PLUS Vision U5-532, U5-632, U5-512 user manual Cleaning a Soiled Projector Main Unit, Dirty Lens

Page 64

Cleaning

•Be certain to disconnect the power plug from the power outlet before cleaning.

•Do not spray or otherwise expose the projector, lens, or screen to volatile substances such as insecticides. Do not leave rubber or vinyl products in contact with the projector for long periods. Doing so could cause them to undergo qualitative changes or the coatings may peel, etc.

Cleaning a Soiled Projector Main Unit

•Wipe with a lint-free, soft, dry cloth.

When very dirty, wipe with a cloth that has been moistened with a diluted neutral detergent, then finish with a dry cloth. If a chemically-treated cloth is going to be used, please follow any written warnings.

•Do not wipe with thinner, benzene, or other solvents. Doing so could cause them to undergo qualitative changes or the coatings may peel, etc.

•When removing the dust of the outflow and intake holes, use the brush attachment on a vacuum cleaner to clean out the dust. Avoid using the vacuum directly without attaching the adapter as well as the use of a nozzle adapter.

•Do not scratch or otherwise hit the projector body with your nails or other hard object, since this will cause scratches.

Dirty Lens

•Clean using the same method you would use to clean a camera lens: Use a commercial blower for camera use or cleaning paper for eye glasses. Be careful not to scratch the lens at this time.

Dust of the Intake and Outflow Holes

Dust that collects in the intake and outflow holes will obstruct the ventilation and cause the internal temperature to rise which could cause damage. Clean this area carefully. As a guideline, clean at least every 100 hours of usage.

•Switch off the power, check that the STANDBY in- dicator has changed to a steadily lit amber, then

unplug the power cable.

• Clean out the holes from the outside using a vacuum cleaner. Use the brush adapter of the vacuum cleaner to do this. Avoid using the vacuum directly without attaching the adapter as well as the use of a nozzle adapter.

Cleaning the Inside of the Projector

Cleaning of the inside of the projector is required about once a year. Failure to clean over a long period while dust has collected inside the projector could cause a fire or breakdown. Do not clean the inside of the projector by yourself. Please be sure to contact your dealer.

