PLUS Vision U5-512, U5-632, U5-532 When an Indicator is Lit or Flashing, Thermal Protector

Page 62

When an Indicator is Lit or Flashing

The indicators on the projector’s control panel light or flash to notify of problems, as described below.

An indicator is also used to notify you of the currently set power mode (under normal circumstances). See “Power Cable Con- nections and Switching the Power On/Off” on page E-23.

STATUS indicator

STANDBY indicator

STATUS

STANDBY

STANDBY

AUTO

 

Indicator status

What you should do

 

 

 

STATUS

Lit red

It is time to replace the lamp.

 

 

 

When the power is on (Lit green)

Replace with a new lamp cartridge.

 

 

STANDBY

Standby (Lit amber)

 

 

 

 

 

 

The lamp has reached the end of its service life.The power

STATUS

Lit red

will no longer turn on.

 

 

The projector can be used for 100 hours after the lamp has

 

 

reached the end of its service life.

STANDBY

Flashing amber for 60 seconds, then lit amber

Replace with a new lamp cartridge.

 

 

 

 

 

STATUS

Flashing red

The lamp cover is open.

 

(lit for 1 seconds/off for 1 seconds)

The lamp cover is not properly mounted. Mount it properly.

STANDBY

Lit red

 

 

 

 

 

 

The temperature is abnormally high.

 

Flashing red

• The temperature protector has been activated. If the room

STATUS

temperature is high, move the projector to a cool place. If

 

(lit for 0.5 seconds/off for 0.5 seconds)

the projector’s internal temperature is high, check the cool-

STANDBY

Lit red

ing fan’s ventilation slots and clean them if they are clogged.

• When the temperature protector is activated, the power turns

 

 

 

off and in some cases will not turn back on immediately. In

 

 

this case wait about 90 seconds, then try again.

 

 

 

STATUS

Flashing red

The fan has stopped.

 

(lit for 0.5 seconds/off for 0.5 seconds)

Unplug the power cable and contact a store that sells the U5-

 

Lit amber

632/U5-532/U5-512 for repairs.

STANDBY

 

 

 

 

 

Flashing red

The lamp will not light.

STATUS

(lit for 1 seconds/off for 1 seconds)

Wait at least 90 seconds, then turn the power back on. If the

 

When the lamp has burned out during use

problem persists, unplug the power cord and contact a store

 

that sells the U5-632/U5-532/U5-512 for repairs.

STANDBY

Flashing amber for 90 seconds, then lit amber

When the lamp does not come on from the start

 

 

 

 

Lit amber

 

 

 

 

Should an indicator be in a condition other than normal or flash at a rate other than the aforementioned, disconnect the power cable and contact your store of purchase.

Thermal Protector

When the temperature inside the projector becomes abnormally high, the STATUS indicator flashes red (0.5 seconds on/0.5 seconds off), the STANDBY indicator is a steady red, and at the same time the temperature protector operates and switches off the power of the projector.

Should this happen, please take the following actions.

1.Switch off the power and disconnect the power plug from the wall outlet.

2.Check the following matters and take the required measures.

When the projector is being used in a location that has a high ambient temperature, set it up again in a cool location. Check the outflow and intake holes and clean them if they are obstructed.

3.Wait about 60 minutes until the temperature of the projector drops.

If after having performed the above matters, the problem still has not been solved, please contact your store of purchase.

