Onkyo TX-NR808 Component Video Input, BD/DVD, VCR/DVR, CBL/SAT, GAME, PC TV/CD, PHONO, Port

Here are the default assignments.

Input selector	Default assignment
BD/DVD	HDMI1
VCR/DVR	HDMI2
CBL/SAT	HDMI3
GAME	HDMI4
PC	HDMI5
AUX	FRONT (Fixed)
TUNER	- - - - - (Fixed)
TV/CD	- - - - -
PHONO	- - - - -
PORT	- - - - -

■BD/DVD, VCR/DVR, CBL/SAT, GAME, PC,

TV/CD, PHONO, PORT

`HDMI1, HDMI2, HDMI3, HDMI4, HDMI5, HDMI6:

Select the HDMI IN to which the video component has been connected.

`- - - - -:

Output composite video, S-Video, and component video sources from the HDMI output. The video out- put signal from the HDMI output is the one config- ured in “Component Video Input” (➔ 44).

•“AUX” is used only for input from the front panel.

•Each HDMI input cannot be assigned to two input selec- tors or more. When HDMI1 - HDMI6 have already been assigned, you must set first any unused input selec- tors to “- - - - -” or you will be unable to assign HDMI1 - HDMI6 to input selector.

Note

•For composite video, S-Video, and component video upconver- sion for the HDMI output, the “Monitor Out” setting must be set to other than “Analog” (➔ 42), and the “HDMI Input” set- ting must be set to “- - - - -”. See “Video Connection Formats” for more information on video signal flow and upconversion (➔ 22).

•If no video component is connected to HDMI output (even if the HDMI input is assigned), the AV receiver selects the video source based on the setting of “Component Video Input”.

•When an HDMI IN is assigned to an input selector as explained here, the same HDMI IN will be set as a priority in the “Digital Audio Input” (➔ 45). In this case, if you want to use the coaxial or optical audio input, make the selection in the Audio Selector in the Home menu (➔ 26).

•“TUNER” selector cannot be assigned and is fixed at the “- - - - -” option.

•If you connect a component (such as UP-A1 Dock that seated iPod) to UNIVERSAL PORT jack, you cannot assign any input to “PORT” selector.

•Do not assign the component connected with the HDMI input to “TV/CD” selector when you set “TV Control” setting to “On” (➔ 57). Otherwise, appropriate CEC (Consumer Electronics Control) operation will not be guaranteed.

En

44

Component Video Input

If you connect a video component to a component video input, you must assign that input to an input selector. For example, if you connect your Blu-ray Disc/DVD player to COMPONENT VIDEO IN 2, you must assign “IN2” to the “BD/DVD” input selector.

If you’ve connected your TV to the AV receiver with a component video cable, you can set the AV receiver so that composite video and S-Video sources are upcon- verted* and output by the COMPONENT VIDEO MONI- TOR OUT*1. You can set this for each input selector by selecting the “- - - - -” option.

*1 Only when “Monitor Out” setting is set to “Analog” (➔ 42).

Composite video, S-Video	Component video
IN
OUT
Composite video, S-Video	Component video
Here are the default assignments.
Input selector	Default assignment
BD/DVD	IN1
VCR/DVR	- - - - -
CBL/SAT	IN2
GAME	- - - - -
PC	- - - - -
AUX	- - - - -
TUNER	- - - - - (Fixed)
TV/CD	- - - - -
PHONO	- - - - -
PORT	- - - - -

■BD/DVD, VCR/DVR, CBL/SAT, GAME, PC, AUX,

TV/CD, PHONO, PORT

`IN1, IN2:

Select a corresponding component video input that the video component has been connected.

`- - - - -:

Select if you are using HDMI output, rather than the COMPONENT VIDEO MONITOR OUT, for the output from composite video, S-Video,and compo- nent video sources.

Note

•For composite video and S-Video upconversion for the COM- PONENT VIDEO MONITOR OUT, the “Monitor Out” set- ting must be set to “Analog” (➔ 42), and the “Component Video Input” setting must be set to “- - - - -”. See “Video Con- nection Formats” for more information on video signal flow and upconversion (➔ 22).

•(North American and Taiwan models) If not connected to

HDMI OUT, the “Monitor Out” setting will be automatically switched to “Analog”.

(European, Australian and Asian models) If not connected to the same output you have selected in the “Monitor Out” setting, the “Monitor Out” setting will be automatically switched to “Analog” (➔ 42).

•If you connect a component (such as UP-A1 Dock that seated iPod) to the UNIVERSAL PORT jack, you cannot assign any input to “PORT” selector.