PLUS Vision U5-632, U5-532, U5-512 Image, Brightness / Contrast / Color / Tint / Sharpness

Page 48

Image

•Perform this operation while projecting the picture for which the adjustment/setting will be made.

•Select the menu name “Image”.

See “Menu Operation Method” on Page E-40 for information about performing menu operations. The item name display will differ depending on the input signal. See “List of Item Names Offering Input Selection and Adjustments/Settings” on Page E-45.

Brightness / Contrast / Color / Tint / Sharpness

Picture qualities such as brightness and contrast will change depend- ing on the whether the room is bright or dark. Please adjust to suit your preference.

Select the desired item name and then adjust with the SELECT (￿￿) buttons.

Item Name

SELECT ◀ Button

SELECT ▶ Button

Brightness

Darker

Brighter

Contrast

Less contrast

More contrast

Color

Less dense color

Denser color

Tint

More red

More green

Sharpness

Softer image

Sharper image

 

 

 

Note:

* The adjustment values of the adjustable items are stored according to input source. * “Tint” can only be adjusted when inputting NTSC composite/S-Video signals or

component signals.

Picture Adj. / Fine Picture / H Position / V Position

Usually, automatic adjustment is performed at the time of signal selec- tion, but when automatic adjustment is not effective, these adjustments can be performed.

Note:

When the image extends beyond the boundaries of the screen or is smaller than the screen, check that the “View” → “Aspect” setting is set to “Auto”. See “Aspect” on Page E-52.

Picture Adj. (Picture Adjustment)

Adjust this when bright and dark vertical bands appear on the screen.

Select the “Picture Adj.” item name and adjust with the SELECT (￿￿) buttons so that the vertical bands disappear and brightness becomes uniform across the screen.

E-47

Page 47 Page 49
Image 48
Page 47 Page 49
Contents U5-632 U5-532/U5-512 Precautions This label is located on the side of the remote controlDo not look at the laser pointer’s light source Important Safety Information DOC Compliance NoticeInstallation Power SupplyCleaning Lamp ReplacementMajor Features Table of Contents Table of Contents Checking the Supplied Accessories Checking the Supplied Accessories Storage case for projector and accessoriesUSB cable type A, 2 m / 6.6 feet Velcro strap Pocket Cable storage pouchNames of the Main Unit Parts Applicable Projector U5-532/U5 NatsZoom ring E-26 Exhaust Vents Focus ring E-27 Lens Lens capBuilt-in Security Slot Names of the Main Unit PartsNames of Parts/Preparing the Remote Control Unit Names of the Remote Control PartsIncluded with the U5-632 Inserting the BatteriesReplacement Method Temporarily cancels the video Audio Number buttons E-37RGB button and Video button Used for the security lockRemote Control Range Side ViewSide View Top View Procedure Up to Projecting to the Screen Placement Guide U5-632 Screen Size and Projection DistancePlacement Guide U5-532/U5-512 Screen Size and Projection DistancePersonal computer RGB signal cable Supplied item Connections with Personal ComputerTo Output the External Output Signal of a Notebook Computer Connecting Personal Computers and Video EquipmentManufacturer Model Key Connections with Composite Signals Video Equipment with Video ConnectorsVideo Equipment with S-VIDEO Connectors → Video See Input Format on Page E-56Connections with Component Signals Component cable Available as an option Order codeGreen Blue Red Cb Cr Pb Pr Green Blue RedConnections with the Audio Jack Audio cable Supplied item Audio conversion adapter RedAudio cable Supplied item Connecting Personal Computers and Video Equipment Switch on the projector power OperatingPower Cable Connections and Switching the Power On/Off Press the Enter button to setThis completes the selection of the display language CursorUnplug the power cable FinishingStandby button on main unit Adjustment of the Projection Screen Adjustment of the Projection ScreenAdjust the projection image to the screen Zoom ringMaking Adjustments with the Adjusters Adjuster buttonFocus ring Raising the projection imageAutomatic Adjustment When Auto Source is OnWhen Auto Source is Off General OperationVideo Signals / Component Signals Selection of Aspect RatioGeneral Operation Cancelling Video and Audio Temporarily Lamp ModeFreezing a Moving Picture Adjustment of the Volume Press the Cancel button to immediately close the displayKeystone Enlargement of the Image and Video Movement Image can also be moved in the following circumstancesPress the Zoom button to enlarge the image Using the Presentation Timer Using the Laser Pointer OperationConnecting the computer and projector Click button on backJOG buttons Click buttonControlling the Projector from Computer Use as a High-Brightness Monochrome ProjectorApplicable Projector U5-632 Serial cable D-Sub 9-pin, straight commercially availableUse the number buttons 1 to 4 to register the password Example Registering the passwordProtecting the Projector with the Security Lock All four placesInput the password using the number buttons 1 to Canceling the password/Changing the passwordCanceling the password Changing the passwordUsing the Quick Menu Content of Adjustments and SettingsPress the cursor or button to make the adjustment To close the display immediately, press the Cancel buttonMenu Operation Method Menu buttonSelect buttons Enter buttonMenu Screen Names and Functions Menu Operation MethodPerforming Menu Operations Menu Display Press the Menu button to display the menuMaking Adjustments/Settings This condition al- lows selection of the item nameSub menu Selecting Another Menu Name with Remote Control Operation Color ViewMenu name Item Name Sub Menu Setup Color B/W SwitchingVideo OptionPicture Adj. Picture Adjustment ImageBrightness / Contrast / Color / Tint / Sharpness Picture Adj. / Fine Picture / H Position / V PositionReset Press of the Enter button forces the resetFine Picture PositionSelect the preset color mode ColorQuick Color Adj GammaSelection contents at the time of YPbPr input Color TempWhite Color SpaceWhite Balance Video Signals ViewAspect FilterPower cable has been unplugged Vertical FlipKeystone Save ViewSetup Color B/W SwitchingAuto Power Off Auto SourceSetup Status indicator is greenStatus indicator is off Menu PositionPresentation Timer To start the timerInput Format Video and S-VideoOption LanguageOn Screen BackgroundStartup Screen Security LockOption Factory Default Lamp Timer ResetInfo StatusResolution / Frequency Lamp TimerInfo When an Indicator is Lit or Flashing Thermal ProtectorTroubleshooting Check the following matters before requesting servicingCleaning Cleaning a Soiled Projector Main UnitCleaning the Inside of the Projector Dirty LensReplacing the Lamp Cartridge Replacing the Lamp Cartridge Remove the lamp cartridgeReset the Lamp Timer Mount the new lamp cartridgeMount the lamp cover Specifications OpticalElectrical MechanicalSpecifications Model U5-532/U5-512U5-532 U5-512Signal Resolution Frequency VideoTable of Supported Frequency U5-632/U5-532Cabinet Dimensions 216240 216 Unit mm inch2005

