MW1122 User Manual
3.1.4WLAN Clients page
On the WLAN Clients page you can enable access control based on the MAC addresses of your wireless LAN clients. When access control is enabled, only the wireless stations on the Client table are allowed access to your wireless network. On this page, you can also activate Wired Equivalent Privacy (WEP) and set the encryption key parameters. Note, that unless you have encryption enabled other WLAN clients nearby have the possibility of monitoring the traffic on your wireless network
Figure 7 WLAN Clients page
Enabling access control
You can add a wireless station to the Client table by typing its MAC address to the MAC address field and clicking the Add new button. Use
10 | E Copyright Nokia Networks Oy | C33902002SE_00 |