Installation and Connections
Installation using the optional PIONEER stand or installation bracket
ÖPlease be sure to request installation or mounting of this unit or the installation bracket by an installation specialist or the dealer where purchased.
ÖWhen installing, be sure to use the bolts provided with the stand or installation bracket.
ÖFor details concerning installation, please refer to the instruction manual provided with the stand or installation bracket.
Installation using accessories other than the PIONEER stand or installation bracket (sold separately)
ÖWhen possible, please install using parts and accessories manufactured by PIONEER. PIONEER will not he held responsible for accident or damage caused by the use of parts and accessories manufactured by other companies.
ÖFor custom installation, please consult the dealer where the unit was purchased, or a qualified installer.
Wall-mount installation of the unit
This unit has been designed with bolt holes for
ÖBe sure to attach in 4 or more locations above and below, left and right of the center line.
ÖUse bolts that are long enough to be inserted 12 mm to 20 mm into the main unit from the attaching surface for both a holes and b holes. Refer to the side view diagram below.
ÖAs this unit is constructed with glass, be sure to install it on a flat, unwarped surface.
English
b hole
b hole | a hole |
b hole
Air vents (fan)
b hole
a hole
Center line | b hole |
|
Attaching surface
Installation bracket, etc..
Main unit |
| a hole | ||||
|
|
| ||||
Center line |
|
| Bolt | |||
|
| |||||
b hole |
|
|
|
|
| |
|
|
|
| |||
|
|
|
|
|
| |
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
12 mm to 20 mm
Bolt
bhole
12 mm to 20 mm
Installation and Connections
Rear view diagram
CAUTION
To avoid malfunction, overheating of this unit, and possible fire hazard, make sure that the vents on the main unit are not blocked when installing. Also, as hot air is expelled from the air vents, be careful of deterioration and dirt build up on rear surface wall, etc..
CAUTION
Please be sure to use an M8 (Pitch = 1.25 mm) bolt. (Only this size bolt can be used.)
Side view diagram
CAUTION
Because this unit weighs about 40 kg and has little depth making it unstable, please use 2 people or more when packing, carrying or installing.
CAUTION
This unit incorporates a thin design. To ensure safety if vibrated or shaken, please be sure to take measures to prevent the unit from tipping over.
9
<ARE1350> En