Mitsubishi Electronics FD730U Image adjustment, Adjusting projected images, Color Enhancer

Image adjustment

Adjusting projected images

To adjust the brightness (CONTRAST and BRIGHT- NESS):

You can make adjustments of the brightness of the projected image using the menu.

(See page 20 or 22 for the menu options.)

1.Display the QUICK MENU or the IMAGE menu.

2.	Select CONTRAST or BR IGHTNESS by pressing the or
	button.
3.	Adjust the selected option by pressing the or button.

To cancel the menu:

4.Press the MENU button.

CONTRAST

Select to adjust the contrast of the image. Every time the button is pressed, the image becomes brighter and more clearly defined. Every time the button is pressed, the image becomes darker and less clearly defined.

To adjust the tone of white (To customize the color tem- perature):

To set (and store) a user-defined color temperature, perform the fol- lowing procedure.

(See page 22 for the menu options.)

1.Select COLOR TEMP. in the IMAGE menu.

2.Press theorbutton to select USER .

3.Press the ENTER button.

4.Press theorbutton to select the desired setting.

5.Press theorbutton to adjust the selected setting.

6.Repeat steps 4 and 5 for optimal adjustment results.

COLOR TEMP.-USER

CONTRAST R	0
CONTRAST G	0
CONTRAST B	0
BRIGHTNESS R	0
BRIGHTNESS G	0
BRIGHTNESS B	0

BRIGHTNESS

Every time the	button is pressed, the image becomes brighter.
Every time the	button is pressed, the image becomes darker.

To adjust the color (COLOR and TINT):

You can adjust the color of the projected image using the menu. (See page 22 for the menu options.)

1.Display the IMAGE menu.

2. Select COLOR or TINT by pressing the or button.

•COLOR and TINT is selectable only when the input signal is

VIDEO.

•TINT is selectable only when the NTSC or 4.43NTSC signal is input.

3. Adjust the selected option by pressing the or button.

To cancel the menu:

4.Press the MENU button.

COLOR

Use to adjust the color density of the projected image. Every time the button is pressed, the color becomes darker. Every time the but-

ton is pressed, the color becomes lighter.

To cancel the menu:

7.Press the MENU button.

To enable the stored color temperature:

1.Set COLOR TEMP. to USER in the IMAGE menu.

About color temperature

There are different variations in white color. Color temperature is a way to show these variations in white. When the temperature is low, white appears reddish. When the temperature rises, white appears bluish. For example, you can change the temperature using the following procedures.

To raise the temperature: Increase CONTRAST B (blue) and decrease CONTRAST R (red).

To reduce the temperature: Decrease CONTRAST B (blue) and increase CONTRAST R (red).

•If you set CONTRAST R, G, and B to negative values, the brightness of the image can't retain the original even when you maximize the value of CONTRAST in the QUICK MENU or the IMAGE menu.

TINT				button	Color Enhancer
Use to adjust the tint of the projected image. Every time the					You can set user-defined values for the brightness and hue using the
is pressed, the image appears more greenish. Every time the				but-
					menu. (See page 22 for the menu options.)
ton is pressed, the image appears more reddish.
					1.	Display the IMAGE menu.
To sharpen or soften the projected image (SHARPNESS):
					2.	Select COLOR ENHANCER by pressing the or button.
You can adjust the sharpness of the projected image using the menu.					3.	Select USER			by pressing the		or button.
(See page 20 or 22 for the menu options.)					4.	Press the ENTER button.
1.	Display the QUICK MENU or the IMAGE menu.
					5.	Select a setting you want to set.
2.	Select SHARPNESS by pressing the	or	button.
3.	Adjust the selected option by pressing the		or button.					COLOR			AUTO
								ENHANCER
To cancel the menu:
							COLOR ENHANCER-USER
4.	Press the MENU button.							GAMMA MODE		DYNAMIC
To adjust the tone of white (COLOR TEMP.):								BrilliantColorTM			10
								RGB-COLOR			0
You can select a preset color temperature (white tone) using the
								RGB-TINT			0
menu.
					GAMMA mode
(See page 20 or 22 for the menu options.)
1.	Display the QUICK MENU or the IMAGE menu.				Use this setting to set an optimal gamma value and modulation of
					lamp power. The level of brightness can be adjusted for subdued
2.	Select COLOR TEMP. by pressing the	or	button.
					colors.
3.	Select your desired color temperature by pressing the			or
						DYNAMIC ............Select when viewing crisp, clear images in a
	button.
								brightly lit room or strong daylight.
To cancel the menu:
								The level of brightness is adjusted to higher levels.
4. Press the MENU button.						NATURAL ............Select when viewing images of which colors are
								more faithfully reproduced.
								The level of brightness and vividness is adjusted
								to optimal levels.

	DETAIL ................Select when viewing images of which brightness
	should be kept relatively low, such as movies
EN-27	and music video clips.