PLUS Vision U5-532, U5-632, U5-512 Setup, Color B/W Switching, Auto Source, Auto Power Off

Page 55

Setup

Select menu name “Setup”.

See “Menu Operation Method” on Page E-40 for information about performing menu operations. The item name display will differ depending on the input signal. See “List of Item Names Offering Input Selection and Adjustments/Settings” on Page E-45.

Color B/W Switching

Applicable Projector: U5-632

Documents, spreadsheets or other mostly black and white data can be projected with stronger brightness.

It is possible to switch between the black/white and color mode while an image is being projected.

Select the “Color B/W Switching” item name, then use the ￿ and ￿ SELECT buttons to select the desired setting.

Color

The color image projection mode is set.

B/W

The high brightness black/white image projection mode is set.

Auto Source

The Auto Source function automatically detects the input signal when the power supply is switched on and when the input is switched.

Select the item name “Auto Source” and select the setting contents with the

SELECT (￿￿) buttons.

On

Switches on the automatic detection function

Off

Switches off the automatic detection function

Signal Detection Order When On

The sequence of RGB VIDEO S-VIDEO is searched repeatedly.

When a signal is detected, the search is stopped and the image is projected.

Auto Power Off

This function switches off the projector power automatically when the input of the projector enters a no-signal condition.

Select item name “Auto Power Off” and select the setting contents with the

SELECT (￿￿) buttons.

On

The power is switched off when there is no signal.

Off

The power is not switch off even when there is no signal.

Operation when Function is On

The “No Signal Power Off” display appears when a no-signal condition con- tinues for approximately 10 seconds. The power is switched off about 5 minutes after this.

If a signal is input during the appearance of the display and an operation button other than the STANDBY button is pressed, the display is closed and the function is cancelled.

Note:

Some video decks and other equipment output a blue background or other video when playback ends. When this happens, a signal is being input to the projector and Auto Power Off is not activated.

