Onkyo TX-NR808 instruction manual Input/Output Assign, Monitor Out, OUT Main

Explanatory Notes
a	Main Menu	Speaker Setup

b■ Subwoofer

c `Yes:

Select if a subwoofer is connected.

`No:

Select if no subwoofer is connected.

aMenu selection

bSetting target

cSetting options (default setting underlined)

Input/Output Assign

Main Menu Input/Output Assign

Monitor Out

If you connect your TV to HDMI output, “Monitor Out” setting is automatically set so that the onscreen setup menus are displayed and composite video, S-Video, and component video sources are upconverted* and output.

Composite video, S-Video,
component video	HDMI
IN
OUT
Composite video, S-Video,	HDMI
component video

On the “Monitor Out” settings, you can select whether or not to have the video sources’ images output through the HDMI output, as well as whether to have the onscreen setup menu output through the HDMI output or through an analog output.

If you connect your TV to the COMPONENT VIDEO MONITOR OUT (not the HDMI output), “Monitor Out” setting is automatically set so that the onscreen setup menus are displayed and composite video and S-Video sources are upconverted* and output.

Composite video, S-Video	Component video
IN
OUT
Composite video, S-Video	Component video

Note

•You can specify the output resolution for the HDMI output and

COMPONENT VIDEO MONITOR OUT and have the AV receiver upconvert the picture resolution as necessary to match the resolution supported by your TV (➔ 42).

•See “Video Connection Formats” (➔ 22) for charts showing how the “Monitor Out” and “Resolution” settings (➔ 43) affect the video signal flow through the AV receiver.

■Monitor Out

(North American and Taiwan models)

`Analog:

Select this if your TV is connected to the COMPO-

NENT VIDEO MONITOR OUT, MONITOR OUT S, or MONITOR OUT V.

`HDMI:

Select this if your TV is connected to the HDMI

OUT.

(European, Australian and Asian models)

`Analog:

Select this if your TV is connected to the COMPO-

NENT VIDEO MONITOR OUT, MONITOR OUT S, or MONITOR OUT V.

`HDMI Main:

Select this if your TV is connected to the HDMI

OUT MAIN.

`HDMI Sub:

Select this if your TV is connected to the HDMI OUT SUB.

`Both:

Select this if your TVs are connected to the HDMI OUT MAIN and HDMI OUT SUB. Video signals are output from both HDMI outputs at the resolution supported by both TVs.

`Both(Main):

Select this if your TVs are connected to the HDMI OUT MAIN and HDMI OUT SUB. Video signals are output from both HDMI outputs but HDMI OUT MAIN will become a priority; depending on the reso- lution, video signals may not be output from HDMI OUT SUB.

`Both(Sub):

Select this if your TVs are connected to the HDMI OUT MAIN and HDMI OUT SUB. Video signals are output from both HDMI outputs but HDMI OUT SUB will become a priority; depending on the reso- lution, video signals may not be output from HDMI

OUT MAIN.

En

42