Onkyo Audio Selector button, Pure Audio button and indicator TX-SR700/700E only 49

Page 10

Front panel facilities

Input source buttons (DVD, VIDEO 1–4, TAPE, TUNER, PHONO (TX-SR700/700E only), and CD) [44, 45, 53]

TX-SR600/600E:

These buttons are used to select the input source.

TX-SR700/700E:

Press these buttons to select the input source for the main zone.

To select the input source for the remote zone (Zone 2) or recording out (Rec Out), first press the ZONE 2 or REC OUT button, and then press the desired input source button. The input channel with its indicator lit red is output to REC OUT and the one with its indicator lit green is output to ZONE 2.

AUDIO SELECTOR button [47]

Press to select the type of audio input signal.

PURE AUDIO button and indicator (TX-SR700/700E only) [49, 51]

Press to select the Pure Audio mode.

The PURE AUDIO indicator lights during pure audio playback.

PHONES jack [47]

This is a standard stereo jack for connecting stereo headphones.

REC OUT, ZONE 2, OFF, LEVEL / buttons, and ZONE 2 indicator (TX-SR700/700E only) [60, 61]

The REC OUT and ZONE 2 buttons allow you to use the TX-SR700/ 700E to output to a remote zone (Zone 2) or to another component for recording (Rec Out). Press the REC OUT button to output the audio and video signals to a recording component for recording. Press the ZONE 2 button to enjoy the output from the TX-SR700/ 700E in a different room, which is referred to as the remote zone (Zone 2). When either button is pressed, the currently selected input source for recording or outputting to the remote zone is displayed in the front panel display. If “SOURCE” is displayed, then the same input source as that selected for the main zone will be output.

To select an input source, press the desired button (REC OUT or ZONE 2) and then press one of the input source button within 5 seconds. That source will be output for recording or viewing in the remote zone.

To set the output to the source channel, press the desired button (REC OUT or ZONE 2) twice in succession. To turn off the output, press the OFF button. The ZONE 2 indicator lights when a signal is output to the remote zone (Zone 2). When the ZONE 2 indicator is off, then either output to the remote zone is turned off or Rec Out is selected. Press the LEVEL / buttons to enter the mode for adjusting the volume in the remote zone (Zone 2).

Note:

The Rec Out and Zone 2 buttons use the same circuit and therefore cannot be used at the same time. When REC OUT is selected, nothing is output to Zone 2. When ZONE 2 is selected, REC OUT is automatically fixed to SOURCE.

SPEAKERS A/B buttons (TX-SR600/600E only) [45]