E-61

Page 61 Page 63
Image 62
Page 61 Page 63
Contents U5-632 U5-532/U5-512 Do not look at the laser pointer’s light source PrecautionsThis label is located on the side of the remote control Important Safety Information DOC Compliance NoticeCleaning InstallationPower Supply Lamp ReplacementMajor Features Table of Contents Table of Contents Checking the Supplied Accessories USB cable type A, 2 m / 6.6 feet Checking the Supplied AccessoriesStorage case for projector and accessories Velcro strap Pocket Cable storage pouchZoom ring E-26 Names of the Main Unit PartsApplicable Projector U5-532/U5 Nats Exhaust Vents Focus ring E-27 Lens Lens capBuilt-in Security Slot Names of the Main Unit PartsIncluded with the U5-632 Names of Parts/Preparing the Remote Control UnitNames of the Remote Control Parts Inserting the BatteriesRGB button and Video button Replacement MethodTemporarily cancels the video Audio Number buttons E-37 Used for the security lockSide View Top View Remote Control RangeSide View Procedure Up to Projecting to the Screen Placement Guide U5-632 Screen Size and Projection DistancePlacement Guide U5-532/U5-512 Screen Size and Projection DistancePersonal computer RGB signal cable Supplied item Connections with Personal ComputerManufacturer Model Key To Output the External Output Signal of a Notebook ComputerConnecting Personal Computers and Video Equipment Video Equipment with S-VIDEO Connectors Connections with Composite SignalsVideo Equipment with Video Connectors → Video See Input Format on Page E-56Green Blue Red Cb Cr Connections with Component SignalsComponent cable Available as an option Order code Pb Pr Green Blue RedAudio cable Supplied item Connections with the Audio JackAudio cable Supplied item Audio conversion adapter Red Connecting Personal Computers and Video Equipment Switch on the projector power OperatingThis completes the selection of the display language Power Cable Connections and Switching the Power On/OffPress the Enter button to set CursorStandby button on main unit Unplug the power cableFinishing Adjust the projection image to the screen Adjustment of the Projection ScreenAdjustment of the Projection Screen Zoom ringFocus ring Making Adjustments with the AdjustersAdjuster button Raising the projection imageWhen Auto Source is Off Automatic AdjustmentWhen Auto Source is On General OperationGeneral Operation Video Signals / Component SignalsSelection of Aspect Ratio Freezing a Moving Picture Cancelling Video and Audio TemporarilyLamp Mode Keystone Adjustment of the VolumePress the Cancel button to immediately close the display Press the Zoom button to enlarge the image Enlargement of the Image and Video MovementImage can also be moved in the following circumstances Using the Presentation Timer Using the Laser Pointer OperationJOG buttons Connecting the computer and projectorClick button on back Click buttonApplicable Projector U5-632 Controlling the Projector from ComputerUse as a High-Brightness Monochrome Projector Serial cable D-Sub 9-pin, straight commercially availableProtecting the Projector with the Security Lock Use the number buttons 1 to 4 to register the passwordExample Registering the password All four placesCanceling the password Input the password using the number buttons 1 toCanceling the password/Changing the password Changing the passwordPress the cursor or button to make the adjustment Using the Quick MenuContent of Adjustments and Settings To close the display immediately, press the Cancel buttonSelect buttons Menu Operation MethodMenu button Enter buttonMenu Screen Names and Functions Menu Operation MethodPerforming Menu Operations Menu Display Press the Menu button to display the menuSub menu Making Adjustments/SettingsThis condition al- lows selection of the item name Selecting Another Menu Name with Remote Control Operation Color ViewVideo Menu name Item Name Sub Menu SetupColor B/W Switching OptionBrightness / Contrast / Color / Tint / Sharpness Picture Adj. Picture AdjustmentImage Picture Adj. / Fine Picture / H Position / V PositionFine Picture ResetPress of the Enter button forces the reset PositionQuick Color Adj Select the preset color modeColor GammaWhite Selection contents at the time of YPbPr inputColor Temp Color SpaceWhite Balance Aspect Video SignalsView FilterKeystone Save Power cable has been unpluggedVertical Flip ViewAuto Power Off SetupColor B/W Switching Auto SourceStatus indicator is off SetupStatus indicator is green Menu PositionInput Format Presentation TimerTo start the timer Video and S-VideoOn Screen OptionLanguage BackgroundOption Startup ScreenSecurity Lock Info Factory DefaultLamp Timer Reset StatusInfo Resolution / FrequencyLamp Timer When an Indicator is Lit or Flashing Thermal ProtectorTroubleshooting Check the following matters before requesting servicingCleaning the Inside of the Projector CleaningCleaning a Soiled Projector Main Unit Dirty LensReplacing the Lamp Cartridge Replacing the Lamp Cartridge Remove the lamp cartridgeMount the lamp cover Reset the Lamp TimerMount the new lamp cartridge Electrical SpecificationsOptical MechanicalU5-532 SpecificationsModel U5-532/U5-512 U5-512Table of Supported Frequency SignalResolution Frequency Video U5-632/U5-532240 Cabinet Dimensions216 216 Unit mm inch2005

U5-512, U5-532, U5-632 specifications

The PLUS Vision U5 series includes three impressive models: the U5-532, U5-512, and U5-632. Each model is designed with advanced features and technologies geared towards enhancing visual presentations, making them ideal for business, education, and personal use.

Starting with the U5-532, this model is equipped with a high-resolution display that provides stunning clarity and vibrant colors. Its native resolution ensures that text and images are displayed crisply, making it perfect for detailed presentations. The U5-532 supports multiple connectivity options, including HDMI and USB, allowing users to connect various devices effortlessly. Additionally, it features built-in speakers that deliver clear audio, eliminating the need for external sound systems.

Moving on to the U5-512, this model places a strong emphasis on portability without sacrificing performance. Weighing significantly less than its counterparts, the U5-512 is easy to transport, making it suitable for on-the-go professionals or educators. It supports wireless connectivity, allowing users to mirror their smartphone or tablet displays effortlessly. The model also includes a rechargeable battery, giving users the flexibility to present without being tethered to a power source.

Lastly, the U5-632 stands out with its enhanced brightness and superior contrast ratios. This model is perfect for environments with a lot of ambient light, as it ensures that presentations remain visible even in challenging conditions. In addition to its robust connectivity options, the U5-632 employs advanced image processing technology, which enhances the quality of images and video playback.

Across the entire U5 series, users will find intuitive control interfaces that make navigation easy. The devices come with a remote control, adding convenience for presenters who need to manage their presentations from a distance. Furthermore, the U5 models are designed with energy efficiency in mind, contributing to reduced power consumption without compromising performance.

In summary, the PLUS Vision U5-532, U5-512, and U5-632 represent a significant advancement in presentation technology, each tailored to meet specific user needs. Their blend of high-quality displays, versatility in connectivity, and user-friendly interfaces makes them exceptional tools for anyone looking to make an impact with visual communication.
Top Page Image Contents