Onkyo TX-SR600/600E, TX-SR700/700E instruction manual Remote controller

Page 13

Remote controller

INPUT SELECTOR buttons [44, 45, 53]

Press to select an input source.

Same as the input selector buttons on the front panel of the TX- SR700/700E/600/600E. The input source for each button is given here. DVD:DVD, CD:CD, V1:VIDEO1, V2:VIDEO2, V3:VIDEO3, V4:VIDEO4, V5:VIDEO5 (not used with the TX- SR700/700E/600/600E), TAP:TAPE, TUN:FM/AM, PH:PHONO (not used with the TX-SR600/600E).

Numeric key/Listening mode, SP A, SP B, CINE FLTR, DISPLAY, DIMMER buttons

1 to 9, +10, --/---, 0: For entering the number of a track. [64-66]

PURE A:

TX-SR600/600E:Not used with the TX-SR600/600E.

TX-SR700/700E:Press to select the Pure Audio mode. [51]

DIRECT, STEREO, SURR, ALL ST, DSP: You can select a listening mode. [51]

Note:

During playback of a multichannel source, press the DIRECT button to turn off the tone control and the SURR button to turn on the tone control.

SP A, SP B:

TX-SR600/600E:Switches between speakers A and B.

TX-SR700/700E:Not used with the TX-SR700/700E.

CINE FLTR: Depending on the listening mode, you can turn the CinemaFILTER function on or off. [52]

DISPLAY: For changing the display in the front display. [48]

DIMMER: Adjusts the display brightness.

There are three settings available: normal, dark, and very dark.

LIGHT button (RC-482M only)

Press to turn on and off the lights in the buttons of the remote controller.

SETUP button [36]

Press to display the Setup Menu on the TV screen and in the display. Press again to exit the menu.

///, ENTER button [36]

When in the Setup Menu, press the upper and lower arrow buttons to select an item, press the right and left arrow buttons to select parameter values or modes, and press the ENTER button to advance to the next item.

VOL button [44, 45]

Press to adjust the volume.

TEST/MENU button

This button is used to set the speaker output levels. Use this button in conjunction with the LEVEL / and CH SEL buttons to calibrate the speakers levels without entering the Setup Menu. [39]

When the DVD mode is selected, press to display the DVD menu (MENU). [65]

MUTING button [48]

Press to activate the mute function.

ZONE 2/SEARCH/ENTER button

When the DVD mode is selected, press to find the specific section on a DVD where you want to start playback (SEARCH). [65]

When in the RCVR mode, press to perform operations on the remote zone (ZONE 2) (not used with the TX-SR600/600E). [60]

When in the MD mode, press to enter the selected song (ENTER). [66]

