3.1.6Local Network pages
The Local Network page as four sub pages: Local ports, DHCP, NAPT, and Routing.
Local ports
On the Local Network Local Ports sub page you can assign IP addresses to Ethernet and wireless LAN ports. If you set Physical LAN interfaces as Single subnet, you don’t have to set the IP address and subnet mask to the WLAN port. Instead, the Ethernet IP address is used for both LAN ports (WLAN slaved to LAN).
Note
When you click Apply, the IP addresses are changed immediately. If the IP address of the interface you are using changes the connection will be lost. You have to reconfigure the IP address of the accessing host. For example, in Windows programs winipcfg.exe or ipconfig.exe must be used first to release the old address and then to renew to request new address.
Figure 12 Local Network Local Ports page
C33902002SE_00 | E Copyright Nokia Networks Oy | 17 |