected to the circuit board on the metal part.

Step 5 Remove the metal part.

• Remove 4 screws on the metal part.

Step 6 Pull out the HDD tray halfway.

Step 8 Pull out the HDD tray.

• Pull out the HDD tray completely.

Step 9 Remove the HDD.

•Remove 4 screws securing the HDD and then remove the HDD from the frame.

ENGLISH

HDD 1

HDD 2

Step 7 Remove the cords.

Notice

•Because S-ATA connectors of HDD are very delicate, connect or disconnect the cords gently without applying excessive force to the connectors.

Take special care to connect or disconnect the connectors straight in order to prevent vertical force from being applied to them.

S-ATA connectors

15

Image 15

Contents DX-ZD6UE Unplug the Power Cord During a Long Absence Disclaimer Mains Lead ConnectionFeatures/Contents Front view Major operations and their functionsRear view English Connections Connectable recordersConnection example Precautions for connection Startup ConnectionsSetting the ID number of this unit Setting the ID number of this unitSet the ID rotary switch to the desired number Setting the mode of this unit HDD operation modeMode selection Step Remove the screws Remove the front covers Precautions for replacing the HDDReplacing the HDD Removing the HDDPull out the HDD tray halfway Remove the HDDRemove the cords Attach the new HDD onto the HDD tray with 4 screws Attaching the HDDAttach the front covers Diagnosis by HDD indicators TroubleshootingTroubleshooting MaintenanceDescription of problem Please check the following Control input/output terminals and circuits SpeciﬁcationsMitsubishi Digital Electronics AMERICA, INC