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents TX-SR700/700E TX-SR600/600E Avis Important SafeguardsPrecautions Contents Contents TX-SR700/700E Amplifier Features FeaturesBefore using this unit Supplied accessoriesSetting the voltage selector Worldwide models only Using the remote controllerTX-SR700E TX-SR600E Front panel facilitiesFront panel facilities TuningAudio Selector button Pure Audio button and indicator TX-SR700/700E only 49Phones jack Speakers A/B buttons TX-SR600/600E onlyListening mode or digital input format indicators Muting indicatorTuning indicators Sleep indicatorRemote controller Remote controller Connections Connections Connecting a compact disc player CD Connecting your audio componentsSignal flow Connections TX-SR700/700EConnecting a DVD Player with 5.1-Channel Output Connecting your video componentsFlow of the video signals is as follows Connecting a DVD player DVD Connecting a DVD Player with 2-Channel L/R Audio OutputConnecting a video cassette recorder Video Monitor OUT Connecting a television monitor or projector Monitor OUTPower amplifier Connecting video camera, etc. Video 4 Input12V Trigger Zone 2 terminal Front right speakerFrom connecting block When using the Zone 2 PRE OUT terminals Connecting the remote zone Zone 2 speakersWhen using the Zone 2 Speakers terminals TX-SR700/700E onlyConnections TX-SR600/600E Video 3 Video White Analog audio output Red Digital audio output coaxial Satellite tuner or television Video 2/3 Front panel OUTPower off function Power on/ready functionConnections TX-SR700/700E/600/600E Direct change functionStandard speaker setup for surround sound Connecting speakersMinimum speaker configuration for surround sound playback Speaker placementConnecting speakers Connecting speakersConnecting a subwoofer Connecting the speaker cableSubwoofer Surround Front Center Right Speaker LeftRight Back Left Speaker Turning on the power Connecting the powerTurning on the power from the remote controller Connecting the included antennas Connecting antennasConnecting the AM antenna cable Assembling the AM loop antennaConnecting an FM outdoor antenna Connecting antennasConnecting an AM outdoor antenna Directional linkageSpeaker Configuration Configuring the speakersReturn Setup Enter Displaying the Main MenuAdjustable Crossover 80/100/120 Hz for Bass Management Configuring the speakersMain menu and then press the Enter button Calibrating the speaker levelsUse the and cursor buttons to select Left Press the Test button to complete the procedure Using the remote controller Press the Test buttonButtons used for navigating through the menus Displaying the Main Menu and exiting the menuTuning into a radio station Listening to a stereo radio station FM modeFM Mode Tuner Tuning Listening to Radio BroadcastsSelecting a preset radio station Presetting a radio stationErasing a preset radio station Listening to Radio BroadcastsListening to RDS broadcasts European models only What is RDS?Listening to RDS broadcasts PTY program types in EuropeDisplaying Radio Text RT Listening to RDS broadcastsPerforming a PTY scan Performing a TP scanSelecting an Audio Component Master VolumeBasic operation TX-SR700/700E ModeSelecting an Audio Component Speakers A/B Rcvr ModeBasic operation TX-SR600/600E Selecting speakers Speakers A, B TX-SR600/ 600E onlyTemporarily changing the speaker output levels Selecting the type of audio input signalTo change the display of the input source from Tape to MD CH SEL Audio SEL Level TAP Tape Audio SelectorListening with headphones Using the sleep time remote controller onlyEnjoying DVD multichannel audio playback TX-SR700/700E onlyTemporarily turning off the sound Switching the displayListening Modes Listening Modes Tip Selecting a listening modeCine Fltr While playing back Dolby Digital 2-channel sourcesOriginal filter CinemaFILTER loading for movies Press the Cine Fltr button on the remote controllerSetup Input SetupMenu Return Digital InputIntelliVolume Input SetupDigital Format MultichannelAnalog/PCM Source Relationship between input source and listening modePCM fs96kHz Source Digital Format SourceOSD Setup OSD Setup and Other SettingsTo display the OSD Setup menu PreferenceSetup Procedure Press the Audio Adjust button Audio AdjustSetting Values Initial value Bass, TrebleAudio Adjust Night Settings possible for each listening modeAdjusting the volume for the remote zone Using the buttons on the TX-SR700/700EEnjoying music in the remote zone TX-SR700/700E only Zone Level Standby Sleep OFFREC OUT Recording a source TX-SR700/700EStart recording at the recording component as desired Recording a source TX-SR600/600E Calling up a preset radio station Using remote controllerRcvr Mode VOL Rcvr Mode VOL MutingOn Standby CD Mode Disc Using remote controllerPress the CD Mode button Controlling an Onkyo CD playerControlling an Onkyo DVD player Press the DVD Mode buttonSearch DVD operation buttons Numeric keysOn Standby MD Mode VCR and TV Mode buttonsTV Mode TV VCR Mode VCR VOL Muting Controlling an Onkyo MD recorderEntering a pre-programming code When entering the code of Onkyo DVD playersLearning a pre-programming code DisplayPre-programming codes Entering a pre-programming codeDVD VCRDVD Mode DVD Player Mode Operating your programmed remote controllerVCR Mode VCR Mode TV Mode TV ModeLight Programming procedureMacro 1 Macro Page Erasing all the commands programmed under a Mode button Erasing the programmed command from one buttonPress and release the same Mode button again Press and release the same button againMacro 1 Rcvr Mode CD Mode Using the macro functionProgramming the macro Executing the macroErasing all commands and macros that have been programmed Using the macro functionErasing a macro from the Macro 1 or 2 button Press the Macro 1 or 2 button againMacro mode programming memo Troubleshooting guide Video and Audio Troubleshooting guideIf one of the messages shown below appears Amplifier Section Tuner Section Specifications TX-SR700/700EOnkyo Europe Electronics GmbH Specifications TX-SR600/600E

TX-SR600/600E, TX-SR700/700E specifications

The Onkyo TX-SR700/700E and TX-SR600/600E are renowned audio/video receivers that have significantly enriched the home theater experience since their release. These models exemplify Onkyo’s dedication to high-fidelity sound and advanced technology, making them a favorite among audiophiles and home theater enthusiasts alike.

A standout feature of the TX-SR700/700E is its exceptional audio performance. It boasts a powerful amplification system, providing 100 watts per channel, ensuring immersive sound that fills the room. Additionally, the receiver supports a variety of surround sound formats, including Dolby Digital, DTS, and Dolby Pro Logic II, allowing users to enjoy their favorite movies, music, and games with impressive clarity and depth.

The TX-SR600/600E, while slightly more compact, still delivers remarkable audio performance. With comparable power, this model maintains high-quality sound output and supports a range of listening modes. Both receivers feature Onkyo's proprietary Wide Range Amplification Technology (WRAT), which enhances dynamic sound reproduction while minimizing distortion, ensuring that even the most delicate audio details are preserved.

Connectivity is another strong point for these models. The TX-SR700/700E and TX-SR600/600E come equipped with a variety of HDMI inputs, allowing seamless integration with modern devices. This feature supports high-definition video and audio transmission, making it easy to connect Blu-ray players, gaming consoles, and streaming devices. Furthermore, the receivers are compatible with older technologies, providing versatility for various home entertainment setups.

One notable characteristic of both models is their robust video processing capabilities. They support up to 1080p video resolution and include advanced scaling features, ensuring that standard-definition content looks stunningly sharp on high-definition displays. Additionally, the user-friendly interface and remote control simplify operation, making it easy for users to navigate settings and adjust audio/video parameters quickly.

The TX-SR700/700E and TX-SR600/600E also incorporate advanced digital technologies such as Audyssey MultEQ, which automatically calibrates the audio settings based on room acoustics, providing an optimized listening experience. This feature is crucial in achieving balanced sound in any room environment.

In conclusion, the Onkyo TX-SR700/700E and TX-SR600/600E are exemplary models that combine power, flexibility, and advanced technology. With their rich sound quality, extensive connectivity options, and user-friendly features, these receivers remain a worthwhile investment for anyone looking to enhance their home theater system. Whether for movie nights, gaming, or casual listening, these Onkyo receivers are poised to deliver an unforgettable audio experience.
Top Page Image Contents