Press these buttons to turn on and off speakers systems A and B.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents TX-SR700/700E TX-SR600/600E Important Safeguards AvisPrecautions Contents Contents Features TX-SR700/700E Amplifier FeaturesSetting the voltage selector Worldwide models only Supplied accessoriesBefore using this unit Using the remote controllerFront panel facilities TX-SR700E TX-SR600ETuning Front panel facilitiesPhones jack Pure Audio button and indicator TX-SR700/700E only 49Audio Selector button Speakers A/B buttons TX-SR600/600E onlyTuning indicators Muting indicatorListening mode or digital input format indicators Sleep indicatorRemote controller Remote controller Connections Connections Signal flow Connecting your audio componentsConnecting a compact disc player CD Connections TX-SR700/700EConnecting a DVD Player with 5.1-Channel Output Connecting your video componentsFlow of the video signals is as follows Connecting a DVD Player with 2-Channel L/R Audio Output Connecting a DVD player DVDConnecting a video cassette recorder Video Connecting a television monitor or projector Monitor OUT Monitor OUT12V Trigger Zone 2 terminal Connecting video camera, etc. Video 4 InputPower amplifier Front right speakerFrom connecting block When using the Zone 2 Speakers terminals Connecting the remote zone Zone 2 speakersWhen using the Zone 2 PRE OUT terminals TX-SR700/700E onlyConnections TX-SR600/600E Video 3 Video White Analog audio output Red Digital audio output coaxial Satellite tuner or television Video 2/3 OUT Front panelConnections TX-SR700/700E/600/600E Power on/ready functionPower off function Direct change functionMinimum speaker configuration for surround sound playback Connecting speakersStandard speaker setup for surround sound Speaker placementConnecting a subwoofer Connecting speakersConnecting speakers Connecting the speaker cableSubwoofer Surround Front Center Right Speaker LeftRight Back Left Speaker Turning on the power Connecting the powerTurning on the power from the remote controller Connecting the AM antenna cable Connecting antennasConnecting the included antennas Assembling the AM loop antennaConnecting an AM outdoor antenna Connecting antennasConnecting an FM outdoor antenna Directional linkageReturn Setup Enter Configuring the speakersSpeaker Configuration Displaying the Main MenuConfiguring the speakers Adjustable Crossover 80/100/120 Hz for Bass ManagementMain menu and then press the Enter button Calibrating the speaker levelsUse the and cursor buttons to select Left Buttons used for navigating through the menus Using the remote controller Press the Test buttonPress the Test button to complete the procedure Displaying the Main Menu and exiting the menuFM Mode Tuner Tuning Listening to a stereo radio station FM modeTuning into a radio station Listening to Radio BroadcastsErasing a preset radio station Presetting a radio stationSelecting a preset radio station Listening to Radio BroadcastsListening to RDS broadcasts What is RDS?Listening to RDS broadcasts European models only PTY program types in EuropePerforming a PTY scan Listening to RDS broadcastsDisplaying Radio Text RT Performing a TP scanBasic operation TX-SR700/700E Master VolumeSelecting an Audio Component ModeBasic operation TX-SR600/600E Speakers A/B Rcvr ModeSelecting an Audio Component Selecting speakers Speakers A, B TX-SR600/ 600E onlyTo change the display of the input source from Tape to MD Selecting the type of audio input signalTemporarily changing the speaker output levels CH SEL Audio SEL Level TAP Tape Audio SelectorEnjoying DVD multichannel audio playback Using the sleep time remote controller onlyListening with headphones TX-SR700/700E onlySwitching the display Temporarily turning off the soundListening Modes Listening Modes Cine Fltr Selecting a listening modeTip While playing back Dolby Digital 2-channel sourcesPress the Cine Fltr button on the remote controller Original filter CinemaFILTER loading for moviesMenu Return Input SetupSetup Digital InputDigital Format Input SetupIntelliVolume MultichannelPCM fs96kHz Source Relationship between input source and listening modeAnalog/PCM Source Digital Format SourceTo display the OSD Setup menu OSD Setup and Other SettingsOSD Setup PreferenceSetting Values Initial value Audio AdjustSetup Procedure Press the Audio Adjust button Bass, TrebleAudio Adjust Settings possible for each listening mode NightEnjoying music in the remote zone TX-SR700/700E only Using the buttons on the TX-SR700/700EAdjusting the volume for the remote zone Zone Level Standby Sleep OFFREC OUT Recording a source TX-SR700/700EStart recording at the recording component as desired Recording a source TX-SR600/600E Rcvr Mode VOL Using remote controllerCalling up a preset radio station Rcvr Mode VOL MutingPress the CD Mode button Using remote controllerOn Standby CD Mode Disc Controlling an Onkyo CD playerSearch Press the DVD Mode buttonControlling an Onkyo DVD player DVD operation buttons Numeric keysTV Mode TV VCR Mode VCR VOL Muting VCR and TV Mode buttonsOn Standby MD Mode Controlling an Onkyo MD recorderLearning a pre-programming code When entering the code of Onkyo DVD playersEntering a pre-programming code DisplayDVD Entering a pre-programming codePre-programming codes VCRVCR Mode VCR Mode Operating your programmed remote controllerDVD Mode DVD Player Mode TV Mode TV ModeLight Programming procedureMacro 1 Macro Page Press and release the same Mode button again Erasing the programmed command from one buttonErasing all the commands programmed under a Mode button Press and release the same button againProgramming the macro Using the macro functionMacro 1 Rcvr Mode CD Mode Executing the macroErasing a macro from the Macro 1 or 2 button Using the macro functionErasing all commands and macros that have been programmed Press the Macro 1 or 2 button againMacro mode programming memo Troubleshooting guide Troubleshooting guide Video and AudioIf one of the messages shown below appears Specifications TX-SR700/700E Amplifier Section Tuner SectionSpecifications TX-SR600/600E Onkyo Europe Electronics GmbH

TX-SR600/600E, TX-SR700/700E specifications

The Onkyo TX-SR700/700E and TX-SR600/600E are renowned audio/video receivers that have significantly enriched the home theater experience since their release. These models exemplify Onkyo’s dedication to high-fidelity sound and advanced technology, making them a favorite among audiophiles and home theater enthusiasts alike.

A standout feature of the TX-SR700/700E is its exceptional audio performance. It boasts a powerful amplification system, providing 100 watts per channel, ensuring immersive sound that fills the room. Additionally, the receiver supports a variety of surround sound formats, including Dolby Digital, DTS, and Dolby Pro Logic II, allowing users to enjoy their favorite movies, music, and games with impressive clarity and depth.

The TX-SR600/600E, while slightly more compact, still delivers remarkable audio performance. With comparable power, this model maintains high-quality sound output and supports a range of listening modes. Both receivers feature Onkyo's proprietary Wide Range Amplification Technology (WRAT), which enhances dynamic sound reproduction while minimizing distortion, ensuring that even the most delicate audio details are preserved.

Connectivity is another strong point for these models. The TX-SR700/700E and TX-SR600/600E come equipped with a variety of HDMI inputs, allowing seamless integration with modern devices. This feature supports high-definition video and audio transmission, making it easy to connect Blu-ray players, gaming consoles, and streaming devices. Furthermore, the receivers are compatible with older technologies, providing versatility for various home entertainment setups.

One notable characteristic of both models is their robust video processing capabilities. They support up to 1080p video resolution and include advanced scaling features, ensuring that standard-definition content looks stunningly sharp on high-definition displays. Additionally, the user-friendly interface and remote control simplify operation, making it easy for users to navigate settings and adjust audio/video parameters quickly.

The TX-SR700/700E and TX-SR600/600E also incorporate advanced digital technologies such as Audyssey MultEQ, which automatically calibrates the audio settings based on room acoustics, providing an optimized listening experience. This feature is crucial in achieving balanced sound in any room environment.

In conclusion, the Onkyo TX-SR700/700E and TX-SR600/600E are exemplary models that combine power, flexibility, and advanced technology. With their rich sound quality, extensive connectivity options, and user-friendly features, these receivers remain a worthwhile investment for anyone looking to enhance their home theater system. Whether for movie nights, gaming, or casual listening, these Onkyo receivers are poised to deliver an unforgettable audio experience.
Top Page Image Contents