MW1122 User Manual
3.1.9Save Config page
When you change the configuration, all configuration changes are activated immediately without restart/reload. However, the configuration will not be saved into the nonvolatile memory. If MW1122 is restarted or powered down without saving the configuration, the old configuration will be restored. Clicking the Save configuration button saves the configuration into the nonvolatile memory and the old configuration cannot be restored through the web interface.
Figure 18 Save Config page
4 Features
MW1122 can operate as a bridge and/or Internet Protocol (IP) router between Ethernet, wireless LAN and the virtual channels of ADSL/ATM interfaces supporting both dynamic and static routing.
4.1Interfaces
MW1122 has the following interfaces:
DEthernet interface (LAN)
DWireless LAN interface (WLAN)
D8 ATM VCC interfaces
DATM VCC management interface
24 | E Copyright Nokia Networks Oy | C33902002SE_00 |