E-63

Page 63 Page 65
Image 64
Page 63 Page 65
Contents U5-632 U5-532/U5-512 This label is located on the side of the remote control PrecautionsDo not look at the laser pointer’s light source Important Safety Information DOC Compliance NoticeInstallation Power SupplyCleaning Lamp ReplacementMajor Features Table of Contents Table of Contents Checking the Supplied Accessories Checking the Supplied Accessories Storage case for projector and accessoriesUSB cable type A, 2 m / 6.6 feet Velcro strap Pocket Cable storage pouchNames of the Main Unit Parts Applicable Projector U5-532/U5 NatsZoom ring E-26 Exhaust Vents Focus ring E-27 Lens Lens capBuilt-in Security Slot Names of the Main Unit PartsNames of Parts/Preparing the Remote Control Unit Names of the Remote Control PartsIncluded with the U5-632 Inserting the BatteriesReplacement Method Temporarily cancels the video Audio Number buttons E-37RGB button and Video button Used for the security lockSide View Remote Control RangeSide View Top View Procedure Up to Projecting to the Screen Placement Guide U5-632 Screen Size and Projection DistancePlacement Guide U5-532/U5-512 Screen Size and Projection DistancePersonal computer RGB signal cable Supplied item Connections with Personal ComputerConnecting Personal Computers and Video Equipment To Output the External Output Signal of a Notebook ComputerManufacturer Model Key Connections with Composite Signals Video Equipment with Video ConnectorsVideo Equipment with S-VIDEO Connectors → Video See Input Format on Page E-56Connections with Component Signals Component cable Available as an option Order codeGreen Blue Red Cb Cr Pb Pr Green Blue RedAudio cable Supplied item Audio conversion adapter Red Connections with the Audio JackAudio cable Supplied item Connecting Personal Computers and Video Equipment Switch on the projector power OperatingPower Cable Connections and Switching the Power On/Off Press the Enter button to setThis completes the selection of the display language CursorFinishing Unplug the power cableStandby button on main unit Adjustment of the Projection Screen Adjustment of the Projection ScreenAdjust the projection image to the screen Zoom ringMaking Adjustments with the Adjusters Adjuster buttonFocus ring Raising the projection imageAutomatic Adjustment When Auto Source is OnWhen Auto Source is Off General OperationSelection of Aspect Ratio Video Signals / Component SignalsGeneral Operation Lamp Mode Cancelling Video and Audio TemporarilyFreezing a Moving Picture Press the Cancel button to immediately close the display Adjustment of the VolumeKeystone Image can also be moved in the following circumstances Enlargement of the Image and Video MovementPress the Zoom button to enlarge the image Using the Presentation Timer Using the Laser Pointer OperationConnecting the computer and projector Click button on backJOG buttons Click buttonControlling the Projector from Computer Use as a High-Brightness Monochrome ProjectorApplicable Projector U5-632 Serial cable D-Sub 9-pin, straight commercially availableUse the number buttons 1 to 4 to register the password Example Registering the passwordProtecting the Projector with the Security Lock All four placesInput the password using the number buttons 1 to Canceling the password/Changing the passwordCanceling the password Changing the passwordUsing the Quick Menu Content of Adjustments and SettingsPress the cursor or button to make the adjustment To close the display immediately, press the Cancel buttonMenu Operation Method Menu buttonSelect buttons Enter buttonMenu Screen Names and Functions Menu Operation MethodPerforming Menu Operations Menu Display Press the Menu button to display the menuThis condition al- lows selection of the item name Making Adjustments/SettingsSub menu Selecting Another Menu Name with Remote Control Operation Color ViewMenu name Item Name Sub Menu Setup Color B/W SwitchingVideo OptionPicture Adj. Picture Adjustment ImageBrightness / Contrast / Color / Tint / Sharpness Picture Adj. / Fine Picture / H Position / V PositionReset Press of the Enter button forces the resetFine Picture PositionSelect the preset color mode ColorQuick Color Adj GammaSelection contents at the time of YPbPr input Color TempWhite Color SpaceWhite Balance Video Signals ViewAspect FilterPower cable has been unplugged Vertical FlipKeystone Save ViewSetup Color B/W SwitchingAuto Power Off Auto SourceSetup Status indicator is greenStatus indicator is off Menu PositionPresentation Timer To start the timerInput Format Video and S-VideoOption LanguageOn Screen BackgroundSecurity Lock Startup ScreenOption Factory Default Lamp Timer ResetInfo StatusLamp Timer Resolution / FrequencyInfo When an Indicator is Lit or Flashing Thermal ProtectorTroubleshooting Check the following matters before requesting servicingCleaning Cleaning a Soiled Projector Main UnitCleaning the Inside of the Projector Dirty LensReplacing the Lamp Cartridge Replacing the Lamp Cartridge Remove the lamp cartridgeMount the new lamp cartridge Reset the Lamp TimerMount the lamp cover Specifications OpticalElectrical MechanicalSpecifications Model U5-532/U5-512U5-532 U5-512Signal Resolution Frequency VideoTable of Supported Frequency U5-632/U5-532Cabinet Dimensions 216240 216 Unit mm inch2005

U5-512, U5-532, U5-632 specifications

The PLUS Vision U5 series includes three impressive models: the U5-532, U5-512, and U5-632. Each model is designed with advanced features and technologies geared towards enhancing visual presentations, making them ideal for business, education, and personal use.

Starting with the U5-532, this model is equipped with a high-resolution display that provides stunning clarity and vibrant colors. Its native resolution ensures that text and images are displayed crisply, making it perfect for detailed presentations. The U5-532 supports multiple connectivity options, including HDMI and USB, allowing users to connect various devices effortlessly. Additionally, it features built-in speakers that deliver clear audio, eliminating the need for external sound systems.

Moving on to the U5-512, this model places a strong emphasis on portability without sacrificing performance. Weighing significantly less than its counterparts, the U5-512 is easy to transport, making it suitable for on-the-go professionals or educators. It supports wireless connectivity, allowing users to mirror their smartphone or tablet displays effortlessly. The model also includes a rechargeable battery, giving users the flexibility to present without being tethered to a power source.

Lastly, the U5-632 stands out with its enhanced brightness and superior contrast ratios. This model is perfect for environments with a lot of ambient light, as it ensures that presentations remain visible even in challenging conditions. In addition to its robust connectivity options, the U5-632 employs advanced image processing technology, which enhances the quality of images and video playback.

Across the entire U5 series, users will find intuitive control interfaces that make navigation easy. The devices come with a remote control, adding convenience for presenters who need to manage their presentations from a distance. Furthermore, the U5 models are designed with energy efficiency in mind, contributing to reduced power consumption without compromising performance.

In summary, the PLUS Vision U5-532, U5-512, and U5-632 represent a significant advancement in presentation technology, each tailored to meet specific user needs. Their blend of high-quality displays, versatility in connectivity, and user-friendly interfaces makes them exceptional tools for anyone looking to make an impact with visual communication.
Top Page Image Contents