Onkyo TX-SR508 Connecting Components with Hdmi, Audio return channel ARC function

Page 15

Connecting Components with HDMI

VCR or DVD recorder/Digital Video Recorder

Game console

TV, projector, etc.

Satellite, cable, set-top box, etc.

Blu-ray Disc/DVD player

Connect your components to the appropriate jacks. The default input assignments are shown below. ✔: Assignment can be changed (➔ 35).

Jack

 

Signal

Components

Assignable

Input

HDMI IN1

Audio/Video

Blu-ray Disc/DVD player

✔

 

HDMI IN2

 

VCR or DVD recorder/Digital Video Recorder

✔

 

HDMI IN3

 

Satellite, cable, set-top box, etc.

✔

 

HDMI IN4

 

Game console

✔

Output

HDMI OUT

 

TV, projector, etc.

 

Refer to “About HDMI” (➔ 61) and “Using an RIHD-compatible TV, Player, or Recorder” (➔ 62).

Tip

To listen to audio received by the HDMI IN jacks through your TV’s speakers:

•Set the “TV Control” setting to “On” (➔ 42) for an p-compatible TV.

•Set the “Audio TV OUT” setting to “On” (➔ 41) when the TV is not compatible with por the “TV Control” setting to “Off”.

•Set your Blu-ray Disc/DVD player’s HDMI audio output setting to PCM.

•To listen to TV audio through the AV receiver, see “Connecting External Components” (➔ 16).

Note

•When listening to an HDMI component through the AV receiver, set the HDMI component so that its video can be seen on the TV screen (on the TV, select the input of the HDMI component connected to the AV receiver). If the TV power is off or the TV is set to another input source, this may result in no sound from the AV receiver or the sound may be cut off.

•When the “Audio TV OUT” setting is set to “On” (➔ 41) to hear from your TV’s speakers, by controlling the AV receiver’s volume, the sound will be output from the AV receiver’s speakers, too. When the “TV Control” setting is set to “On” (➔ 42) to hear from speakers of p-compatible TV, by controlling the AV receiver’s volume, the AV receiver’s speakers will produce sound while the TV’s speakers are muted. To stop the AV receiver’s speakers producing sound, change the settings, change your TV’s settings, or turn down the AV receiver’s volume.

■Audio return channel (ARC) function

Audio return channel (ARC) function enables an HDMI capable TV to send the audio stream to the HDMI OUT of the AV receiver. To use this function, you must select the TV/CD input selector.

•To use ARC function, you must select the TV/CD input selector, your TV must support ARC function and “HDMI Control” is set to “On” (➔ 42).