U5-512, U5-532, U5-632 specifications

The PLUS Vision U5 series includes three impressive models: the U5-532, U5-512, and U5-632. Each model is designed with advanced features and technologies geared towards enhancing visual presentations, making them ideal for business, education, and personal use.

Starting with the U5-532, this model is equipped with a high-resolution display that provides stunning clarity and vibrant colors. Its native resolution ensures that text and images are displayed crisply, making it perfect for detailed presentations. The U5-532 supports multiple connectivity options, including HDMI and USB, allowing users to connect various devices effortlessly. Additionally, it features built-in speakers that deliver clear audio, eliminating the need for external sound systems.

Moving on to the U5-512, this model places a strong emphasis on portability without sacrificing performance. Weighing significantly less than its counterparts, the U5-512 is easy to transport, making it suitable for on-the-go professionals or educators. It supports wireless connectivity, allowing users to mirror their smartphone or tablet displays effortlessly. The model also includes a rechargeable battery, giving users the flexibility to present without being tethered to a power source.

Lastly, the U5-632 stands out with its enhanced brightness and superior contrast ratios. This model is perfect for environments with a lot of ambient light, as it ensures that presentations remain visible even in challenging conditions. In addition to its robust connectivity options, the U5-632 employs advanced image processing technology, which enhances the quality of images and video playback.

Across the entire U5 series, users will find intuitive control interfaces that make navigation easy. The devices come with a remote control, adding convenience for presenters who need to manage their presentations from a distance. Furthermore, the U5 models are designed with energy efficiency in mind, contributing to reduced power consumption without compromising performance.

In summary, the PLUS Vision U5-532, U5-512, and U5-632 represent a significant advancement in presentation technology, each tailored to meet specific user needs. Their blend of high-quality displays, versatility in connectivity, and user-friendly interfaces makes them exceptional tools for anyone looking to make an impact with visual communication.
Top Page Image Contents