Onkyo TX-NR808 instruction manual About USB, USB Mass Storage Device Requirements

Page 68

■Proxy Port

If you’re using a Web proxy, enter a proxy port number here.

■Control

This setting enables or disables control over the network.

`Enable:

Control over the network enabled.

`Disable:

Control over the network disabled.

Note

•When set to “Enable”, power consumption on standby mode slightly increases.

■Port Number

This is the network port used for control over the network.

Note

• Set the port number between from “49152” to “65535”.

About USB

USB can be used to play music files stored on USB mass storage devices (e.g., USB flash drives and MP3 players), which can be plugged into the AV receiver’s USB port.

Supported Audio File Formats

For USB mass storage device playback, the AV receiver supports music file formats.

See “Supported Audio File Formats” (➔ 64).

USB Mass Storage Device Requirements

•The AV receiver supports USB devices that support the USB mass storage device class.

•Playback may not be possible with some USB devices even if they conform to the USB mass storage device class.

•USB devices formatted with the FAT16 or FAT32 file system are supported.

•If the storage device has been partitioned, each section will be treated as an independent device.

•Each folder may contain up to 20000 music files and folders, and folders may be nested up to 16 levels deep.

•USB hubs and USB devices with hub functions are not supported.

Playing Music Files on a USB Device

This section explains how to play music files on a USB mass storage device.

