Mitsubishi Electronics FD730U-G user manual Network settings

Page 31

Network settings (continued)

Setting or Clearing DHCP

1.Display the IP CONFIG menu.

2.Press theorbutton to select DHCP.

DHCP

ON

 

 

3.Press the ENTER button.

•Confirmation dialog appears.

4.Press theorbutton to select ON or OFF .

5.Select the item to set, and press the ENTER button.

•To cancel the setting, press the MENU button.

•It may take some time to reflect the settings.

•When setting DHCP to ON, IP ADDRESS, SUBNET MASK, and DEFAULT GATEWAY cannot be set. If you set those set- tings, set DHCP to OFF and perform the IP settings as the following procedures.

IP Address Settings

1.Display the IP CONFIG menu.

2.Press theorbutton to select IP ADDRESS.

IP ADDRESS

SET

3.Press theorbutton to select SET .

4.Press the ENTER button.

•IP ADDRESS screen appears.

5.Press the direction buttons to move the key cursor, select the numbers to enter, and press the ENTER button.

•Set the numeric value within the range from 0 to 255. How- ever, set the numeric value for the final octet within the range from 1 to 254.

← key: Shifting the position of enter cursor to the left.

→key: Shifting the position of enter cursor to the right. DEL key:Deleting the character in the position of enter cur-

sor for each character.

6.When selecting OK, the setting is completed as the IP ADDRESS stored. However, when selecting CANCEL, the set- ting is completed without storing.

•It may take some time to reflect the settings.

Subnet Mask Settings

1.Display the IP CONFIG menu.

2.Press theorbutton to select SUBNET MASK.

SUBNET MASK

SET

3.Press theorbutton to select SET .

4.Press the ENTER button.

•SUBNET MASK screen appears.

5.Enter the Subnet Mask.

•Refer to IP Address Settings for the detail of entering.

6.When selecting OK, the setting is completed as the Subnet Mask stored. However, when selecting CANCEL, the setting is completed without storing.

• It may take some time to reflect the settings.

Default Gateway Settings

1.Display the IP CONFIG menu.

2.Press theorbutton to select DEFAULT GATEWAY.

DEFAULT

SET

GATEWAY

 

3.Press theorbutton to select SET .

4.Press the ENTER button.

•DEFAULT GATEWAY screen appears.

5.Enter the Default Gateway.

•Refer to IP Address Settings for the detail of entering.

6.When selecting OK, the setting is completed as the Default Gateway stored. However, when selecting CANCEL, the setting is completed without storing.

•It may take some time to reflect the settings.

Setting or Clearing PJLink Certification

Perform the settings to start PJLink protocol communication.

•See page 35 for the detail of PJLink.

1.Display the NETWORK menu. (See page 22 for menu setting.)

2.Press theorbutton to select PJLink CERTIFICATION.

PJLink

ON

CERTIFICATION

 

3.Press the ENTER button.

•Confirmation dialog appears.

4.Press theorbutton to select ON or OFF .

5.Select the item to set, and press the ENTER button.

•To cancel the setting, press the MENU button.

•It may take some time to reflect the settings.

Initialization of Network Settings

1.Display the NETWORK menu. (See page 22 for menu setting.)

2.Press theorbutton to select NETWORK RESET.

NETWORK RESET

OK

3.Press the ENTER button.

•Confirmation dialog appears.

4.If pressing the ENTER button again, the Network Settings can be initialized.

•It may take some time to reflect the settings.

EN-31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents FD730U FD730U-G EN-2 Contents Important safeguards Do not block the intake and exhaust vents Important safeguardsNever remove the cabinet Do not modify this equipment Use correct voltageControl panel OverviewTerminal panel Overview Bottom side Remote controlInserting the batteries into the remote control Remote controlBattery installation Operation range of the remote controlScreen size and projection distance InstallationWhen the aspect ratio of the screen is When the aspect ratio of the image isRear projection InstallationCeiling mount installation Front projection, ceiling mountingProjector + AV device Basic connectionsProjector + DVD player or Hdtv decoder Connection for video equipment having an Hdmi terminal Basic connectionsHdmi For computer with mini D-SUB Projector + ComputerPreparation Adjusting the position of the projected imageAdjustment of the projection angle Using the adjustment feet frontPreparation When projected images are distorted to a trapezoidFollowing cases Basic operation Power-onBasic operation Power-offDirect Power OFF Volume from the speakerWall Screen Setting the aspect ratioWhen connecting to a laptop computer AV mutePresentation Menu operationQuick Menu Basic operation Quick MenuMenu Options Menu operationInformation menu Detail Menu Image menu Basic operationImage Advanced menu Installation menu Feature menu Signal Resolution Memorize menu Signal menuSignal User menu Menu Network menuColor Enhancer Image adjustmentAdjusting projected images Gamma modeYES Image adjustmentHow to adjust the computer image BrilliantColorLPF Progressive filter Simple method to adjust the image positionTo adjust the horizontal position To adjust the vertical positionIP Settings Network settingsSetting Projector Name Network Password SettingsNetwork settings Glossary How to Use Network FunctionDhcp Setting of the image displayed during startup or muting Advanced featuresSplit Magnify Advanced featuresPassword function FreezeMajor functions Setting the efficient modeConnection PJLink supported commandsWhen the projector is placed on the table Lamp replacementWhen the projector is mounted to the ceiling Reset of the lamp operation time Lamp replacementInterval of lamp replacement Status TroubleshootingNo image appears on the screen Problem Solution PowerImages are not displayed correctly Problem Solution TroubleshootingOthers Problem Solution Kensington Lock MaintenanceCleaning of the projector and the vents Cleaning of the lensNormal condition IndicatorsAbnormal condition YPBPR/YCBCR SpecificationsReplacement part option/not included in the box SpecificationsConnectors Dimension drawings unit mmVGA60 CGA70CGA84 CGA85Native mode Zusho Baba, Nagaokakyo-City, Kyoto Japan
Top Page Image Contents