Pioneer PDP-502MXE manual Audio connections, Control cord connection, Connecting the speakers

Page 15

Installation and Connections

Audio connections

Before making connections, be sure to check that the component’s power and the unit’s main power is off.

Connecting the speakers

This unit is equipped with speaker output jacks for connection to the speaker system (not supplied) specially designed for use with this unit. Refer to the illustrations below when making connections to the speaker terminals on this unit.

Twist exposed wire strands together.

Push tab to the open position, and insert the wire. Then, close tab firmly to secure the wire in place.

Control cord connection

When control cord connections are made, remote control operation of connected PIONEER components that bear the ë logo mark is done through the remote sensor on this unit.

When the connection is made to the CONTROL IN jack on another unit, the remote sensor of that component will no longer receive signals. Point the remote control unit of the connected component at the remote control sensor on this unit to control.

Notes

ÖMake sure the power is turned off when making connections.

ÖPlease complete all component connections before making control cord connections.

CONTROL

IN

Main unit

OUT

 

English

Note

When making speaker connections, be sure to match the polarities (+ and –) of the speaker terminals on this unit and the corresponding terminals on the speakers. If the polarity is reversed, the sound will be unnatural and lack bass.

Making connections to the audio inputs on this unit

This unit features two audio inputs and one audio output. The following chart shows the inputs and the corresponding audio input jacks.

Video

Audio input jacks

Sound output

input

 

 

INPUT3

Pin jacks

Sound of the selected input

(L/R)

 

is output from the

 

 

INPUT4

Stereo mini jack

• SPEAKER terminals

(L/R)

• Stereo mini jacks (L/R).

 

 

 

 

IN OUT

CONTROL

CONTROL

IN

OUT

CONTROL

IN

OUT

The control cables (not supplied) are monaural cables with mini plugs (no resistance).

Installation and Connections

11

<ARE1350> En

Page 14 Page 16
Image 15
Page 14 Page 16
Contents PDP-502MXE Page Basic Operations English Safety PrecautionsContents FeaturesHow to Use This Manual Before ProceedingAbout operations in this manual Checking supplied accessories Remote control unitOperating Instructions Before Proceeding Main unit Part Names and FunctionsMain unit Operation panel on the main unitRemote control unit Connection panel ~ Speaker L terminal Main Power switchSet this unit in the stand Installation and ConnectionsInstallation of the unit Installation using the supplied display standWall-mount installation of the unit Rear view diagramSide view diagram Connection of separate Sync analog RGB source When connecting to INPUT3When connecting to INPUT4 When connecting to INPUT4 OutputMaking connections to the audio inputs on this unit Connecting the speakersAudio connections Control cord connectionTo attach the speed clamps to the main unit Power cord connectionHow to route cables Organize cables together using the provided speed clampsSetup of G on Sync Clamp connection Press STANDBY/ON to put this unit in the operation mode OperationsBefore you begin, make sure you have To mute the sound To adjust the volumeTo confirm display settings Press Muting on the remote control unitNormal Screen size selectionChanging the screen size Press Screen Size to select the sizeMenu screen To put the unit in operation mode againPress SET to select the Power Save mode Press 5/ to select PCDisplay Panel Adjustments Adjusting the picture qualityTo reset Picture mode settings to the default Screen mode adjustment items Adjusting the display imageTo reset Screen mode settings to the default Press 2/3 to carry out the adjustmentPress 5/ to select SET UP, then press SET Display Panel Adjustments Press 5/ to select ABLMaking the PC image brighter ABL Press 2 to select YES, then press SET Resetting the unit to factory set defaultsPress 2/3 to adjust Press 5/ to select H. Enhance or V. ENHANCE, then press SETCleaning Inserting the batteries in the remote control unitAdditional Information Operating range of the remote control unit TroubleshootingGeneral Problems Information Problems commonly mistaken as breakdownAbout the self diagnosis mode Additional cautionsGeneral SpecificationsAccessories Panel sticking and after-image lagSupplement PC signal compatibilty table INPUT3, INPUT4Aspect ratio Explanation of TermsCommencer Precautions de securiteFrance tapez 36 15 Pioneer

PDP-502MXE specifications

The Pioneer PDP-502MXE is a remarkable plasma display panel that garnered attention in the home entertainment market due to its superior image quality and exceptional design. Launched in the early 2000s, the PDP-502MXE was a leading model in Pioneer’s lineup of high-definition plasma televisions, showcasing cutting-edge technology that set new standards in the industry.

One of the standout features of the PDP-502MXE is its 50-inch screen, which makes it an ideal choice for home theaters and larger living spaces. The display boasts a native resolution of 1024x768 pixels, providing stunning image clarity and detail. The plasma technology employed in this model allows for deep blacks and vibrant colors, delivering a dynamic range that enhances movie-watching experiences and visual content.

The PDP-502MXE supports multiple aspect ratios and allows users to choose between 4:3 and 16:9, making it versatile for various types of media. It comes equipped with advanced video processing capabilities, ensuring that even lower-resolution signals are upscaled effectively, resulting in a smooth viewing experience. The inclusion of a range of inputs, such as HDMI and component video, makes it compatible with many external devices, including DVD players and gaming consoles.

Additionally, Pioneer integrated their proprietary technologies into the PDP-502MXE, such as the PureCinema technology, which improves motion handling by reducing blurriness during fast-moving scenes. The display also features a filter that minimizes reflections, allowing it to perform admirably in different lighting conditions.

The PDP-502MXE’s design is another highlight, featuring an ultra-slim profile that enhances its aesthetic appeal. The panel's industrial design is complemented by minimal bezels, making it a stylish addition to any home setup. The build quality of the PDP-502MXE reflects its premium positioning, ensuring durability alongside functionality.

In summary, the Pioneer PDP-502MXE is a powerful plasma display that combines impressive visual performance with sleek design. Its advancing technologies, compatibility with various media formats, and stylish aesthetics make it an enduring choice for enthusiasts of high-quality home entertainment systems. Although newer technologies have emerged since its release, the PDP-502MXE continues to be remembered for its significant contributions to the evolution of display technology.
Top Page Image Contents