DISPLAY

NET/USB

ENTER q/w/e/r

RETURN

1, 3, 2, 5, 4, 7, 6

REPEAT

RANDOM

En

68

Page 67 Page 69
Image 68
Page 67 Page 69
Contents TX-NR808 Always consider the environmental issues and follow 10 cm 4 at the rear. The rear edge of the shelf orBoard above the apparatus shall be set 10 cm Away from the rear panel or wall, creating a flue-likePrecautions Supplied Accessories Using the Remote ControllerInstalling the Batteries Aiming the Remote ControllerContents Features AmplifierProcessing MiscellaneousTHX Select2 Plus Amplifier is prohibitedSAT , Game , PC , AUX , Tuner , TV/CD , Phono Front & Rear PanelsFront Panel Return button Setup MIC jack DisplayPhones jack Zone 2, Zone 3 and OFF buttons AUX Input jacks HDMI, VIDEO, Audio L/R and Digital 18Rear Panel Hdmi in and Hdmi output Hdmi OUT MainFront L/R, CENTER, Surr L/R SB/FH/FW L/R, SUBWOOFER, Zone 2 L/R and Zone 3 L/RRemote Controller Controlling the AV ReceiverAbout Home Theater Enjoying Home TheaterConnecting the AV Receiver Connecting Your SpeakersSpeaker Configuration Speaker Connection PrecautionsConnecting the Speaker Cables Screw-type speaker terminals Strip 1/2 to 5/8 12 to 15 mmBi-amping the Front Speakers Using Dipole SpeakersConnecting a Powered Subwoofer Powered subwoofer Connecting a Power AmplifierPower amplifier About AV Connections Connected image with AV componentsAV Cables and Jacks Hdmi cableAudio return channel ARC function Connecting Your Components with HdmiJack Signal Components Assignable Connecting Your Components Front RearConnecting Onkyo uComponents How to record the videoRemote Control StepConnecting Antenna Connecting the Power CordNorth American Taiwan models Asian modelsWhich Connections Should I Use? Video Connection FormatsReceiver’s Hdmi OUT Main and Hdmi OUT SUB to your TVsMonitor Out setting set to Analog Use this setting if you connect the AV receiver’s CompoVideo Signal Flow and the Resolution Setting Audio Connection FormatsStandby indicator Turning On/Off the AV ReceiverTurning On Turning OffSelecting the Language Used for the Onscreen Setup Menus Setting the Display BrightnessBasic Operations Playing the Connected ComponentSelecting Speaker Layout Muting the AV Receiver Using the Home MenuUsing the Sleep Timer Using Headphones Using Easy MacrosChanging the Input Display Press MY MOVIE, MY TV, or MY MusicAudyssey MultEQ Room Correction and Speaker Setup Restoring DefaultUsing Audyssey MultEQ Turning Off the ComponentsEnter Using a Powered Subwoofer Error MessagesChanging the Speaker Settings Manually Using the Tuner Tuning into Radio StationsListening to the Radio Listening to the RadioPresetting FM/AM Stations Using RDS excluding North American and Taiwan modelsRDS program types PTY Finding Stations by Type PTYListening to Traffic News TP Connecting a Recording Component RecordingRecording Separate AV Sources AV RecordingSelecting Listening Modes Using the Listening ModesListening Mode Buttons About Listening Modes Explanatory NotesInput Source Speaker LayoutListening Modes DTS-HD Master AudioDTS Express DSD *6Listening Mode Description Input Speaker Source Layout Onkyo-Original DSP Listening Modes Advanced Setup On-screen Setup MenusCommon Procedures in Setup Menu MenuInput/Output Assign Monitor OutOUT OUT MainHdmi Input Changing Monitor Out setting manuallyResolution Here are the default assignments Component Video InputBD/DVD, VCR/DVR, CBL/SAT, GAME, PC TV/CD, PHONO, Port BD/DVD, VCR/DVR, CBL/SAT, GAME, PC, AUX TV/CD, PHONO, PortSpeaker Setup Speaker SettingsDigital Audio Input Analog Audio InputSpeaker Distance Equalizer Settings Level CalibrationSubwoofer*1 EqualizerTHX Audio Setup BGCDolby Audio AdjustMultiplex/Mono Source Setup Theater-DimensionalAudyssey DSX LFE LevelDynamic Volume Reference LevelName Edit IntelliVolumeSync Picture Adjust Listening Mode Preset Hardware Setup MiscellaneousSirius Settings North American models TunerNetwork Auto Power DownFirmware Update Lock Setup Using the Audio SettingsTone Control Settings Audyssey SettingsMusic Optimizer Late NightRe-EQ Audio Selector Setting the Incoming Digital Signal Fixed ModeAudio Selector Network Requirements Connecting the AV ReceiverAbout NET Listening to Internet Radio Listening to vTuner Internet RadioListening to Other Internet Radio Playback starts and the following screen appearsRegistering Presets*1 Station and Song PresetsPlaying Music Files on a Server Items on the Internet Radio Top MenuWindows Media Player 11 Setup Supported Audio File FormatsMP3 WMAServer Requirements About DlnaWAV AACWindows Media Player 12 Setup Using Remote PlaybackRemote Playback from Media Server/ Personal Computer Supported Music File FormatsNetwork Settings DhcpPlaying Music Files on a USB Device About USBUSB Mass Storage Device Requirements Plug your USB mass storage device into the AV Receiver’s USB portPress NET/USB repeatedly to select the USB InputConnecting Zone Connecting Your Zone 2 Speakers Directly to the AV receiverConnecting Your Zone 2 Speakers to an Amp in Zone Multi ZoneConnecting Zone Setting the Powered Zone Connecting Your Zone 3 Speakers to an Amp in ZoneZone 3 12V Trigger Use Front WIDE/ZONE 2 L/R terminals toControlling Zone 2/3 from the AV receiver Setting the Multi ZoneUsing Zone 2/3 Controlling Zone 2/3 with the Remote Controller Adjusting the Volume for ZonesAdjusting the Tone and Balance of Zones Muting ZonesUsing a Multiroom Kit with Other Components Using a Multiroom Kit with Zone 2/3Using a Multiroom Kit with a Cabinet Standard Mode control Extended Mode controlPlaying Music Files on the iPod/iPhone Top screen listOnkyo Dock Cable Connecting an Onkyo DockModels sold are different depending on the region Using the Onkyo Dock UP-A1 DockControlling Your iPod RI DockWithout the RI Control With the RI ControlAvailable buttons Onkyo Dock Buttons UP-A1 DockUDock E/rENTER PLAYLISTe/rControlling Other Components Preprogrammed Remote Control CodesLooking up for Remote Control Code AV receiver accesses and searches Network , and then press ENTER. When youSkip when you don’t want to select Use qw/ to select the brand name, and thenEntering Remote Control Codes Remote Control Codes for Onkyo Components Connected via uRemote Mode BD/DVD TV/CDResetting Remote Mode Buttons Resetting the Remote ControllerYou can reset the remote controller to its default settings Controlling Other ComponentsComponents Buttons Cassettetape deckTV VOL q/w Number +10Activities Setup Message for transfer will appear Learning CommandsTo learn more commands, repeat steps 2 Using Normal Macros Deleting Learning CommandsMaking Macros Running MacrosTroubleshooting Standby indicator flashes redThere’s no sound, or it’s very quiet Can’t turn on the AV receiverThere’s no sound with a certain signal format About DTS signalsCan’t select the Pure Audio listening mode Only the center speaker produces soundRemote controller doesn’t work There’s no pictureThere’s no picture from a source connected to an Hdmi On-screen menus don’t appearCan’t learn commands from another remote controller Can’t access the server or Internet radioCan’t access the music files on a USB device Stand-by power consumptionNent Video Monitor OUT Ufunctions don’t workCBL/SAT, GAME, or AUX input Specifications Amplifier Section Tuner SectionGeneral Video SectionAudio Outputs OthersAbout Copyright Protection About HdmiSupported Audio Formats Operations that can be performed with p connection Using an RIHD-compatible TV, Player, or RecorderAbout p-compatible components How to connect and setup Confirm the connecting and settingConfirm the settings Operate with the remote controllerOutput Video Resolution ChartOutput Memo Onkyo Europe Electronics GmbH Onkyo Europe Electronics GmbH UK Branch

