Nokia T66520 user manual Configuring MW1122

7.Connect the 6-pin ADSL line cable between the ADSL connector on the MW1122 back panel and your ADSL line wall socket. If you want to use telephone and data services simultaneously connect a splitter according to Figure 4. After a while, the DSL indicator starts blinking indicating that the ADSL connection is being established. After the connection has been established successfully the DSL indicator remains lit.

splitter

Figure 4 MW1122 and splitter connected

Now, your MW1122 has been connected and you can check the connections according to your service provider’s instructions.

3 Configuring MW1122

Your service provider has configured your MW1122 for the service. However, you may want to change the settings regarding your wireless network. You will find these settings on the Wireless LAN and WLAN Clients web pages. Do not change other settings unless specifically asked by your service provider. You can change MW1122 settings with an ordinary web browser such as Microsoft Internet Explorer or Netscape Navigator.

If the WLAN indicator is lit on the MW1122 front panel, you can use your WLAN client for configuration. Of course, you can also use a PC

C33902002SE_00 E Copyright Nokia Networks Oy 5