E-54

Image 55
Contents U5-632 U5-532/U5-512 This label is located on the side of the remote control PrecautionsDo not look at the laser pointer’s light source DOC Compliance Notice Important Safety InformationLamp Replacement InstallationPower Supply CleaningMajor Features Table of Contents Table of Contents Checking the Supplied Accessories Velcro strap Pocket Cable storage pouch Checking the Supplied AccessoriesStorage case for projector and accessories USB cable type A, 2 m / 6.6 feetExhaust Vents Focus ring E-27 Lens Lens cap Names of the Main Unit PartsApplicable Projector U5-532/U5 Nats Zoom ring E-26Names of the Main Unit Parts Built-in Security SlotInserting the Batteries Names of Parts/Preparing the Remote Control UnitNames of the Remote Control Parts Included with the U5-632Used for the security lock Replacement MethodTemporarily cancels the video Audio Number buttons E-37 RGB button and Video buttonSide View Remote Control RangeSide View Top View Procedure Up to Projecting to the Screen U5-632 Screen Size and Projection Distance Placement GuideU5-532/U5-512 Screen Size and Projection Distance Placement GuideConnections with Personal Computer Personal computer RGB signal cable Supplied itemConnecting Personal Computers and Video Equipment To Output the External Output Signal of a Notebook ComputerManufacturer Model Key → Video See Input Format on Page E-56 Connections with Composite SignalsVideo Equipment with Video Connectors Video Equipment with S-VIDEO ConnectorsPb Pr Green Blue Red Connections with Component SignalsComponent cable Available as an option Order code Green Blue Red Cb CrAudio cable Supplied item Audio conversion adapter Red Connections with the Audio JackAudio cable Supplied item Connecting Personal Computers and Video Equipment Operating Switch on the projector powerCursor Power Cable Connections and Switching the Power On/OffPress the Enter button to set This completes the selection of the display languageFinishing Unplug the power cableStandby button on main unit Zoom ring Adjustment of the Projection ScreenAdjustment of the Projection Screen Adjust the projection image to the screenRaising the projection image Making Adjustments with the AdjustersAdjuster button Focus ringGeneral Operation Automatic AdjustmentWhen Auto Source is On When Auto Source is OffSelection of Aspect Ratio Video Signals / Component SignalsGeneral Operation Lamp Mode Cancelling Video and Audio TemporarilyFreezing a Moving Picture Press the Cancel button to immediately close the display Adjustment of the VolumeKeystone Image can also be moved in the following circumstances Enlargement of the Image and Video MovementPress the Zoom button to enlarge the image Using the Presentation Timer Operation Using the Laser PointerClick button Connecting the computer and projectorClick button on back JOG buttonsSerial cable D-Sub 9-pin, straight commercially available Controlling the Projector from ComputerUse as a High-Brightness Monochrome Projector Applicable Projector U5-632All four places Use the number buttons 1 to 4 to register the passwordExample Registering the password Protecting the Projector with the Security LockChanging the password Input the password using the number buttons 1 toCanceling the password/Changing the password Canceling the passwordTo close the display immediately, press the Cancel button Using the Quick MenuContent of Adjustments and Settings Press the cursor or button to make the adjustmentEnter button Menu Operation MethodMenu button Select buttonsMenu Operation Method Menu Screen Names and FunctionsMenu Display Press the Menu button to display the menu Performing Menu OperationsThis condition al- lows selection of the item name Making Adjustments/SettingsSub menu Selecting Another Menu Name with Remote Control Operation View ColorOption Menu name Item Name Sub Menu SetupColor B/W Switching VideoPicture Adj. / Fine Picture / H Position / V Position Picture Adj. Picture AdjustmentImage Brightness / Contrast / Color / Tint / SharpnessPosition ResetPress of the Enter button forces the reset Fine PictureGamma Select the preset color modeColor Quick Color AdjColor Space Selection contents at the time of YPbPr inputColor Temp WhiteWhite Balance Filter Video SignalsView AspectView Power cable has been unpluggedVertical Flip Keystone SaveAuto Source SetupColor B/W Switching Auto Power OffMenu Position SetupStatus indicator is green Status indicator is offVideo and S-Video Presentation TimerTo start the timer Input FormatBackground OptionLanguage On ScreenSecurity Lock Startup ScreenOption Status Factory DefaultLamp Timer Reset InfoLamp Timer Resolution / FrequencyInfo Thermal Protector When an Indicator is Lit or FlashingCheck the following matters before requesting servicing TroubleshootingDirty Lens CleaningCleaning a Soiled Projector Main Unit Cleaning the Inside of the ProjectorReplacing the Lamp Cartridge Remove the lamp cartridge Replacing the Lamp CartridgeMount the new lamp cartridge Reset the Lamp TimerMount the lamp cover Mechanical SpecificationsOptical ElectricalU5-512 SpecificationsModel U5-532/U5-512 U5-532U5-632/U5-532 SignalResolution Frequency Video Table of Supported Frequency216 Unit mm inch Cabinet Dimensions216 2402005

U5-512, U5-532, U5-632 specifications

The PLUS Vision U5 series includes three impressive models: the U5-532, U5-512, and U5-632. Each model is designed with advanced features and technologies geared towards enhancing visual presentations, making them ideal for business, education, and personal use.

Starting with the U5-532, this model is equipped with a high-resolution display that provides stunning clarity and vibrant colors. Its native resolution ensures that text and images are displayed crisply, making it perfect for detailed presentations. The U5-532 supports multiple connectivity options, including HDMI and USB, allowing users to connect various devices effortlessly. Additionally, it features built-in speakers that deliver clear audio, eliminating the need for external sound systems.

Moving on to the U5-512, this model places a strong emphasis on portability without sacrificing performance. Weighing significantly less than its counterparts, the U5-512 is easy to transport, making it suitable for on-the-go professionals or educators. It supports wireless connectivity, allowing users to mirror their smartphone or tablet displays effortlessly. The model also includes a rechargeable battery, giving users the flexibility to present without being tethered to a power source.

Lastly, the U5-632 stands out with its enhanced brightness and superior contrast ratios. This model is perfect for environments with a lot of ambient light, as it ensures that presentations remain visible even in challenging conditions. In addition to its robust connectivity options, the U5-632 employs advanced image processing technology, which enhances the quality of images and video playback.

Across the entire U5 series, users will find intuitive control interfaces that make navigation easy. The devices come with a remote control, adding convenience for presenters who need to manage their presentations from a distance. Furthermore, the U5 models are designed with energy efficiency in mind, contributing to reduced power consumption without compromising performance.

In summary, the PLUS Vision U5-532, U5-512, and U5-632 represent a significant advancement in presentation technology, each tailored to meet specific user needs. Their blend of high-quality displays, versatility in connectivity, and user-friendly interfaces makes them exceptional tools for anyone looking to make an impact with visual communication.