TX-NR808 specifications

The Onkyo TX-NR808 is a versatile and powerful AV receiver designed to cater to both audiophiles and home theater enthusiasts. This advanced receiver features a robust 7.2 channel configuration, delivering an impressive 130 watts per channel, providing high-quality sound for any audio content. The TX-NR808 is equipped with a variety of modern technologies that enhance the overall listening experience.

One of the standout features of the TX-NR808 is its compatibility with various surround sound formats. It supports Dolby TrueHD and DTS-HD Master Audio, ensuring that high-definition Blu-ray audio is reproduced with maximum fidelity. The receiver also offers Dolby Pro Logic IIz, which adds an extra dimension to your audio with overhead sound, providing a more immersive experience.

The TX-NR808 incorporates the latest HDMI specifications, featuring six HDMI inputs and two outputs, allowing for seamless switching between multiple devices such as gaming consoles, Blu-ray players, and streaming devices. This receiver supports 3D video and 4K pass-through, making it a future-proof choice for those looking to integrate the latest technology into their home theater systems.

For music lovers, the Onkyo TX-NR808 includes network streaming capabilities, allowing users to access music from online services such as Spotify and Pandora. With built-in Wi-Fi and Ethernet connectivity, users can stream high-definition audio directly from their devices. Additionally, the receiver supports playback of high-resolution audio formats, including FLAC, DSD, and WAV, ensuring that every note and nuance is preserved.

Another notable feature is the incorporation of the Audyssey MultEQ technologies. This system automatically calibrates the speakers to the room's acoustics, optimizing the sound quality based on the specific environment. The TX-NR808 also includes Audyssey Dynamic EQ, which maintains sound clarity at lower volume levels.

In addition to its impressive audio capabilities, the Onkyo TX-NR808 is designed with practicality in mind. Its graphical user interface is user-friendly, making setup and navigation a breeze. The sleek and modern design ensures that it can fit seamlessly into any home entertainment setup.

Overall, the Onkyo TX-NR808 is a powerhouse of an AV receiver that combines cutting-edge technology with user-friendly features. Whether for movies, music, or gaming, this receiver is engineered to elevate your audio-visual experience to new heights, making it a worthy investment for any home theater enthusiast.
Top Page Image Contents