Pioneer PDP-502MXE manual Additional Information, Cleaning

Page 26

Additional Information

English

Cleaning

Regular cleaning will extend the life and performance of this unit. The recommended way to clean the display and related parts is described below.

Before cleaning, be sure to unplug the power cord from the power outlet.

Cleaning the display panel body and remote control

Do not under any circumstances use solvents such as benzine or thinner for cleaner. Use of such liquids may cause deterioration or peeling of paint from the display or remote control unit.

Wipe the display and remote control gently with a soft cloth. In the case of excessive dirt buildup, dampen a soft cloth with a diluted neutral cleaning detergent and after wringing the cloth thoroughly, wipe the component and then dry it with a dry soft cloth.

Inserting the batteries in the remote control unit

While pressing down lightly, slide in the direction of the arrow.

Two AA (R6) batteries

Additional Information

Cleaning the screen

After dusting, wipe the screen gently using the supplied cleaning cloth or a soft cloth. Do not use tissue or a rough cloth. As the surface of the screen is easily scratched, do not rub it or hit it with a hard object.

Cleaning the vents

As a general rule, use a vacuum cleaner about once a month to clean the vents on the rear panel of the display of dust buildup (set the vacuum cleaner to its weakest setting when doing this).

Using the unit without cleaning it of dust will cause the internal temperature to increase, resulting in possible breakdown or fire.

Vents

 

Vents

 

 

 

 

 

 

 

 

Vents

When handling the remote control unit

¦Do not drop or shake the remote control.

¦Do not use the remote control unit in a location subject to direct sunlight, heat radiation from a heater, or in a place subject to excessive humidity.

¦When the remote control unit’s batteries begin to wear out, the operable distance will gradually become shorter. When this occurs, replace all batteries with new ones as soon as possible.

CAUTION

¦Insert batteries so that the plus (+) and minus (–) sides are aligned according to the markings in the battery case.

¦Do not mix new batteries with used ones.

¦The voltage of batteries may differ even if they are the same shape. Please do not mix different kinds of batteries together.

¦When not using the remote control unit for a long period of time (1 month or more), remove the batteries from the remote control unit to prevent leaking of battery fluid. If battery liquid has leaked, thoroughly wipe the inside of the case until all liquid is removed, and then insert new batteries.

¦Do not charge, short, disassemble or throw the provided batteries in a fire.

VentsVents

22

<ARE1350> En

Page 25 Page 27
Image 26
Page 25 Page 27
Contents PDP-502MXE Page Basic Operations Safety Precautions EnglishFeatures ContentsAbout operations in this manual How to Use This ManualBefore Proceeding Operating Instructions Before Proceeding Checking supplied accessoriesRemote control unit Operation panel on the main unit Part Names and FunctionsMain unit Main unitRemote control unit Connection panel Main Power switch ~ Speaker L terminalInstallation using the supplied display stand Installation and ConnectionsInstallation of the unit Set this unit in the standSide view diagram Wall-mount installation of the unitRear view diagram When connecting to INPUT4 Output When connecting to INPUT3When connecting to INPUT4 Connection of separate Sync analog RGB sourceControl cord connection Connecting the speakersAudio connections Making connections to the audio inputs on this unitOrganize cables together using the provided speed clamps Power cord connectionHow to route cables To attach the speed clamps to the main unitSetup of G on Sync Clamp connection Before you begin, make sure you have Press STANDBY/ON to put this unit in the operation modeOperations Press Muting on the remote control unit To adjust the volumeTo confirm display settings To mute the soundPress Screen Size to select the size Screen size selectionChanging the screen size NormalPress 5/ to select PC To put the unit in operation mode againPress SET to select the Power Save mode Menu screenTo reset Picture mode settings to the default Display Panel AdjustmentsAdjusting the picture quality Press 2/3 to carry out the adjustment Adjusting the display imageTo reset Screen mode settings to the default Screen mode adjustment itemsMaking the PC image brighter ABL Press 5/ to select SET UP, then press SETDisplay Panel Adjustments Press 5/ to select ABL Press 5/ to select H. Enhance or V. ENHANCE, then press SET Resetting the unit to factory set defaultsPress 2/3 to adjust Press 2 to select YES, then press SETAdditional Information CleaningInserting the batteries in the remote control unit General Problems Operating range of the remote control unitTroubleshooting Additional cautions Problems commonly mistaken as breakdownAbout the self diagnosis mode InformationPanel sticking and after-image lag SpecificationsAccessories GeneralPC signal compatibilty table INPUT3, INPUT4 SupplementExplanation of Terms Aspect ratioPrecautions de securite CommencerFrance tapez 36 15 Pioneer

PDP-502MXE specifications

The Pioneer PDP-502MXE is a remarkable plasma display panel that garnered attention in the home entertainment market due to its superior image quality and exceptional design. Launched in the early 2000s, the PDP-502MXE was a leading model in Pioneer’s lineup of high-definition plasma televisions, showcasing cutting-edge technology that set new standards in the industry.

One of the standout features of the PDP-502MXE is its 50-inch screen, which makes it an ideal choice for home theaters and larger living spaces. The display boasts a native resolution of 1024x768 pixels, providing stunning image clarity and detail. The plasma technology employed in this model allows for deep blacks and vibrant colors, delivering a dynamic range that enhances movie-watching experiences and visual content.

The PDP-502MXE supports multiple aspect ratios and allows users to choose between 4:3 and 16:9, making it versatile for various types of media. It comes equipped with advanced video processing capabilities, ensuring that even lower-resolution signals are upscaled effectively, resulting in a smooth viewing experience. The inclusion of a range of inputs, such as HDMI and component video, makes it compatible with many external devices, including DVD players and gaming consoles.

Additionally, Pioneer integrated their proprietary technologies into the PDP-502MXE, such as the PureCinema technology, which improves motion handling by reducing blurriness during fast-moving scenes. The display also features a filter that minimizes reflections, allowing it to perform admirably in different lighting conditions.

The PDP-502MXE’s design is another highlight, featuring an ultra-slim profile that enhances its aesthetic appeal. The panel's industrial design is complemented by minimal bezels, making it a stylish addition to any home setup. The build quality of the PDP-502MXE reflects its premium positioning, ensuring durability alongside functionality.

In summary, the Pioneer PDP-502MXE is a powerful plasma display that combines impressive visual performance with sleek design. Its advancing technologies, compatibility with various media formats, and stylish aesthetics make it an enduring choice for enthusiasts of high-quality home entertainment systems. Although newer technologies have emerged since its release, the PDP-502MXE continues to be remembered for its significant contributions to the evolution of display technology.
Top Page Image Contents