En

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents TX-SR508 Away from the rear panel or wall, creating a flue-like Always consider the environmental issues and follow10 cm 4 at the rear. The rear edge of the shelf or Board above the apparatus shall be set 10 cmPrecautions Aiming the Remote Controller Supplied AccessoriesUsing the Remote Controller Installing the BatteriesContents Miscellaneous FeaturesAmplifier ProcessingFront Panel Front & Rear PanelsRear Panel Power cordUREMOTE Control jack DisplayControlling the tuner Remote ControllerControlling the AV Receiver Return buttonEnjoying Home Theater About Home TheaterSpeaker Connection Precautions Connecting the AV ReceiverConnecting Your Speakers Speaker ConfigurationConnecting the Speaker Cables Screw-type speaker terminals Strip 1/2 to 5/8 12 to 15 mmInsulation from the ends Bi-amping the Front Speakers Connecting a Powered SubwooferHdmi cable About AV ConnectionsConnected image with AV components AV Cables and JacksConnecting Components with Hdmi Jack Signal ComponentsAudio return channel ARC function Connecting External Components How to record the videoJack Signal Components Assignable Remote Control Using the AUX Input jacks on the front panelConnecting Onkyo uComponents System On/Auto Power OnConnecting Antenna North American models European and Asian modelsAssembling the AM loop antenna Video Connection Formats On-screen setup menus are displayed whenDepends on the Audio TV OUT setting Which Connections Should I Use?Turning On/Off the AV Receiver Turning OnTurning Off Playing the Connected Component Using the Music OptimizerSetting the Display Brightness Basic OperationsChanging the Input Display Using the Sleep TimerUsing Headphones Muting the AV ReceiverUsing Audyssey 2EQ Audyssey 2EQ Room Correction Speaker SetupError Messages Changing the Speaker Settings ManuallyUsing a Powered Subwoofer Listening to the Radio Using the TunerTuning into Radio Stations Listening to the RadioUsing RDS excluding North American models Presetting FM/AM StationsFinding Stations by Type PTY Listening to Traffic News TPRDS program types PTY AV Recording Connecting a Recording ComponentRecording Recording Separate AV SourcesUsing the Listening Modes Listening Mode ButtonsSelecting Listening Modes Speaker Layout About Listening ModesExplanatory Notes Input SourceListening Modes DSD *7 Resolution AudioDTS-HD Master DTS ExpressOnkyo-Original DSP Listening Modes Advanced Setup On-screen Setup MenusCommon Procedures in Setup Menu Subwoofer Hdmi InputComponent Component Video Input Digital Audio Digital Audio InputCrossover Crossover Frequency Sp Config Speaker ConfigurationFront SurrBack ChAudio Adjust Multiplex/Mono SettingsSp Distance Speaker Distance Dolby Settings DTS SettingAudyssey Settings Dynamic Volume Dynamic EQReference Level Hardware Theater-Dimensional SettingSpeaker Settings Name EditSirius Settings North American models Hdmi SetupRemote Control Settings FM/AM Frequency Setup SettingsTV Control Power ControlHdmi Control Rihd Audio Return Ch ARCLate Night Function Using the Audio SettingsTone Control Settings Speaker LevelsCinemaFILTER Audio SelectorSync Digital Input Signal Formats Adjusting the Bass & TrebleBass Treble Zone Connecting ZoneConnecting Your Zone 2 Speakers Directly to the AV receiver Connecting Your Zone 2 Speakers to an Amp in ZoneSetting the Powered Zone Using Zone Controlling Zone 2 from the AV receiverFront High or ZONE2 L/R speaker ter Muting Zones Controlling Zone 2 with the Remote ControllerAdjusting the Volume for Zone Operating with the remote controllerOnkyo Dock Cable Connecting an Onkyo DockControlling iPod Models sold are different depending on the regionUP-A1 Dock Using the Onkyo DockWith the RI Control Controlling Your iPodRI Dock Without the RI ControlAvailable buttons Controlling Other Components Preprogrammed Remote Control CodesEntering Remote Control Codes Remote Control Codes for Onkyo Components Connected via uControlling Other Components Resetting Remote Mode ButtonsResetting the Remote Controller You can reset the remote controller to its default settingsCH + Disc + Cassettetape deckTV VOL q/w Number +10There’s no sound, or it’s very quiet TroubleshootingStandby indicator flashes red Can’t turn on the AV receiverCan’t select the Pure Audio listening mode There’s no sound with a certain signal formatVolume cannot be set to About DTS signalsOn-screen menus don’t appear Remote controller doesn’t workAV receiver’s remote controller doesn’t control your iPod There’s no picture from a source connected to an HdmiHow do I change the language of a multiplex source Sound changes when I connect my headphonesCan’t record Display doesn’t workTuner Section SpecificationsAmplifier Section Video SectionAbout Hdmi Supported Audio FormatsAbout Copyright Protection Using an RIHD-compatible TV, Player, or Recorder About p-compatible componentsOperations that can be performed with p connection Operate with the remote controller How to connect and setupConfirm the connecting and setting Confirm the settingsOnkyo Europe Electronics GmbH UK Branch Onkyo Europe Electronics GmbH

TX-SR508 specifications

The Onkyo TX-SR508 is a versatile home theater receiver designed for audiophiles looking to enhance their audio-visual experience. This model stands out in its class due to its combination of advanced features, high-quality build, and user-friendly operation.

One of the primary features of the TX-SR508 is its capability to decode multiple high-definition audio formats. Supporting Dolby TrueHD and DTS-HD Master Audio, the receiver ensures that users enjoy a cinematic sound experience, delivering a clear and immersive audio performance. Additionally, it offers Dolby Pro Logic IIz, which enhances the surround sound experience by adding front height channels, enriching the overall soundstage.

The TX-SR508 is equipped with a powerful amplifier that provides 75 watts per channel across seven channels, ensuring that it can adequately drive a full home theater speaker setup. With impedance options of 4 to 16 ohms, it is versatile enough to work with a variety of speaker systems.

Connectivity is another strong suit of the Onkyo TX-SR508. It features multiple HDMI inputs, enabling users to connect various high-definition devices, such as Blu-ray players, gaming consoles, and streaming devices. The HDMI 1.4a standard used in this receiver supports 3D video pass-through, making it future-proof for the current generation of home theater setups.

For those who still enjoy traditional sources, it includes analog audio inputs, as well as a phono input for connecting a turntable, catering to vinyl enthusiasts. The built-in AM/FM tuner and the capability to connect to an external internet radio enrich the listening options available to users.

Integrated technologies such as Audyssey 2EQ speaker calibration assist in optimizing sound for the room environment, providing a balanced audio experience regardless of the room's acoustics. The receiver also boasts an intuitive graphical user interface, making setup and navigation straightforward for users of all levels.

Overall, the Onkyo TX-SR508 combines cutting-edge audio technologies, extensive connectivity options, and practical features, making it a solid choice for anyone looking to build or upgrade their home theater system. Whether enjoying a movie, gaming, or listening to music, the TX-SR508 ensures an impressive performance, grounded in both quality and versatility.
Top Page Image Contents